Molds - Christmas & Religions
Assorted Christmas silicone mold in the shapes of Santa hat, gloves and stocking. No releasing agent is needed, finished work can be easily pop out...
Sold Out
{"id":10337218625,"title":"Small Christmas Silicone Mold (6 Cavity) | Mini Santa Hat Mold | Christmas Stocking Mold | Christmas Gloves Mold | Resin Craft Supplies","handle":"small-christmas-silicone-mold-6-cavity-mini-santa-hat-mold-christmas-stocking-mold-christmas-gloves-mold-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Christmas silicone mold in the shapes of Santa hat, gloves and stocking. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Hat: approx. 1.1cm (W) x 1.3cm (L) \/ 0.43\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Gloves: approx. 0.9cm (W) x 1.4cm (L) \/ 0.35\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Stocking: approx. 1.2cm (W) x 1.4cm (L) \/ 0.47\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QK4epTS8rKo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T19:36:54-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas gloves","christmas hat","christmas mold","christmas sock","christmas socks","Christmas stocking","christmas stockings","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","santa claus","silicone mold","soft mold","UV Resin"],"price":249,"price_min":249,"price_max":249,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38648195073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD020A","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Small Christmas Silicone Mold (6 Cavity) | Mini Santa Hat Mold | Christmas Stocking Mold | Christmas Gloves Mold | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":249,"weight":24,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD020A.jpg?v=1517671486"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD020A.jpg?v=1517671486","options":["Title"],"media":[{"alt":"Small Christmas Silicone Mold (6 Cavity) | Mini Santa Hat Mold | Christmas Stocking Mold | Christmas Gloves Mold | Resin Craft Supplies - MiniatureSweet","id":422580060209,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD020A.jpg?v=1517671486"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD020A.jpg?v=1517671486","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Christmas silicone mold in the shapes of Santa hat, gloves and stocking. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Hat: approx. 1.1cm (W) x 1.3cm (L) \/ 0.43\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Gloves: approx. 0.9cm (W) x 1.4cm (L) \/ 0.35\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e- Stocking: approx. 1.2cm (W) x 1.4cm (L) \/ 0.47\" (W) x 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QK4epTS8rKo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin,...
$0.99 USD
{"id":10335640705,"title":"Christmas Hat Mold | Santa Claus Hat Silicone Mould | Clear UV Resin Mold | Soft Mold | Christmas Decoden (21mm x 19mm)","handle":"christmas-hat-mold-santa-claus-hat-silicone-mould-clear-uv-resin-mold-soft-mold-christmas-decoden","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.1cm (W) x 1.9cm (L) \/ 0.83\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T02:57:55-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas hat","christmas mold","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","santa claus hat","silicone mold","soft mold","UV Resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38642519169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD681A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Christmas Hat Mold | Santa Claus Hat Silicone Mould | Clear UV Resin Mold | Soft Mold | Christmas Decoden (21mm x 19mm)","public_title":null,"options":["Default Title"],"price":99,"weight":4,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD681A.jpg?v=1517671479"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD681A.jpg?v=1517671479","options":["Title"],"media":[{"alt":"Christmas Hat Mold | Santa Claus Hat Silicone Mould | Clear UV Resin Mold | Soft Mold | Christmas Decoden (21mm x 19mm) - MiniatureSweet","id":422468026417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD681A.jpg?v=1517671479"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD681A.jpg?v=1517671479","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.1cm (W) x 1.9cm (L) \/ 0.83\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas silicone mold assortment. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
$6.99 USD
{"id":7208480309401,"title":"Assorted Christmas Ornament Silicone Mold (24 Cavity) | Gingerbread Man Snowman Reindeer Peppermint Candy Wreath Mould | Resin Art Supplies","handle":"assorted-christmas-ornament-silicone-mold-gingerbread-man-snowman-reindeer-peppermint-candy-wreath-mould-resin-art-supplies","description":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eChristmas silicone mold assortment. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5cm to 5.8cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-11-30T15:34:14-11:00","created_at":"2021-11-30T15:27:47-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["apple","cabochon mold","christmas charm","christmas gift","christmas hat","christmas mold","Christmas Ornament","Christmas Ornaments","christmas present","christmas tree","christmas wreath","Clear Mold","decoden mold","epoxy resin","Flexible Mold","gingerbread man","moon","peppermint candy","reindeer","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","snowman","soft mold","UV resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41560965218457,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD5065A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Assorted Christmas Ornament Silicone Mold (24 Cavity) | Gingerbread Man Snowman Reindeer Peppermint Candy Wreath Mould | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":699,"weight":134,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_4de062ae-660a-4066-afa3-b2c1db2ba21b.jpg?v=1638325694","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_b028a95e-87db-4ecd-8fb7-4eb57cb864e0.jpg?v=1638325694"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_4de062ae-660a-4066-afa3-b2c1db2ba21b.jpg?v=1638325694","options":["Title"],"media":[{"alt":"Assorted Christmas Ornament Silicone Mold (24 Cavity) | Gingerbread Man Snowman Reindeer Peppermint Candy Wreath Mould | Resin Art Supplies - MiniatureSweet","id":25489063248025,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_4de062ae-660a-4066-afa3-b2c1db2ba21b.jpg?v=1638325694"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_4de062ae-660a-4066-afa3-b2c1db2ba21b.jpg?v=1638325694","width":600},{"alt":"Assorted Christmas Ornament Silicone Mold (24 Cavity) | Gingerbread Man Snowman Reindeer Peppermint Candy Wreath Mould | Resin Art Supplies - MiniatureSweet","id":25489063215257,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_b028a95e-87db-4ecd-8fb7-4eb57cb864e0.jpg?v=1638325694"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_b028a95e-87db-4ecd-8fb7-4eb57cb864e0.jpg?v=1638325694","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv id=\"tab_detail\" class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cp\u003eChristmas silicone mold assortment. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5cm to 5.8cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin,...
$1.19 USD
{"id":10335642305,"title":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm)","handle":"santa-claus-hat-mold-christmas-silicone-mold-uv-resin-soft-mould-kawaii-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 2.9cm (L) \/ 1.18\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T03:07:56-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas hat","christmas mold","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","santa claus hat","silicone mold","soft mold","UV Resin"],"price":119,"price_min":119,"price_max":119,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38642523073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD682A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm)","public_title":null,"options":["Default Title"],"price":119,"weight":5,"compare_at_price":null,"inventory_quantity":47,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481","options":["Title"],"media":[{"alt":"Santa Claus Hat Mold | Christmas Silicone Mold | UV Resin Soft Mould | Kawaii Resin Craft Supplies (30mm x 29mm) - MiniatureSweet","id":422468059185,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD682A.jpg?v=1517671481","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eChristmas Santa Claus hat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (W) x 2.9cm (L) \/ 1.18\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}