Products
Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon Mold ★Measurement: approx. 1.1cm (Diameter)★ No...
Sold Out
{"id":5530304577,"title":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743","handle":"decoden-supplies-ice-cream-scoop-11mm-silicone-flexible-mold-kawaii-miniature-sweets-fimo-polymer-clay-jewelry-charms-diy-cabochon-md743","description":"\u003cp\u003eDecoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.1cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:01:00-11:00","created_at":"2016-03-26T02:01:06-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold","tags":["cabochon mold","cell phone deco mold","decoden mold","embellishment molds","flexible mold","gelatto mold","Handmade","ice cream mold","kawaii supplies","mini food mold","miniature mold","Polymer Clay","sculpey mold","silicone mold","sundae mold","Supplies"],"price":395,"price_min":395,"price_max":395,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943802945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD743","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743","public_title":null,"options":["Default Title"],"price":395,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090893.jpeg?v=1517631338","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090894.jpeg?v=1517631338","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272516855.jpeg?v=1517631338","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090895.jpeg?v=1517631338","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090896.jpeg?v=1517631338"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090893.jpeg?v=1517631338","options":["Title"],"media":[{"alt":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743 - MiniatureSweet","id":107542904881,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090893.jpeg?v=1517631338"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090893.jpeg?v=1517631338","width":600},{"alt":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743 - MiniatureSweet","id":107542937649,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090894.jpeg?v=1517631338"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090894.jpeg?v=1517631338","width":600},{"alt":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743 - MiniatureSweet","id":107542970417,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272516855.jpeg?v=1517631338"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272516855.jpeg?v=1517631338","width":1218},{"alt":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743 - MiniatureSweet","id":107543003185,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090895.jpeg?v=1517631338"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090895.jpeg?v=1517631338","width":600},{"alt":"Decoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon MD743 - MiniatureSweet","id":107543035953,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090896.jpeg?v=1517631338"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192090896.jpeg?v=1517631338","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDecoden Supplies Ice Cream Scoop 11mm Silicone Flexible Mold Kawaii Miniature Sweets Fimo Polymer Clay Jewelry Charms DIY Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.1cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Decorative cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon...
$3.99 USD
{"id":10114863553,"title":"Decorative Cross Silicone Mold (4 Cavity) | Christian Religion Cabochon Mold | Christmas Flexible Mold | Halloween Decoration | Epoxy Resin Mould","handle":"decorative-cross-silicone-mold-4-cavity-christian-religion-cabochon-mold-christmas-flexible-mold-halloween-decoration-epoxy-resin-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eDecorative cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Left: approx. 3.3cm (W) x 4.6cm (L) \/ 1.3\" (W) x 1.81\" (L)\u003c\/p\u003e\n\u003cp\u003e- Middle (Top): approx. 2.2cm (W) x 3.1cm (L) \/ 0.87\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e- Middle (Bottom): approx. 2.4cm (W) x 3.6cm (L) \/ 0.94\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e- Right: approx. 3.3cm (W) x 4.3cm (L) \/ 1.3\" (W) x 1.69\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-09-05T02:26:16-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["Baptism","cabochon mold","catholic cross","christian cross","christmas mold","cross charm","Cross Mold","cross pendant","crosses","decoden mold","decorative cross","Flexible Mold","halloween mold","Kawaii Goth","religion mold","Religious","resin art","resin crafts","resin mold","resin mould","silicone mold","vintage cross"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37679396289,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2136","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Decorative Cross Silicone Mold (4 Cavity) | Christian Religion Cabochon Mold | Christmas Flexible Mold | Halloween Decoration | Epoxy Resin Mould","public_title":null,"options":["Default Title"],"price":399,"weight":57,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2136.jpg?v=1517671028"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2136.jpg?v=1517671028","options":["Title"],"media":[{"alt":"Decorative Cross Silicone Mold (4 Cavity) | Christian Religion Cabochon Mold | Christmas Flexible Mold | Halloween Decoration | Epoxy Resin Mould - MiniatureSweet","id":396429721649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2136.jpg?v=1517671028"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2136.jpg?v=1517671028","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eDecorative cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Left: approx. 3.3cm (W) x 4.6cm (L) \/ 1.3\" (W) x 1.81\" (L)\u003c\/p\u003e\n\u003cp\u003e- Middle (Top): approx. 2.2cm (W) x 3.1cm (L) \/ 0.87\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e- Middle (Bottom): approx. 2.4cm (W) x 3.6cm (L) \/ 0.94\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e- Right: approx. 3.3cm (W) x 4.3cm (L) \/ 1.3\" (W) x 1.69\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted heart silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy...
$3.99 USD
$3.49 USD
{"id":7083729191065,"title":"DEFECT Assorted Heart Silicone Mold (5 Cavity) | Valentine's Day Embellishment Mould | Decoden Cabochon DIY | Resin Craft Supplies","handle":"assorted-heart-silicone-mold-valentines-day-embellishment-mould-decoden-cabochon-diy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted heart silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the biggest heart is bit dis-shaped. You can use a book or similar item to push against the wall of the mold to make it straight.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.9cm x 1.6cm, 3.3cm x 2.9cm, 4.3cm x 3.7cm and 5.4cm x 4.8cm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-09-14T20:20:10-11:00","created_at":"2021-09-14T19:08:41-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","heart mold","love","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","uv resin","valentine's day","wedding supplies"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":41109002616985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD6007B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Assorted Heart Silicone Mold (5 Cavity) | Valentine's Day Embellishment Mould | Decoden Cabochon DIY | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":349,"weight":95,"compare_at_price":399,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_50d27dec-a76e-46f9-95b6-edc471c23283.jpg?v=1631727558","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_16e2c2b1-715a-4d49-ad9a-ae9deb2cd783.jpg?v=1631727559"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_50d27dec-a76e-46f9-95b6-edc471c23283.jpg?v=1631727558","options":["Title"],"media":[{"alt":"DEFECT Assorted Heart Silicone Mold (5 Cavity) | Valentine's Day Embellishment Mould | Decoden Cabochon DIY | Resin Craft Supplies - MiniatureSweet","id":24366100938905,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_50d27dec-a76e-46f9-95b6-edc471c23283.jpg?v=1631727558"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_50d27dec-a76e-46f9-95b6-edc471c23283.jpg?v=1631727558","width":600},{"alt":"DEFECT Assorted Heart Silicone Mold (5 Cavity) | Valentine's Day Embellishment Mould | Decoden Cabochon DIY | Resin Craft Supplies - MiniatureSweet","id":24366100906137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_16e2c2b1-715a-4d49-ad9a-ae9deb2cd783.jpg?v=1631727559"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_16e2c2b1-715a-4d49-ad9a-ae9deb2cd783.jpg?v=1631727559","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted heart silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the biggest heart is bit dis-shaped. You can use a book or similar item to push against the wall of the mold to make it straight.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.9cm x 1.6cm, 3.3cm x 2.9cm, 4.3cm x 3.7cm and 5.4cm x 4.8cm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted heart, star and moon silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold....
$4.99 USD
$4.49 USD
{"id":7083911577753,"title":"DEFECT Assorted Heart Star Moon Silicone Mold (9 Cavity) | Kawaii Decoden Cabochon Making | Resin Embellishment Mould | Resin Art DIY","handle":"assorted-heart-star-moon-silicone-mold-kawaii-decoden-cabochon-making-resin-embellishment-mould-resin-art-diy","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eAssorted heart, star and moon silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e*Note that this is a defective item, the moons are a bit dis-shaped. You can use a book or similar item to push against the wall of the mold to make it straight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 1.8cm x 1.6cm, 3.2cm x 2.7cm, 4.3cm x 3.8cm\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm x 1.8cm, 2.9cm x 2.8cm, 3.9cm x 3.7cm\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 1.6cm x 1.9cm, 2.5cm x 2.9cm, 3.4cm x 3.9cm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-09-14T20:20:14-11:00","created_at":"2021-09-14T20:08:37-11:00","vendor":"MiniatureSweet","type":"Star Mold, Heart Mold, Other Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","heart mold","love","magical girl","mahou kei","moon mold","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","star mold","uv resin","valentine's day","wedding supplies"],"price":449,"price_min":449,"price_max":449,"available":true,"price_varies":false,"compare_at_price":499,"compare_at_price_min":499,"compare_at_price_max":499,"compare_at_price_varies":false,"variants":[{"id":41109715320985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD6025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Assorted Heart Star Moon Silicone Mold (9 Cavity) | Kawaii Decoden Cabochon Making | Resin Embellishment Mould | Resin Art DIY","public_title":null,"options":["Default Title"],"price":449,"weight":117,"compare_at_price":499,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_fd5312fe-6980-405d-bdcf-0d7dc1f7c422.jpg?v=1631727561","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_5e17ea8c-621f-49e2-8677-4d547d656c5a.jpg?v=1631727562"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_fd5312fe-6980-405d-bdcf-0d7dc1f7c422.jpg?v=1631727561","options":["Title"],"media":[{"alt":"DEFECT Assorted Heart Star Moon Silicone Mold (9 Cavity) | Kawaii Decoden Cabochon Making | Resin Embellishment Mould | Resin Art DIY - MiniatureSweet","id":24366808039577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_fd5312fe-6980-405d-bdcf-0d7dc1f7c422.jpg?v=1631727561"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_fd5312fe-6980-405d-bdcf-0d7dc1f7c422.jpg?v=1631727561","width":600},{"alt":"DEFECT Assorted Heart Star Moon Silicone Mold (9 Cavity) | Kawaii Decoden Cabochon Making | Resin Embellishment Mould | Resin Art DIY - MiniatureSweet","id":24366808006809,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_5e17ea8c-621f-49e2-8677-4d547d656c5a.jpg?v=1631727562"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_5e17ea8c-621f-49e2-8677-4d547d656c5a.jpg?v=1631727562","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eAssorted heart, star and moon silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e*Note that this is a defective item, the moons are a bit dis-shaped. You can use a book or similar item to push against the wall of the mold to make it straight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 1.8cm x 1.6cm, 3.2cm x 2.7cm, 4.3cm x 3.8cm\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm x 1.8cm, 2.9cm x 2.8cm, 3.9cm x 3.7cm\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 1.6cm x 1.9cm, 2.5cm x 2.9cm, 3.4cm x 3.9cm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in cotton candy shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti,...
Sold Out
{"id":770143813681,"title":"DEFECT Cotton Candy Shaker Mold | Kawaii Resin Shaker Charm Mould | Whimsical Sweet Deco | Resin Craft Supplies (46mm x 62mm)","handle":"cotton-candy-shaker-mold-kawaii-resin-shaker-charm-mould-whimsical-sweet-deco-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in cotton candy shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.6cm (W) x 6.2cm (L) \/ 1.81\" (W) x 2.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:36-11:00","created_at":"2018-05-15T00:08:51-11:00","vendor":"MiniatureSweet","type":"Candy Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","cotton candy mold","decoden supplies","dessert","epoxy resin","flexible mold","food","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","soft mold","sweet mold","sweets deco","UV resin","waterfall charm"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":499,"compare_at_price_min":499,"compare_at_price_max":499,"compare_at_price_varies":false,"variants":[{"id":8699289108529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1168","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Cotton Candy Shaker Mold | Kawaii Resin Shaker Charm Mould | Whimsical Sweet Deco | Resin Craft Supplies (46mm x 62mm)","public_title":null,"options":["Default Title"],"price":399,"weight":69,"compare_at_price":499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_7b76eab1-d9ec-4b38-82f0-b9d930bf060d.jpg?v=1532696605"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_7b76eab1-d9ec-4b38-82f0-b9d930bf060d.jpg?v=1532696605","options":["Title"],"media":[{"alt":"DEFECT Cotton Candy Shaker Mold | Kawaii Resin Shaker Charm Mould | Whimsical Sweet Deco | Resin Craft Supplies (46mm x 62mm) - MiniatureSweet","id":2590106943623,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_7b76eab1-d9ec-4b38-82f0-b9d930bf060d.jpg?v=1532696605"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/031_7b76eab1-d9ec-4b38-82f0-b9d930bf060d.jpg?v=1532696605","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in cotton candy shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.6cm (W) x 6.2cm (L) \/ 1.81\" (W) x 2.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Cute crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
$1.99 USD
$1.59 USD
{"id":9756720705,"title":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm)","handle":"crown-silicone-mold-epoxy-resin-flexible-mould-decoden-cabochon-mold-kawaii-embellishment-making","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 2.3cm (L) \/ 1.34\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:28:19-11:00","vendor":"MiniatureSweet","type":"Crown Mold","tags":["cabochon mold","clear mold","crown mold","crown with heart","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","king","princess","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":36000801985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1130","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm)","public_title":null,"options":["Default Title"],"price":159,"weight":18,"compare_at_price":199,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835","options":["Title"],"media":[{"alt":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm) - MiniatureSweet","id":327846330417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 2.3cm (L) \/ 1.34\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in the shape of Erlenmeyer flask. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds,...
$2.99 USD
$2.29 USD
{"id":9941030337,"title":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm)","handle":"erlenmeyer-flask-shaker-charm-mold-epoxy-resin-craft-supplies-kawaii-bezel-mould-for-liquid-waterfall-charm-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of Erlenmeyer flask. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*This is a defective item, the cap used to seal the shaker is a bigger than it has to be, you need to sand it down for it to fit\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3cm (W) x 6.6cm (L) \/ 1.69\" (W) x 2.6\" (L)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-07-24T22:36:44-11:00","created_at":"2017-07-25T01:44:02-11:00","vendor":"MiniatureSweet","type":"Other Mold, Shaker Mold","tags":["bezel mold","biology","cabochon mold","cell phone decoration","chemistry","conical flask","decoden supplies","epoxy resin","Erlenmeyer Flask","flask mold","flexible mold","hollow mold","kawaii crafts","kawaii mold","laboratory flask","liquid charm","liquid shaker","phone case deco","resin art","resin crafts","resin mold","Resin Mould","resin piece","science","shaker charm","shaker mold","Silicone Mold","soft mold","titration flask","UV resin","waterfall charm"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":36769419905,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2098","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm)","public_title":null,"options":["Default Title"],"price":229,"weight":62,"compare_at_price":299,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098.jpg?v=1549751047","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098-02.jpg?v=1549751048","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_2d86f4f3-cd99-49e4-8896-c75e990381ca.jpg?v=1549751048","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d2a1bf0e-1fa1-4a7f-91ac-25a0a56a2472.jpg?v=1549751049","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_965376a9-28a5-41d5-8292-52bde97ad79c.jpg?v=1549751049","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_550fef64-ac8f-4836-8aa6-052220f0f09c.jpg?v=1549751050","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_fc21636e-6b88-4ee2-8185-13e5df00033c.jpg?v=1549751050","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_29652265-ee67-4d06-8496-36447d23c923.jpg?v=1549751051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_552413e6-203a-41da-ae0f-547c222d8142.jpg?v=1549751051"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098.jpg?v=1549751047","options":["Title"],"media":[{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133154865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098.jpg?v=1549751047"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098.jpg?v=1549751047","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133122097,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098-02.jpg?v=1549751048"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2098-02.jpg?v=1549751048","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133384241,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_2d86f4f3-cd99-49e4-8896-c75e990381ca.jpg?v=1549751048"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_2d86f4f3-cd99-49e4-8896-c75e990381ca.jpg?v=1549751048","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133351473,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d2a1bf0e-1fa1-4a7f-91ac-25a0a56a2472.jpg?v=1549751049"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d2a1bf0e-1fa1-4a7f-91ac-25a0a56a2472.jpg?v=1549751049","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133318705,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_965376a9-28a5-41d5-8292-52bde97ad79c.jpg?v=1549751049"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_965376a9-28a5-41d5-8292-52bde97ad79c.jpg?v=1549751049","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133285937,"position":6,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_550fef64-ac8f-4836-8aa6-052220f0f09c.jpg?v=1549751050"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_550fef64-ac8f-4836-8aa6-052220f0f09c.jpg?v=1549751050","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133253169,"position":7,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_fc21636e-6b88-4ee2-8185-13e5df00033c.jpg?v=1549751050"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_fc21636e-6b88-4ee2-8185-13e5df00033c.jpg?v=1549751050","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133220401,"position":8,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_29652265-ee67-4d06-8496-36447d23c923.jpg?v=1549751051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_29652265-ee67-4d06-8496-36447d23c923.jpg?v=1549751051","width":600},{"alt":"DEFECT Erlenmeyer Flask Shaker Charm Mold | Epoxy Resin Craft Supplies | Kawaii Bezel Mould for Liquid Waterfall Charm Making (43mm x 66mm) - MiniatureSweet","id":364133187633,"position":9,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_552413e6-203a-41da-ae0f-547c222d8142.jpg?v=1549751051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_552413e6-203a-41da-ae0f-547c222d8142.jpg?v=1549751051","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of Erlenmeyer flask. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*This is a defective item, the cap used to seal the shaker is a bigger than it has to be, you need to sand it down for it to fit\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3cm (W) x 6.6cm (L) \/ 1.69\" (W) x 2.6\" (L)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}
6 cavity heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent...
Sold Out
{"id":8700754241,"title":"DEFECT Flexible Heart Mold (6 Cavity) | Epoxy Resin Cabochon Making | Soap Mold | Food Safe Silicone Mold | Valentine's Day Decor | Wedding Party Supplies (72mm x 70mm)","handle":"flexible-heart-mold-6-cavity-epoxy-resin-cabochon-making-soap-mold-food-safe-silicone-mold-valentines-day-decor-wedding-party-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*This is a defective item, some of the hearts are dis-shaped, it is ok if you use it to make thin hearts, but not thick ones*\u003c\/p\u003e\n\u003cp\u003e**Note that the mold may NOT be in yellow color as shown in the picture**\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7.2cm (W) x 7cm (L) x 3.2cm (Depth) \/ 2.83\" (W) x 2.76\" (L) x 1.26\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T02:28:51-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["cabochon making","Cabochon Mold","decoden cabochon","Epoxy Resin Cabochon","Flexible Mold","food safe mold","Heart Cabochon","heart mold","Kawaii Charm","party decor","silicone mold","Soap Mold","valentine's day","Wedding Party"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":699,"compare_at_price_min":699,"compare_at_price_max":699,"compare_at_price_varies":false,"variants":[{"id":29641377345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3006","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Flexible Heart Mold (6 Cavity) | Epoxy Resin Cabochon Making | Soap Mold | Food Safe Silicone Mold | Valentine's Day Decor | Wedding Party Supplies (72mm x 70mm)","public_title":null,"options":["Default Title"],"price":399,"weight":205,"compare_at_price":699,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006.jpg?v=1517666893","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006-02.jpg?v=1517666893"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006.jpg?v=1517666893","options":["Title"],"media":[{"alt":"DEFECT Flexible Heart Mold (6 Cavity) | Epoxy Resin Cabochon Making | Soap Mold | Food Safe Silicone Mold | Valentine's Day Decor | Wedding Party Supplies (72mm x 70mm) - MiniatureSweet","id":228061872177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006.jpg?v=1517666893"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006.jpg?v=1517666893","width":600},{"alt":"DEFECT Flexible Heart Mold (6 Cavity) | Epoxy Resin Cabochon Making | Soap Mold | Food Safe Silicone Mold | Valentine's Day Decor | Wedding Party Supplies (72mm x 70mm) - MiniatureSweet","id":228061937713,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006-02.jpg?v=1517666893"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3006-02.jpg?v=1517666893","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*This is a defective item, some of the hearts are dis-shaped, it is ok if you use it to make thin hearts, but not thick ones*\u003c\/p\u003e\n\u003cp\u003e**Note that the mold may NOT be in yellow color as shown in the picture**\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7.2cm (W) x 7cm (L) x 3.2cm (Depth) \/ 2.83\" (W) x 2.76\" (L) x 1.26\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
10 cavity heart and flower mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the...
Sold Out
{"id":8668607489,"title":"DEFECT Heart \u0026 Flower Silicone Mould (10 Cavity) | Food Safe Chocolate Mould | Kawaii Resin Cabochon Mold | Embellishment Mold | Mini Soap Mold | Wax Mould","handle":"heart-flower-silicone-mould-10-cavity-food-safe-chocolate-mould-kawaii-resin-cabochon-mold-embellishment-mold-mini-soap-mold-wax-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e10 cavity heart and flower mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that there is a defective item\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e-Heart: approx. 3.6cm (W) x 3.1cm (L) x 2cm (Depth) \/ 1.42\" (W) x 1.22\" (L) x 0.78\" (Depth)\u003c\/p\u003e\n\u003cp\u003e-Flower: approx. 3.1cm (W) x 3cm (L) x 1.8cm (Depth) \/ 1.22\" (W) x 1.18\" (L) x 0.73\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-14T23:47:00-11:00","created_at":"2017-01-15T22:16:54-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Heart Mold, Mold Mix","tags":["Cabochon Mold","Chocolate Mould","Embellishment Mold","floral mold","flower mold","food safe mold","heart mold","kawaii crafts","Mini Soap Mold","resin mold","silicone mould","valentine's day","wax mould"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":599,"compare_at_price_min":599,"compare_at_price_max":599,"compare_at_price_varies":false,"variants":[{"id":29445380609,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2012","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Heart \u0026 Flower Silicone Mould (10 Cavity) | Food Safe Chocolate Mould | Kawaii Resin Cabochon Mold | Embellishment Mold | Mini Soap Mold | Wax Mould","public_title":null,"options":["Default Title"],"price":399,"weight":87,"compare_at_price":599,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012.jpg?v=1537276057","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012-02.jpg?v=1537276057"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012.jpg?v=1537276057","options":["Title"],"media":[{"alt":"DEFECT Heart \u0026 Flower Silicone Mould (10 Cavity) | Food Safe Chocolate Mould | Kawaii Resin Cabochon Mold | Embellishment Mold | Mini Soap Mold | Wax Mould - MiniatureSweet","id":223047548977,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012.jpg?v=1537276057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012.jpg?v=1537276057","width":600},{"alt":"DEFECT Heart \u0026 Flower Silicone Mould (10 Cavity) | Food Safe Chocolate Mould | Kawaii Resin Cabochon Mold | Embellishment Mold | Mini Soap Mold | Wax Mould - MiniatureSweet","id":223047581745,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012-02.jpg?v=1537276057"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2012-02.jpg?v=1537276057","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e10 cavity heart and flower mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that there is a defective item\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e-Heart: approx. 3.6cm (W) x 3.1cm (L) x 2cm (Depth) \/ 1.42\" (W) x 1.22\" (L) x 0.78\" (Depth)\u003c\/p\u003e\n\u003cp\u003e-Flower: approx. 3.1cm (W) x 3cm (L) x 1.8cm (Depth) \/ 1.22\" (W) x 1.18\" (L) x 0.73\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in ice cream shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter,...
Sold Out
{"id":143436283905,"title":"DEFECT Ice Cream Resin Shaker Mold | Kawaii Shaker Charm Making | Waterfall Shaker DIY | Bezel Mold | Resin Art Supplies (46mm x 75mm)","handle":"ice-cream-resin-shaker-mold-kawaii-shaker-charm-making-waterfall-shaker-diy-bezel-mold-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in ice cream shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.6cm (W) x 7.5cm (L) \/ 1.81\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-01-19T03:25:19-11:00","created_at":"2018-01-19T02:19:56-11:00","vendor":"MiniatureSweet","type":"Ice Cream Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","decoden supplies","dessert","epoxy resin","flexible mold","food","hollow mold","ice cream mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","soft mold","sweet mold","sweets deco","UV resin","waterfall charm"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":499,"compare_at_price_min":499,"compare_at_price_max":499,"compare_at_price_varies":false,"variants":[{"id":794044956673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2151","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Ice Cream Resin Shaker Mold | Kawaii Shaker Charm Making | Waterfall Shaker DIY | Bezel Mold | Resin Art Supplies (46mm x 75mm)","public_title":null,"options":["Default Title"],"price":399,"weight":73,"compare_at_price":499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2151.jpg?v=1517672809"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2151.jpg?v=1517672809","options":["Title"],"media":[{"alt":"DEFECT Ice Cream Resin Shaker Mold | Kawaii Shaker Charm Making | Waterfall Shaker DIY | Bezel Mold | Resin Art Supplies (46mm x 75mm) - MiniatureSweet","id":2463952732295,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2151.jpg?v=1517672809"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2151.jpg?v=1517672809","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in ice cream shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.6cm (W) x 7.5cm (L) \/ 1.81\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon...
$1.99 USD
$0.99 USD
{"id":6124109398169,"title":"DEFECT Kawaii Cloud Silicone Mold (2 Cavity) | Cute Stud Earrings Mould | Resin Jewelry DIY | Resin Craft Supplies (13mm x 10mm)","handle":"kawaii-cloud-silicone-mold-cute-stud-earrings-mould-resin-jewelry-diy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, some of them have marks.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 1cm (L) \/ 0.51\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-01-31T17:11:15-11:00","created_at":"2021-01-31T15:05:50-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","cloud face","cloud mold","embellishment mold","epoxy resin","flexible mold","kawaii cloud","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker bit","shaker bits","Silicone Mold","small mold","soft mold","stud earring","Stud Earrings","weather"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":37969612963993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD125B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Kawaii Cloud Silicone Mold (2 Cavity) | Cute Stud Earrings Mould | Resin Jewelry DIY | Resin Craft Supplies (13mm x 10mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":199,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/023_4922723d-b6af-4259-aa42-8de316793f92.jpg?v=1622218578"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/023_4922723d-b6af-4259-aa42-8de316793f92.jpg?v=1622218578","options":["Title"],"media":[{"alt":"DEFECT Kawaii Cloud Silicone Mold (2 Cavity) | Cute Stud Earrings Mould | Resin Jewelry DIY | Resin Craft Supplies (13mm x 10mm) - MiniatureSweet","id":17481293889689,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/023_4922723d-b6af-4259-aa42-8de316793f92.jpg?v=1622218578"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/023_4922723d-b6af-4259-aa42-8de316793f92.jpg?v=1622218578","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, some of them have marks.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 1cm (L) \/ 0.51\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Very big heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent...
Sold Out
{"id":8704774721,"title":"DEFECT Large Heart Flexible Mold | Valentine's Day Supplies | Big Heart Chocolate Mold | Silicone Baking Mould | Epoxy Resin Cabochon Mold | Soap Mold (100mm x 100mm)","handle":"defect-large-heart-flexible-mold-valentines-day-supplies-big-heart-chocolate-mold-silicone-baking-mould-epoxy-resin-cabochon-mold-soap-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eVery big heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that it may NOT be red color as shown in the picture*\u003c\/p\u003e\n\u003cp\u003e**Note that this is a defective item, the surface is not smooth, so we reduced the price to US$2.49 (original price US$3.99)**\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10cm (W) x 10cm (L) x 3cm (Depth) \/ 3.94\" (W) x 3.94\" (L) x 1.18\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T19:04:18-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["Baking Mould","Big Heart","Cabochon Mold","Chocolate Mold","Epoxy Resin Mold","flexible mold","Giant Heart","heart chocolate","Heart Mold","Huge Heart","Large Heart","silicone mold","soap mold","valentine's day","wedding supplies"],"price":249,"price_min":249,"price_max":249,"available":false,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":29670886401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3009","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Large Heart Flexible Mold | Valentine's Day Supplies | Big Heart Chocolate Mold | Silicone Baking Mould | Epoxy Resin Cabochon Mold | Soap Mold (100mm x 100mm)","public_title":null,"options":["Default Title"],"price":249,"weight":35,"compare_at_price":399,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009.jpg?v=1517666906","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009-02.jpg?v=1517666906"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009.jpg?v=1517666906","options":["Title"],"media":[{"alt":"DEFECT Large Heart Flexible Mold | Valentine's Day Supplies | Big Heart Chocolate Mold | Silicone Baking Mould | Epoxy Resin Cabochon Mold | Soap Mold (100mm x 100mm) - MiniatureSweet","id":228351115313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009.jpg?v=1517666906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009.jpg?v=1517666906","width":600},{"alt":"DEFECT Large Heart Flexible Mold | Valentine's Day Supplies | Big Heart Chocolate Mold | Silicone Baking Mould | Epoxy Resin Cabochon Mold | Soap Mold (100mm x 100mm) - MiniatureSweet","id":228351148081,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009-02.jpg?v=1517666906"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3009-02.jpg?v=1517666906","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eVery big heart mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that it may NOT be red color as shown in the picture*\u003c\/p\u003e\n\u003cp\u003e**Note that this is a defective item, the surface is not smooth, so we reduced the price to US$2.49 (original price US$3.99)**\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10cm (W) x 10cm (L) x 3cm (Depth) \/ 3.94\" (W) x 3.94\" (L) x 1.18\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in mermaid tail shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter,...
Sold Out
{"id":143449325569,"title":"DEFECT Mermaid Tail Resin Shaker Silicone Mold | Waterfall Shaker Charm Mold | Liquid Shaker DIY | Kawaii Resin Craft Supplies (47mm x 73mm)","handle":"mermaid-tail-resin-shaker-silicone-mold-waterfall-shaker-charm-mold-liquid-shaker-diy-kawaii-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in mermaid tail shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.7cm (W) x 7.3cm (L) \/ 1.85\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-01-19T03:25:19-11:00","created_at":"2018-01-19T02:30:01-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Fish Mold, Shaker Mold","tags":["beach","bezel mold","cabochon mold","cell phone decoration","decoden supplies","epoxy resin","fairy tale","fairytale","flexible mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","marine life","mermaid tail mold","nautical mold","ocean","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","sea","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":499,"compare_at_price_min":499,"compare_at_price_max":499,"compare_at_price_varies":false,"variants":[{"id":794060095489,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2152","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Mermaid Tail Resin Shaker Silicone Mold | Waterfall Shaker Charm Mold | Liquid Shaker DIY | Kawaii Resin Craft Supplies (47mm x 73mm)","public_title":null,"options":["Default Title"],"price":399,"weight":73,"compare_at_price":499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2152.jpg?v=1517672810"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2152.jpg?v=1517672810","options":["Title"],"media":[{"alt":"DEFECT Mermaid Tail Resin Shaker Silicone Mold | Waterfall Shaker Charm Mold | Liquid Shaker DIY | Kawaii Resin Craft Supplies (47mm x 73mm) - MiniatureSweet","id":2463953977479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2152.jpg?v=1517672810"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2152.jpg?v=1517672810","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in mermaid tail shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is slightly not smooth, so price is reduced to US$3.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.7cm (W) x 7.3cm (L) \/ 1.85\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
6 cavity mustache silicone molds. No releasing agent is needed, finished work can be easily pop out from the mold. *Note that this is a...
$2.99 USD
$1.99 USD
{"id":9626319489,"title":"DEFECT Mustache Silicone Molds (6 Cavity) | Moustache Flexible Mould | Geek Cabochon Mold | Kawaii Kitsch Jewelry Making (38mm x 12mm)","handle":"mustache-silicone-molds-6-cavity-moustache-flexible-mould-geek-cabochon-mold-kawaii-kitsch-jewelry-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity mustache silicone molds. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface is not smooth, but it can be solved by glazing, price is reduced from US$2.99 to US$1.99\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.8cm (W) x 1.2cm (L) \/ 1.5\" (W) x 0.48\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-06-01T02:55:05-11:00","created_at":"2017-06-01T02:28:15-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["Cabochon Mold","decoden supplies","epoxy resin","Flexible Mold","geek chic","geekery cabochon","Kawaii Craft","kitsch jewelry","Moustache mold","Movember","Mustache mold","resin art","resin crafts","resin mold","resin mould","Silicone Mold","soft mold"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":35110201409,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2059","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Mustache Silicone Molds (6 Cavity) | Moustache Flexible Mould | Geek Cabochon Mold | Kawaii Kitsch Jewelry Making (38mm x 12mm)","public_title":null,"options":["Default Title"],"price":199,"weight":42,"compare_at_price":299,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2059.jpg?v=1531910154"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2059.jpg?v=1531910154","options":["Title"],"media":[{"alt":"DEFECT Mustache Silicone Molds (6 Cavity) | Moustache Flexible Mould | Geek Cabochon Mold | Kawaii Kitsch Jewelry Making (38mm x 12mm) - MiniatureSweet","id":303829844017,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2059.jpg?v=1531910154"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2059.jpg?v=1531910154","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity mustache silicone molds. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface is not smooth, but it can be solved by glazing, price is reduced from US$2.99 to US$1.99\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.8cm (W) x 1.2cm (L) \/ 1.5\" (W) x 0.48\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
6 cavity oval mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent...
$6.99 USD
$4.99 USD
{"id":8700670337,"title":"DEFECT Oval Flexible Mold (6 Cavity) | Resin Pendant Making | Epoxy Resin Mould | Silicone Soap Mold | Food Safe Baking Mold (60mm x 77mm)","handle":"defect-oval-flexible-mold-6-cavity-oval-pendant-making-epoxy-resin-mould-silicone-soap-mold-food-safe-baking-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity oval mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this is a defective item, the surface is not smooth, so we reduced the price to US$4.99 (original price US$6.99)***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6cm (W) x 7.7cm (L) x 2.4cm (Depth) \/ 2.36\" (W) x 3.03\" (L) x 0.95\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-20T00:43:00-11:00","created_at":"2017-01-21T02:01:38-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["Baking Mold","cabochon mold","Epoxy Resin Mould","Flexible Mold","Food Safe Mold","oval cabochon","oval charm","oval mold","oval pendant","resin art","Resin Pendant","Silicone Mold","soap mold"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":699,"compare_at_price_min":699,"compare_at_price_max":699,"compare_at_price_varies":false,"variants":[{"id":29640996673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Oval Flexible Mold (6 Cavity) | Resin Pendant Making | Epoxy Resin Mould | Silicone Soap Mold | Food Safe Baking Mold (60mm x 77mm)","public_title":null,"options":["Default Title"],"price":499,"weight":205,"compare_at_price":699,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005.jpg?v=1517666889","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005-02.jpg?v=1517666889"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005.jpg?v=1517666889","options":["Title"],"media":[{"alt":"DEFECT Oval Flexible Mold (6 Cavity) | Resin Pendant Making | Epoxy Resin Mould | Silicone Soap Mold | Food Safe Baking Mold (60mm x 77mm) - MiniatureSweet","id":228060725297,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005.jpg?v=1517666889"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005.jpg?v=1517666889","width":600},{"alt":"DEFECT Oval Flexible Mold (6 Cavity) | Resin Pendant Making | Epoxy Resin Mould | Silicone Soap Mold | Food Safe Baking Mold (60mm x 77mm) - MiniatureSweet","id":228060758065,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005-02.jpg?v=1517666889"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD3005-02.jpg?v=1517666889","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e6 cavity oval mold made with food safe silicone. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for candy \/ chocolate, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this is a defective item, the surface is not smooth, so we reduced the price to US$4.99 (original price US$6.99)***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6cm (W) x 7.7cm (L) x 2.4cm (Depth) \/ 2.36\" (W) x 3.03\" (L) x 0.95\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Playing card suit silicone mold in 2 sizes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin...
Sold Out
{"id":792144937009,"title":"DEFECT Playing Card Suit Soft Mold (8 Cavity) | Poker Suits Silicone Mold | Alice in Wonderland Mold | UV Resin Art | Epoxy Resin Mould","handle":"defect-playing-card-suit-soft-mold-8-cavity-poker-suits-silicone-mold-alice-in-wonderland-mold-uv-resin-art-epoxy-resin-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePlaying card suit silicone mold in 2 sizes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of this mold is not smooth, you can fix it by pouring an extra layer of resin*\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eSpade (big): approx. 1.7cm (W) x 2.2cm (L) \/ 0.67\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003eSpade (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHeart (big)\u003cspan\u003e: approx. 1.6cm (W) x 1.9cm (L) \/ 0.63\" (W) x 0.75\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHeart (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.1cm (L) \/ 0.35\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiamond (big)\u003cspan\u003e: approx. 1.5cm (W) x 2.1cm (L) \/ 0.59\" (W) x 0.83\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiamond (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClub (big)\u003cspan\u003e: approx. 2cm (W) x 2cm (L) \/ 0.79\" (W) x 0.79\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClub (small)\u003cspan\u003e: approx. 1.1cm (W) x 1.1cm (L) \/ 0.43\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T22:54:09-11:00","created_at":"2018-07-03T21:43:35-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["Alice in Wonderland","cabochon mold","card suits","casino","Clear Mold","club suit","decoden mold","Diamond Suit","epoxy resin","flexible mold","Heart Suit","kawaii mold","playing card","poker","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold","Spade Suit","suit mold","uv resin"],"price":249,"price_min":249,"price_max":249,"available":false,"price_varies":false,"compare_at_price":349,"compare_at_price_min":349,"compare_at_price_max":349,"compare_at_price_varies":false,"variants":[{"id":8935137902641,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1202","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Playing Card Suit Soft Mold (8 Cavity) | Poker Suits Silicone Mold | Alice in Wonderland Mold | UV Resin Art | Epoxy Resin Mould","public_title":null,"options":["Default Title"],"price":249,"weight":15,"compare_at_price":349,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/012_71c664dc-1cea-4fbb-bcc9-02baac4b4895.jpg?v=1530695565"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/012_71c664dc-1cea-4fbb-bcc9-02baac4b4895.jpg?v=1530695565","options":["Title"],"media":[{"alt":"DEFECT Playing Card Suit Soft Mold (8 Cavity) | Poker Suits Silicone Mold | Alice in Wonderland Mold | UV Resin Art | Epoxy Resin Mould - MiniatureSweet","id":2596229152903,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/012_71c664dc-1cea-4fbb-bcc9-02baac4b4895.jpg?v=1530695565"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/012_71c664dc-1cea-4fbb-bcc9-02baac4b4895.jpg?v=1530695565","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePlaying card suit silicone mold in 2 sizes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of this mold is not smooth, you can fix it by pouring an extra layer of resin*\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eSpade (big): approx. 1.7cm (W) x 2.2cm (L) \/ 0.67\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003eSpade (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHeart (big)\u003cspan\u003e: approx. 1.6cm (W) x 1.9cm (L) \/ 0.63\" (W) x 0.75\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHeart (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.1cm (L) \/ 0.35\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiamond (big)\u003cspan\u003e: approx. 1.5cm (W) x 2.1cm (L) \/ 0.59\" (W) x 0.83\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDiamond (small)\u003cspan\u003e: approx. 0.9cm (W) x 1.2cm (L) \/ 0.35\" (W) x 0.47\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClub (big)\u003cspan\u003e: approx. 2cm (W) x 2cm (L) \/ 0.79\" (W) x 0.79\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClub (small)\u003cspan\u003e: approx. 1.1cm (W) x 1.1cm (L) \/ 0.43\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in tag shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti,...
Sold Out
{"id":143126593537,"title":"DEFECT Resin Shaker Charm Mold in Tag Shape | Waterfall Cabochon Making | Liquid Shaker DIY | Bezel Mould | Kawaii Resin Craft Supplies (43mm x 75mm)","handle":"resin-shaker-charm-mold-in-tag-shape-waterfall-cabochon-making-liquid-shaker-diy-bezel-mould-kawaii-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in tag shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is not smooth, so price is reduced to US$2.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.3cm (W) x 7.5cm (L) \/ 1.69\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-01-19T03:25:19-11:00","created_at":"2018-01-18T21:41:39-11:00","vendor":"MiniatureSweet","type":"Other Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","decoden supplies","epoxy resin","flexible mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","shop tag","Silicone Mold","soft mold","tag mold","UV resin","waterfall charm"],"price":299,"price_min":299,"price_max":299,"available":false,"price_varies":false,"compare_at_price":499,"compare_at_price_min":499,"compare_at_price_max":499,"compare_at_price_varies":false,"variants":[{"id":792829853697,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2150","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Resin Shaker Charm Mold in Tag Shape | Waterfall Cabochon Making | Liquid Shaker DIY | Bezel Mould | Kawaii Resin Craft Supplies (43mm x 75mm)","public_title":null,"options":["Default Title"],"price":299,"weight":73,"compare_at_price":499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2150.jpg?v=1517672807"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2150.jpg?v=1517672807","options":["Title"],"media":[{"alt":"DEFECT Resin Shaker Charm Mold in Tag Shape | Waterfall Cabochon Making | Liquid Shaker DIY | Bezel Mould | Kawaii Resin Craft Supplies (43mm x 75mm) - MiniatureSweet","id":2463883067527,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2150.jpg?v=1517672807"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2150.jpg?v=1517672807","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in tag shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of the mold is not smooth, so price is reduced to US$2.99*\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.3cm (W) x 7.5cm (L) \/ 1.69\" (W) x 2.95\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Cute seashell and star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin,...
$1.99 USD
$1.59 USD
{"id":9756596993,"title":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies","handle":"seashell-and-star-silicone-mold-2-cavity-magical-mermaid-cabochon-making-epoxy-resin-mould-soft-mold-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute seashell and star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell: approx. 2.4cm (W) x 2.4cm (L) \/ 0.94\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm (W) x 1.9cm (L) \/ 0.75\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:01:04-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Star Mold, Mold Mix","tags":["beach","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","magical girl","mermaid","ocean","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea","sea shell mold","seashell mold","Silicone Mold","star mold","UV resin"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":36000452993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1128","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies","public_title":null,"options":["Default Title"],"price":159,"weight":16,"compare_at_price":199,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832","options":["Title"],"media":[{"alt":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies - MiniatureSweet","id":327795605553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute seashell and star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell: approx. 2.4cm (W) x 2.4cm (L) \/ 0.94\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm (W) x 1.9cm (L) \/ 0.75\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Pendant tag silicone mold in various shapes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon...
Sold Out
{"id":792142413873,"title":"DEFECT Tea Bag Tag Mold | Square Rectangular Bar Round Charm Silicone Mould (4 Cavity) | UV Resin Jewellery Making | Soft Clear Mold","handle":"tea-bag-tag-mold-square-rectangular-bar-round-charm-silicone-mould-4-cavity-uv-resin-jewellery-making-soft-clear-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePendant tag silicone mold in various shapes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of this mold is not smooth, you can fix it by pouring an extra layer of resin*\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eRectangular bar: approx. 1.2cm (W) x 3.7cm (L) \/ 0.47\" (W) x 1.46\" (L)\u003c\/p\u003e\n\u003cp\u003eRound: \u003cspan\u003eapprox. 1.8cm (Dia) \/ 0.71\" (Dia)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSquare: \u003cspan\u003eapprox. 1.8cm (W) \/ 0.71\" (Dia)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTea Bag: \u003cspan\u003eapprox. 2.4cm (W) x 3.6cm (L) \/ 0.94\" (W) x 1.42\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T22:54:09-11:00","created_at":"2018-07-03T21:22:44-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","charm mold","Circle Mold","Clear Mold","decoden mold","epoxy resin","flexible mold","kawaii mold","pendant mold","rectangle bar","rectangle mold","rectangular bar","resin art","resin craft","resin crafts","resin mold","resin mould","round mold","silicone mold","soft mold","Square Mold","Tag Mold","tea bag tag","teabag tag","uv resin"],"price":249,"price_min":249,"price_max":249,"available":false,"price_varies":false,"compare_at_price":349,"compare_at_price_min":349,"compare_at_price_max":349,"compare_at_price_varies":false,"variants":[{"id":8935085015089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1201","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DEFECT Tea Bag Tag Mold | Square Rectangular Bar Round Charm Silicone Mould (4 Cavity) | UV Resin Jewellery Making | Soft Clear Mold","public_title":null,"options":["Default Title"],"price":249,"weight":15,"compare_at_price":349,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_42c5a19b-027a-4be3-ac32-cf549eac8421.jpg?v=1530695566"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_42c5a19b-027a-4be3-ac32-cf549eac8421.jpg?v=1530695566","options":["Title"],"media":[{"alt":"DEFECT Tea Bag Tag Mold | Square Rectangular Bar Round Charm Silicone Mould (4 Cavity) | UV Resin Jewellery Making | Soft Clear Mold - MiniatureSweet","id":2596228300935,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_42c5a19b-027a-4be3-ac32-cf549eac8421.jpg?v=1530695566"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_42c5a19b-027a-4be3-ac32-cf549eac8421.jpg?v=1530695566","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003ePendant tag silicone mold in various shapes. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*Note that this is a defective item, the surface of this mold is not smooth, you can fix it by pouring an extra layer of resin*\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eRectangular bar: approx. 1.2cm (W) x 3.7cm (L) \/ 0.47\" (W) x 1.46\" (L)\u003c\/p\u003e\n\u003cp\u003eRound: \u003cspan\u003eapprox. 1.8cm (Dia) \/ 0.71\" (Dia)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSquare: \u003cspan\u003eapprox. 1.8cm (W) \/ 0.71\" (Dia)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTea Bag: \u003cspan\u003eapprox. 2.4cm (W) x 3.6cm (L) \/ 0.94\" (W) x 1.42\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Devil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$2.99 USD
{"id":4464996876423,"title":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm)","handle":"demon-eye-with-cat-ears-silicone-mold-animal-devil-mold-gothic-evil-jewelry-diy-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.2m (W) x 5.1cm (L) x 1.9cm (D) \/ 1.65\" (W) x 2\" (L) x 0.73\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-01-07T19:26:06-11:00","created_at":"2020-01-04T23:04:41-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["animal devil","cabochon mold","Clear Mold","creepy","dark wizard","decoden supplies","demon eye mold","devil eye mold","embellishment mold","epoxy resin","evil eye mold","eye with cat ear","eye with cat ears","eye with horn","eye with horns","fairy tale","fairytale","flexible mold","goth","gothic","halloween","resin art","resin craft","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","uv resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31758032273543,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD289A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm)","public_title":null,"options":["Default Title"],"price":299,"weight":24,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-04.jpg?v=1578292107","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-03.jpg?v=1578292108","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039_a3a33b25-f328-4a47-9ffc-520cbff58bc8.jpg?v=1578292109","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-02_f7f98b66-96ef-47bb-b739-9620ef40e0d7.jpg?v=1578292110"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-04.jpg?v=1578292107","options":["Title"],"media":[{"alt":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm) - MiniatureSweet","id":6099603226759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-04.jpg?v=1578292107"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-04.jpg?v=1578292107","width":600},{"alt":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm) - MiniatureSweet","id":6099603193991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-03.jpg?v=1578292108"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-03.jpg?v=1578292108","width":600},{"alt":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm) - MiniatureSweet","id":6099603259527,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039_a3a33b25-f328-4a47-9ffc-520cbff58bc8.jpg?v=1578292109"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039_a3a33b25-f328-4a47-9ffc-520cbff58bc8.jpg?v=1578292109","width":600},{"alt":"Demon Eye with Cat Ears Silicone Mold | Animal Devil Mold | Gothic Evil Jewelry DIY | Resin Art Supplies (42mm x 51mm) - MiniatureSweet","id":6099603161223,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-02_f7f98b66-96ef-47bb-b739-9620ef40e0d7.jpg?v=1578292110"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/039-02_f7f98b66-96ef-47bb-b739-9620ef40e0d7.jpg?v=1578292110","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.2m (W) x 5.1cm (L) x 1.9cm (D) \/ 1.65\" (W) x 2\" (L) x 0.73\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Devil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$2.29 USD
{"id":4464794534023,"title":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm)","handle":"demon-eye-with-horn-silicone-mold-devil-eye-cabochon-mold-gothic-evil-eye-jewellery-diy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.8m (W) x 6.1cm (L) \/ 2.68\" (W) x 2.4\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-01-07T19:26:05-11:00","created_at":"2020-01-04T21:30:07-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","Clear Mold","creepy","dark wizard","decoden supplies","demon eye mold","devil eye mold","embellishment mold","epoxy resin","evil eye mold","eye with horn","eye with horns","fairy tale","fairytale","flexible mold","goth","gothic","halloween","resin art","resin craft","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","uv resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31756887097479,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3034A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm)","public_title":null,"options":["Default Title"],"price":229,"weight":17,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-03.jpg?v=1578292110","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-04.jpg?v=1578292111","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-05.jpg?v=1578292111","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_9ebea37e-c74c-4a18-8baa-b4c8edef71c1.jpg?v=1578292112","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_a753bdb4-63a1-47f2-877a-dacf2bea5725.jpg?v=1578292112"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-03.jpg?v=1578292110","options":["Title"],"media":[{"alt":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm) - MiniatureSweet","id":6098947571847,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-03.jpg?v=1578292110"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-03.jpg?v=1578292110","width":600},{"alt":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm) - MiniatureSweet","id":6098947604615,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-04.jpg?v=1578292111"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-04.jpg?v=1578292111","width":600},{"alt":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm) - MiniatureSweet","id":6098947637383,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-05.jpg?v=1578292111"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-05.jpg?v=1578292111","width":600},{"alt":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm) - MiniatureSweet","id":6098947670151,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_9ebea37e-c74c-4a18-8baa-b4c8edef71c1.jpg?v=1578292112"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030_9ebea37e-c74c-4a18-8baa-b4c8edef71c1.jpg?v=1578292112","width":600},{"alt":"Demon Eye with Horn Silicone Mold | Devil Eye Cabochon Mold | Gothic Evil Eye Jewellery DIY | Resin Craft Supplies (68mm x 61mm) - MiniatureSweet","id":6098947539079,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_a753bdb4-63a1-47f2-877a-dacf2bea5725.jpg?v=1578292112"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/030-02_a753bdb4-63a1-47f2-877a-dacf2bea5725.jpg?v=1578292112","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.8m (W) x 6.1cm (L) \/ 2.68\" (W) x 2.4\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Devil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$2.29 USD
{"id":4464743678087,"title":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm)","handle":"devil-eye-silicone-mold-demon-eye-mold-evil-eye-with-horn-mold-gothic-jewelry-diy-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5m (W) x 6.4cm (L) \/ 1.97\" (W) x 2.52\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-01-07T19:26:05-11:00","created_at":"2020-01-04T21:10:37-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","Clear Mold","creepy","dark wizard","decoden supplies","demon eye mold","devil eye mold","embellishment mold","epoxy resin","evil eye mold","eye with horn","eye with horns","fairy tale","fairytale","flexible mold","goth","gothic","halloween","resin art","resin craft","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","uv resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31756478611591,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3019B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm)","public_title":null,"options":["Default Title"],"price":229,"weight":17,"compare_at_price":null,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03_b7a33618-b767-4f04-b0fc-63568d5a6cf1.jpg?v=1578292113","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-04.jpg?v=1578292113","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-05.jpg?v=1578292114","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_542f39fa-6019-4d3a-af59-8d2febeb93f8.jpg?v=1578292114","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_3c52a083-9aad-4ada-b602-fe225c6adb7d.jpg?v=1578292115"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03_b7a33618-b767-4f04-b0fc-63568d5a6cf1.jpg?v=1578292113","options":["Title"],"media":[{"alt":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm) - MiniatureSweet","id":6098703646855,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03_b7a33618-b767-4f04-b0fc-63568d5a6cf1.jpg?v=1578292113"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03_b7a33618-b767-4f04-b0fc-63568d5a6cf1.jpg?v=1578292113","width":600},{"alt":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm) - MiniatureSweet","id":6098703679623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-04.jpg?v=1578292113"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-04.jpg?v=1578292113","width":600},{"alt":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm) - MiniatureSweet","id":6098715607175,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-05.jpg?v=1578292114"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-05.jpg?v=1578292114","width":600},{"alt":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm) - MiniatureSweet","id":6098703712391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_542f39fa-6019-4d3a-af59-8d2febeb93f8.jpg?v=1578292114"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_542f39fa-6019-4d3a-af59-8d2febeb93f8.jpg?v=1578292114","width":600},{"alt":"Devil Eye Silicone Mold | Demon Eye Mold | Evil Eye with Horn Mold | Gothic Jewelry DIY | Resin Art Supplies (50mm x 64mm) - MiniatureSweet","id":6098703614087,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_3c52a083-9aad-4ada-b602-fe225c6adb7d.jpg?v=1578292115"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_3c52a083-9aad-4ada-b602-fe225c6adb7d.jpg?v=1578292115","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5m (W) x 6.4cm (L) \/ 1.97\" (W) x 2.52\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Devil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$2.99 USD
{"id":4464955064455,"title":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY","handle":"devil-eye-with-wing-silicone-mold-demon-eye-with-wings-mold-evil-eye-mold-gothic-resin-cabochon-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5m (W) x 4.1cm (L) x 1.6cm (D) \/ 2.2\" (W) x 1.61\" (L) x 0.62\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-01-07T19:26:06-11:00","created_at":"2020-01-04T22:42:46-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","Clear Mold","creepy","dark wizard","decoden supplies","demon eye mold","devil eye mold","embellishment mold","epoxy resin","evil eye mold","eye with horn","eye with horns","eye with wing","eye with wings","fairy tale","fairytale","flexible mold","goth","gothic","halloween","resin art","resin craft","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","uv resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31757829668999,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD263A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY","public_title":null,"options":["Default Title"],"price":299,"weight":16,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-04_bf1568b2-cef0-42d3-bbfc-b69657a2d7ae.jpg?v=1578292115","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-03_7fa4541e-35f6-4cd2-8207-4d47fa9c5356.jpg?v=1578292116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038_b7807c88-cd95-4a6e-adc0-be0a6e6cf15b.jpg?v=1578292116","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-02_d0680787-f5f1-4ac2-96c9-d352deed314c.jpg?v=1578292117"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-04_bf1568b2-cef0-42d3-bbfc-b69657a2d7ae.jpg?v=1578292115","options":["Title"],"media":[{"alt":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY - MiniatureSweet","id":6099492831367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-04_bf1568b2-cef0-42d3-bbfc-b69657a2d7ae.jpg?v=1578292115"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-04_bf1568b2-cef0-42d3-bbfc-b69657a2d7ae.jpg?v=1578292115","width":600},{"alt":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY - MiniatureSweet","id":6099492798599,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-03_7fa4541e-35f6-4cd2-8207-4d47fa9c5356.jpg?v=1578292116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-03_7fa4541e-35f6-4cd2-8207-4d47fa9c5356.jpg?v=1578292116","width":600},{"alt":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY - MiniatureSweet","id":6099492864135,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038_b7807c88-cd95-4a6e-adc0-be0a6e6cf15b.jpg?v=1578292116"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038_b7807c88-cd95-4a6e-adc0-be0a6e6cf15b.jpg?v=1578292116","width":600},{"alt":"Devil Eye with Wing Silicone Mold | Demon Eye with Wings Mold | Evil Eye Mold | Gothic Resin Cabochon DIY - MiniatureSweet","id":6099492765831,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-02_d0680787-f5f1-4ac2-96c9-d352deed314c.jpg?v=1578292117"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/038-02_d0680787-f5f1-4ac2-96c9-d352deed314c.jpg?v=1578292117","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDevil eye silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5m (W) x 4.1cm (L) x 1.6cm (D) \/ 2.2\" (W) x 1.61\" (L) x 0.62\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Small diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making,...
$1.99 USD
{"id":6124147933337,"title":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm)","handle":"diamond-silicone-mold-resin-jewellery-making-stud-earrings-mould-epoxy-resin-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) or 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-01-31T17:11:16-11:00","created_at":"2021-01-31T15:46:54-11:00","vendor":"MiniatureSweet","type":"Other Mold, Shape Mold","tags":["cabochon mold","diamond mold","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker bit","shaker bits","Silicone Mold","small mold","soft mold","stud earring","Stud Earrings"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37969799905433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD283B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm)","public_title":null,"options":["Default Title"],"price":199,"weight":5,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918","options":["Title"],"media":[{"alt":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm) - MiniatureSweet","id":17481406873753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) or 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★Measurement: approx. 2.9cm (Diameter) x 2.4cm (H)...
$1.39 USD
{"id":144320823297,"title":"Diamond Silicone Mold (3 Cavity) | Clear Soft Mold for UV Resin Crafts | Epoxy Resin Mould | Kawaii Jewelry Making (29mm x 24mm)","handle":"diamond-silicone-mold-3-cavity-clear-soft-mold-for-uv-resin-crafts-epoxy-resin-mould-kawaii-jewelry-making","description":"\u003cp\u003eDiamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.9cm (Diameter) x 2.4cm (H) \/ 1.15\" (Diameter) x 0.95\" (H)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e","published_at":"2016-06-13T16:02:00-11:00","created_at":"2018-01-19T21:00:44-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["3D diamond mold","cabochon mold","Clear Mold","epoxy resin","flexible mold","kawaii crafts","resin art","resin craft","resin mold","resin mould","rhinestone mold","silicone mold","soft mold","UV resin"],"price":139,"price_min":139,"price_max":139,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":796972679169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD013A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Silicone Mold (3 Cavity) | Clear Soft Mold for UV Resin Crafts | Epoxy Resin Mould | Kawaii Jewelry Making (29mm x 24mm)","public_title":null,"options":["Default Title"],"price":139,"weight":18,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A.jpg?v=1517672827","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A-02.jpg?v=1517672827"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A.jpg?v=1517672827","options":["Title"],"media":[{"alt":"Diamond Silicone Mold (3 Cavity) | Clear Soft Mold for UV Resin Crafts | Epoxy Resin Mould | Kawaii Jewelry Making (29mm x 24mm) - MiniatureSweet","id":2464142917767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A.jpg?v=1517672827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A.jpg?v=1517672827","width":600},{"alt":"Diamond Silicone Mold (3 Cavity) | Clear Soft Mold for UV Resin Crafts | Epoxy Resin Mould | Kawaii Jewelry Making (29mm x 24mm) - MiniatureSweet","id":2464143016071,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A-02.jpg?v=1517672827"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-MD013A-02.jpg?v=1517672827","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDiamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.9cm (Diameter) x 2.4cm (H) \/ 1.15\" (Diameter) x 0.95\" (H)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e"}
Flexible dinosaur Tyrannosaurus Rex silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin,...
Sold Out
{"id":8595570113,"title":"Dino Mold | Tyrannosaurus Rex Mold | Dinosaur Cabochon Mold | Jurassic Mold | Flexible Resin Mold | UV Resin Silicone Mould | Resin Art (49mm x 20mm)","handle":"dino-mold-tyrannosaurus-rex-mold-dinosaur-cabochon-mold-jurassic-mold-flexible-resin-mold-uv-resin-silicone-mould-resin-art","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible dinosaur Tyrannosaurus Rex silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.9cm (W) x 2cm (L) \/ 1.93\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-18T18:08:00-11:00","created_at":"2016-12-27T19:13:42-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["cabochon mold","cute mould","Deco Den","Dino Mold","Dinosaur Cabochon","Dinosaur Mold","Flexible Resin Mold","Jurassic Mold","Kawaii Resin Craft","resin art","Silicone Mould","Tyrannosaurus Rex","UV Resin Mould"],"price":149,"price_min":149,"price_max":149,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29036153217,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1017","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dino Mold | Tyrannosaurus Rex Mold | Dinosaur Cabochon Mold | Jurassic Mold | Flexible Resin Mold | UV Resin Silicone Mould | Resin Art (49mm x 20mm)","public_title":null,"options":["Default Title"],"price":149,"weight":5,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1017.jpg?v=1517666290"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1017.jpg?v=1517666290","options":["Title"],"media":[{"alt":"Dino Mold | Tyrannosaurus Rex Mold | Dinosaur Cabochon Mold | Jurassic Mold | Flexible Resin Mold | UV Resin Silicone Mould | Resin Art (49mm x 20mm) - MiniatureSweet","id":214416916529,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1017.jpg?v=1517666290"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1017.jpg?v=1517666290","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible dinosaur Tyrannosaurus Rex silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.9cm (W) x 2cm (L) \/ 1.93\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Resin Push Mold ★Measurement: Approx. 1.9cm (W)...
$4.95 USD
{"id":5530214273,"title":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166","handle":"dog-biscuit-mold-animal-cookie-mold-19mm-flexible-silicone-mold-miniature-sweets-kawaii-cellphone-deco-polymer-clay-fimo-push-mold-md166","description":"\u003cp\u003eDog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Resin Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.9cm (W) x 1.7cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:37:00-11:00","created_at":"2016-03-26T01:37:17-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal cookie mold","biscuit mold","cabochon mold","cell phone deco mold","cookie mold","dog biscuit mold","dollhouse food mold","fake mini food mold","flexible mold","Handmade","kawaii mold","kitsch jewelry mold","mini sweets mold","Polymer Clay","silicone mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943483905,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD166","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166","public_title":null,"options":["Default Title"],"price":495,"weight":10,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293526505.jpeg?v=1517631553","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293665478.jpeg?v=1517631553","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_3cb9dbae-d59b-4212-8a4f-354d621124bd.jpeg?v=1517631553","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_05ea3bd0-ebf2-4116-bde3-23932991891c.jpeg?v=1517631553","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_af0dfe83-96f6-4ce4-9311-f254dc0d7363.jpeg?v=1517631553"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293526505.jpeg?v=1517631553","options":["Title"],"media":[{"alt":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166 - MiniatureSweet","id":107458854961,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293526505.jpeg?v=1517631553"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293526505.jpeg?v=1517631553","width":600},{"alt":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166 - MiniatureSweet","id":107458887729,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293665478.jpeg?v=1517631553"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.293665478.jpeg?v=1517631553","width":600},{"alt":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166 - MiniatureSweet","id":107458920497,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_3cb9dbae-d59b-4212-8a4f-354d621124bd.jpeg?v=1517631553"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272511031_3cb9dbae-d59b-4212-8a4f-354d621124bd.jpeg?v=1517631553","width":1218},{"alt":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166 - MiniatureSweet","id":107458953265,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_05ea3bd0-ebf2-4116-bde3-23932991891c.jpeg?v=1517631553"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940295_05ea3bd0-ebf2-4116-bde3-23932991891c.jpeg?v=1517631553","width":600},{"alt":"Dog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Push Mold MD166 - MiniatureSweet","id":107458986033,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_af0dfe83-96f6-4ce4-9311-f254dc0d7363.jpeg?v=1517631553"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.195940296_af0dfe83-96f6-4ce4-9311-f254dc0d7363.jpeg?v=1517631553","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDog Biscuit Mold Animal Cookie Mold 19mm Flexible Silicone Mold Miniature Sweets Kawaii Cellphone Deco Polymer Clay Fimo Resin Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.9cm (W) x 1.7cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii shaker mold in the shape of dog butt. Perfect for shaker charm, waterfall charm making. How to use: 1. Pour resin into the mold. 2. Take...
$1.29 USD
{"id":4430366212231,"title":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm)","handle":"dog-butt-resin-shaker-charm-silicone-mold-animal-butt-mould-kawaii-jewellery-diy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of dog butt. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased separately in this listing), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.1cm (W) x 6.8cm (L) \/ 2.01\" (W) x 2.68\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-12-19T21:43:21-11:00","created_at":"2019-12-19T21:28:06-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Shaker Mold","tags":["animal butt mold","animal mold","bezel mold","cabochon mold","cell phone decoration","decoden supplies","dog butt","epoxy resin","flexible mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31483131822215,"title":"Mold","option1":"Mold","option2":null,"option3":null,"sku":"MD055B","requires_shipping":true,"taxable":true,"featured_image":{"id":13755787444359,"product_id":4430366212231,"position":1,"created_at":"2019-12-19T21:28:38-11:00","updated_at":"2019-12-21T22:55:10-11:00","alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","width":600,"height":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510","variant_ids":[31483131822215]},"available":true,"name":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - Mold","public_title":"Mold","options":["Mold"],"price":129,"weight":17,"compare_at_price":null,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918688391,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31483131854983,"title":"Clear Film (10pcs)","option1":"Clear Film (10pcs)","option2":null,"option3":null,"sku":"S628A","requires_shipping":true,"taxable":true,"featured_image":{"id":13755787313287,"product_id":4430366212231,"position":5,"created_at":"2019-12-19T21:28:38-11:00","updated_at":"2019-12-21T22:55:13-11:00","alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","width":600,"height":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-04_4d29ab21-a379-48eb-85ce-f385b0a3550a.jpg?v=1577008513","variant_ids":[31483131854983]},"available":true,"name":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - Clear Film (10pcs)","public_title":"Clear Film (10pcs)","options":["Clear Film (10pcs)"],"price":129,"weight":9,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918557319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-04_4d29ab21-a379-48eb-85ce-f385b0a3550a.jpg?v=1577008513"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-05_5f67647a-db02-4b13-86b3-928834af42be.jpg?v=1577008511","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_a9bf6519-a815-47a5-b932-c02f9982007e.jpg?v=1577008512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_c5ecd798-877b-4743-8875-aa9137b6ce2f.jpg?v=1577008512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-04_4d29ab21-a379-48eb-85ce-f385b0a3550a.jpg?v=1577008513"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510","options":["Product"],"media":[{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918688391,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_39dceae7-366b-4b4b-a5ba-62bef475f10c.jpg?v=1577008510","width":600},{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918622855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-05_5f67647a-db02-4b13-86b3-928834af42be.jpg?v=1577008511"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-05_5f67647a-db02-4b13-86b3-928834af42be.jpg?v=1577008511","width":600},{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918459015,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_a9bf6519-a815-47a5-b932-c02f9982007e.jpg?v=1577008512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_a9bf6519-a815-47a5-b932-c02f9982007e.jpg?v=1577008512","width":600},{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918491783,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_c5ecd798-877b-4743-8875-aa9137b6ce2f.jpg?v=1577008512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_c5ecd798-877b-4743-8875-aa9137b6ce2f.jpg?v=1577008512","width":600},{"alt":"Dog Butt Resin Shaker Charm Silicone Mold | Animal Butt Mould | Kawaii Jewellery DIY | Resin Craft Supplies (51mm x 68mm) - MiniatureSweet","id":5931918557319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-04_4d29ab21-a379-48eb-85ce-f385b0a3550a.jpg?v=1577008513"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-04_4d29ab21-a379-48eb-85ce-f385b0a3550a.jpg?v=1577008513","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of dog butt. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased separately in this listing), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.1cm (W) x 6.8cm (L) \/ 2.01\" (W) x 2.68\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
★Measurement: Approx. 1.8cm (W) x 1.2cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530310977,"title":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765","handle":"dog-head-18mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-epoxy-casting-resin-wax-gum-paste-fondant-md765","description":"\u003cp\u003e★Measurement: Approx. 1.8cm (W) x 1.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:01:00-11:00","created_at":"2016-03-26T02:01:58-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","beads mold","cabochon mold","cell phone deco mold","cute mold","deco mold","decoden mold","earrings mold","embellishment","Handmade","kawaii mold","pet mold","Scrapbooking","sculpey mold","Supplies","topper mold"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943834689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD765","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765","public_title":null,"options":["Default Title"],"price":425,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238848454.jpeg?v=1517631609","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865901.jpeg?v=1517631609","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865061.jpeg?v=1517631609","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865063.jpeg?v=1517631609"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238848454.jpeg?v=1517631609","options":["Title"],"media":[{"alt":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765 - MiniatureSweet","id":107546214449,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238848454.jpeg?v=1517631609"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238848454.jpeg?v=1517631609","width":600},{"alt":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765 - MiniatureSweet","id":107546247217,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865901.jpeg?v=1517631609"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865901.jpeg?v=1517631609","width":600},{"alt":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765 - MiniatureSweet","id":107546279985,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865061.jpeg?v=1517631609"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865061.jpeg?v=1517631609","width":600},{"alt":"Dog Head (18mm) Silicone Flexible Push Mold Jewelry Charms Cupcake (Clay, Fimo, Premo, Epoxy, Casting Resin, Wax, Gum Paste, Fondant) MD765 - MiniatureSweet","id":107546312753,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865063.jpeg?v=1517631609"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238865063.jpeg?v=1517631609","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.8cm (W) x 1.2cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Fancy round and square doily silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry,...
Sold Out
{"id":792150278193,"title":"Doily Soft Mold (2 Cavity) | Round Doiley Silicone Mold | Square Resin Doilies Making | Clear Mould for UV Resin | Epoxy Resin Mold","handle":"doily-soft-mold-2-cavity-round-doiley-silicone-mold-square-resin-doilies-making-clear-mould-for-uv-resin-epoxy-resin-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFancy round and square doily silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eRound: approx. 4.6cm or 1.81\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eSquare: approx. 4.4cm or 1.73\" (Diameter)\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-07-03T22:54:09-11:00","created_at":"2018-07-03T22:13:49-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","doiley mold","doily mold","epoxy resin","fancy doilies","flexible mold","kawaii mold","resin art","resin craft","resin crafts","resin mold","resin mould","round doily","silicone mold","soft mold","square doily","uv resin"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8935205994545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1204","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Doily Soft Mold (2 Cavity) | Round Doiley Silicone Mold | Square Resin Doilies Making | Clear Mould for UV Resin | Epoxy Resin Mold","public_title":null,"options":["Default Title"],"price":399,"weight":24,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/014_171b7d0f-6e0f-475a-b99b-e6c16e2b0512.jpg?v=1530775149"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/014_171b7d0f-6e0f-475a-b99b-e6c16e2b0512.jpg?v=1530775149","options":["Title"],"media":[{"alt":"Doily Soft Mold (2 Cavity) | Round Doiley Silicone Mold | Square Resin Doilies Making | Clear Mould for UV Resin | Epoxy Resin Mold - MiniatureSweet","id":2596230234247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/014_171b7d0f-6e0f-475a-b99b-e6c16e2b0512.jpg?v=1530775149"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/014_171b7d0f-6e0f-475a-b99b-e6c16e2b0512.jpg?v=1530775149","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFancy round and square doily silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003eRound: approx. 4.6cm or 1.81\" (Diameter)\u003c\/p\u003e\n\u003cp\u003eSquare: approx. 4.4cm or 1.73\" (Diameter)\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use this mold with clay, do note that different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted miniature baguette silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: approx. 9mm to 25mm (L)...
$3.99 USD
{"id":5498844151961,"title":"Dollhouse Baguette Silicone Mold (5 Cavity) | Miniature French Bread Mould | Mini Doll Food Making | Kawaii Jewelry DIY (9mm to 25mm)","handle":"dollhouse-baguette-silicone-mold-miniature-french-bread-mould-mini-doll-food-making-kawaii-jewelry-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature baguette silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm to 25mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-15T20:08:43-11:00","created_at":"2020-08-10T19:58:01-11:00","vendor":"MiniatureSweet","type":"Bread Mold, Mold Mix","tags":["assorted mold","assortment","Baguette mold","bread mold","cabochon mold","Decoden Supplies","doll food","dollhouse food","dollhouse sweets","epoxy resin","fake food","faux food","flexible mold","french bread mold","French loaf","french stick","kawaii crafts","mini food","miniature dessert","miniature sweet","resin art","resin craft","Silicone Mold","silicone mould","sweet deco","tiny food","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35538759549081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD270A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Baguette Silicone Mold (5 Cavity) | Miniature French Bread Mould | Mini Doll Food Making | Kawaii Jewelry DIY (9mm to 25mm)","public_title":null,"options":["Default Title"],"price":399,"weight":16,"compare_at_price":null,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_584bc998-bd9d-4829-8392-8dada92e844b.jpg?v=1597171895","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-03_863cbaea-fbf1-4c92-b2f7-f332203b93a1.jpg?v=1597171896","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_a9406495-f6d1-4aff-9b39-a1b0a6ddcabb.jpg?v=1597171896"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_584bc998-bd9d-4829-8392-8dada92e844b.jpg?v=1597171895","options":["Title"],"media":[{"alt":"Dollhouse Baguette Silicone Mold (5 Cavity) | Miniature French Bread Mould | Mini Doll Food Making | Kawaii Jewelry DIY (9mm to 25mm) - MiniatureSweet","id":10586989166745,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_584bc998-bd9d-4829-8392-8dada92e844b.jpg?v=1597171895"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_584bc998-bd9d-4829-8392-8dada92e844b.jpg?v=1597171895","width":600},{"alt":"Dollhouse Baguette Silicone Mold (5 Cavity) | Miniature French Bread Mould | Mini Doll Food Making | Kawaii Jewelry DIY (9mm to 25mm) - MiniatureSweet","id":10586989133977,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-03_863cbaea-fbf1-4c92-b2f7-f332203b93a1.jpg?v=1597171896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-03_863cbaea-fbf1-4c92-b2f7-f332203b93a1.jpg?v=1597171896","width":600},{"alt":"Dollhouse Baguette Silicone Mold (5 Cavity) | Miniature French Bread Mould | Mini Doll Food Making | Kawaii Jewelry DIY (9mm to 25mm) - MiniatureSweet","id":10586989101209,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_a9406495-f6d1-4aff-9b39-a1b0a6ddcabb.jpg?v=1597171896"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_a9406495-f6d1-4aff-9b39-a1b0a6ddcabb.jpg?v=1597171896","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature baguette silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm to 25mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted miniature biscuit silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...
$3.99 USD
{"id":10354382529,"title":"Dollhouse Biscuit Assortment Silicone Mold (7 Cavity) | Miniature Food Mold | Fake Sweet Deco | Kawaii Mold for Clay | UV Resin Mould (4mm to 20mm)","handle":"dollhouse-biscuit-assortment-silicone-mold-7-cavity-miniature-food-mold-fake-sweet-deco-kawaii-mold-for-clay-uv-resin-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature biscuit silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4mm, 6mm, 7mm, 9mm, 13mm, 16mm \u0026amp; 20mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T18:19:23-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold, Mold Mix","tags":["biscuit mold","cabochon mold","Clear Mold","cookie mold","decoden mold","doll food crafts","dollhouse biscuit","epoxy resin","fake food mold","faux food mold","flexible mold","kawaii mold","Mini Food Craft","Miniature Biscuit","rectangle biscuit","rectangular biscuit","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38700324673,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2001A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Biscuit Assortment Silicone Mold (7 Cavity) | Miniature Food Mold | Fake Sweet Deco | Kawaii Mold for Clay | UV Resin Mould (4mm to 20mm)","public_title":null,"options":["Default Title"],"price":399,"weight":11,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2001A.jpg?v=1517671540"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2001A.jpg?v=1517671540","options":["Title"],"media":[{"alt":"Dollhouse Biscuit Assortment Silicone Mold (7 Cavity) | Miniature Food Mold | Fake Sweet Deco | Kawaii Mold for Clay | UV Resin Mould (4mm to 20mm) - MiniatureSweet","id":423464566833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2001A.jpg?v=1517671540"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2001A.jpg?v=1517671540","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature biscuit silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4mm, 6mm, 7mm, 9mm, 13mm, 16mm \u0026amp; 20mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Dollhouse miniature butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature crafts, doll...
$1.29 USD
{"id":4377282412679,"title":"Dollhouse Butter Cookie Silicone Mold (4 Cavity) | Miniature Danish Biscuit Mold | Fake Food DIY | Kawaii Sweets Deco (9mm to 24mm)","handle":"dollhouse-butter-cookie-silicone-mold-miniature-danish-biscuit-mold-fake-food-diy-kawaii-sweets-deco","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDollhouse miniature butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature crafts, doll food making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm x 7mm, 11mm x 9mm, 18mm x 15mm, 24mm x 19mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-11-26T02:14:14-11:00","created_at":"2019-11-24T19:06:18-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold, Mold Mix","tags":["bakery","biscuit mold","Brysselkex","Butter cookies","cabochon mold","cookie mold","Danish biscuits","decoden","doll food","dollhouse biscuit","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","mini food","miniature cookie","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","sweet deco","sweets deco","UV resin"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31272417099911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD515A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Butter Cookie Silicone Mold (4 Cavity) | Miniature Danish Biscuit Mold | Fake Food DIY | Kawaii Sweets Deco (9mm to 24mm)","public_title":null,"options":["Default Title"],"price":129,"weight":13,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_c572f136-4e71-45d4-85aa-cfa96d3c0726.jpg?v=1574825874"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_c572f136-4e71-45d4-85aa-cfa96d3c0726.jpg?v=1574825874","options":["Title"],"media":[{"alt":"Dollhouse Butter Cookie Silicone Mold (4 Cavity) | Miniature Danish Biscuit Mold | Fake Food DIY | Kawaii Sweets Deco (9mm to 24mm) - MiniatureSweet","id":5765456789639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_c572f136-4e71-45d4-85aa-cfa96d3c0726.jpg?v=1574825874"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_c572f136-4e71-45d4-85aa-cfa96d3c0726.jpg?v=1574825874","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eDollhouse miniature butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature crafts, doll food making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm x 7mm, 11mm x 9mm, 18mm x 15mm, 24mm x 19mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted miniature cream puff silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: - top: approx. 5mm...
$3.99 USD
{"id":5498704134297,"title":"Dollhouse Cream Puff Silicone Mold (8 Cavity) | Miniature Profiterole Mould | Fake Mini Food DIY | Kawaii Craft Supplies (5mm to 14mm)","handle":"dollhouse-cream-puff-silicone-mold-miniature-profiterole-mould-fake-mini-food-diy-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature cream puff silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- top: approx. 5mm to 14mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- bottom: approx. 5mm to 14mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-15T20:08:27-11:00","created_at":"2020-08-10T19:02:16-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["assorted mold","assortment","cabochon mold","chou a la creme","Cream Puff mold","Decoden Supplies","doll food","dollhouse food","dollhouse sweets","epoxy resin","fake food","faux food","flexible mold","French choux pastry ball","kawaii crafts","mini food","miniature dessert","miniature sweet","Profiterole mold","resin art","resin craft","Silicone Mold","silicone mould","sweet deco","tiny food","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35538037637273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD215A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Cream Puff Silicone Mold (8 Cavity) | Miniature Profiterole Mould | Fake Mini Food DIY | Kawaii Craft Supplies (5mm to 14mm)","public_title":null,"options":["Default Title"],"price":399,"weight":15,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_73a6d5fc-9614-4f3b-a380-491bfb331639.jpg?v=1597171891","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_2f28cfe4-a4ab-4884-9544-b4d3f54c9db9.jpg?v=1597171891","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_5958ac12-bd68-4e45-ac35-0908286db087.jpg?v=1597171892"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_73a6d5fc-9614-4f3b-a380-491bfb331639.jpg?v=1597171891","options":["Title"],"media":[{"alt":"Dollhouse Cream Puff Silicone Mold (8 Cavity) | Miniature Profiterole Mould | Fake Mini Food DIY | Kawaii Craft Supplies (5mm to 14mm) - MiniatureSweet","id":10586256605337,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_73a6d5fc-9614-4f3b-a380-491bfb331639.jpg?v=1597171891"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_73a6d5fc-9614-4f3b-a380-491bfb331639.jpg?v=1597171891","width":600},{"alt":"Dollhouse Cream Puff Silicone Mold (8 Cavity) | Miniature Profiterole Mould | Fake Mini Food DIY | Kawaii Craft Supplies (5mm to 14mm) - MiniatureSweet","id":10586256572569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_2f28cfe4-a4ab-4884-9544-b4d3f54c9db9.jpg?v=1597171891"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_2f28cfe4-a4ab-4884-9544-b4d3f54c9db9.jpg?v=1597171891","width":600},{"alt":"Dollhouse Cream Puff Silicone Mold (8 Cavity) | Miniature Profiterole Mould | Fake Mini Food DIY | Kawaii Craft Supplies (5mm to 14mm) - MiniatureSweet","id":10586256539801,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_5958ac12-bd68-4e45-ac35-0908286db087.jpg?v=1597171892"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_5958ac12-bd68-4e45-ac35-0908286db087.jpg?v=1597171892","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature cream puff silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- top: approx. 5mm to 14mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- bottom: approx. 5mm to 14mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted miniature croissant silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: approx. 6mm to 15mm (W)...
$3.99 USD
{"id":5498917617817,"title":"Dollhouse Croissant Silicone Mold (7 Cavity) | Miniature Pastry Mould | Faux Food Jewellery DIY | Kawaii Craft Supplies (6mm to 15mm)","handle":"dollhouse-croissant-silicone-mold-miniature-pastry-mould-faux-food-jewellery-diy-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature croissant silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm to 15mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-15T20:08:55-11:00","created_at":"2020-08-10T20:31:09-11:00","vendor":"MiniatureSweet","type":"Bread Mold, Mold Mix","tags":["assorted mold","assortment","bread mold","cabochon mold","croissant mold","Decoden Supplies","doll food","dollhouse food","dollhouse sweets","epoxy resin","fake food","faux food","flexible mold","kawaii crafts","mini food","miniature dessert","miniature sweet","pastry mold","resin art","resin craft","Silicone Mold","silicone mould","sweet deco","tiny food","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35539144638617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD341B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Croissant Silicone Mold (7 Cavity) | Miniature Pastry Mould | Faux Food Jewellery DIY | Kawaii Craft Supplies (6mm to 15mm)","public_title":null,"options":["Default Title"],"price":399,"weight":15,"compare_at_price":null,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_6ffb791c-8b0d-4ba5-9a6c-a0be9f07e407.jpg?v=1597171898","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-03_2ca670d1-dca8-4838-b515-577f4be670b1.jpg?v=1597171899","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_39d3f426-d85b-4208-90d4-21736b45e09b.jpg?v=1597171899"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_6ffb791c-8b0d-4ba5-9a6c-a0be9f07e407.jpg?v=1597171898","options":["Title"],"media":[{"alt":"Dollhouse Croissant Silicone Mold (7 Cavity) | Miniature Pastry Mould | Faux Food Jewellery DIY | Kawaii Craft Supplies (6mm to 15mm) - MiniatureSweet","id":10587398242457,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_6ffb791c-8b0d-4ba5-9a6c-a0be9f07e407.jpg?v=1597171898"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_6ffb791c-8b0d-4ba5-9a6c-a0be9f07e407.jpg?v=1597171898","width":600},{"alt":"Dollhouse Croissant Silicone Mold (7 Cavity) | Miniature Pastry Mould | Faux Food Jewellery DIY | Kawaii Craft Supplies (6mm to 15mm) - MiniatureSweet","id":10587398209689,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-03_2ca670d1-dca8-4838-b515-577f4be670b1.jpg?v=1597171899"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-03_2ca670d1-dca8-4838-b515-577f4be670b1.jpg?v=1597171899","width":600},{"alt":"Dollhouse Croissant Silicone Mold (7 Cavity) | Miniature Pastry Mould | Faux Food Jewellery DIY | Kawaii Craft Supplies (6mm to 15mm) - MiniatureSweet","id":10587398176921,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_39d3f426-d85b-4208-90d4-21736b45e09b.jpg?v=1597171899"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_39d3f426-d85b-4208-90d4-21736b45e09b.jpg?v=1597171899","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature croissant silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm to 15mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Dollhouse miniature Danish butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature...
$1.29 USD
{"id":10121068161,"title":"Dollhouse Danish Butter Cookie Silicone Mold (5 Cavity) | Miniature Food Craft | Doll Food Making | Kawaii Clay Mould | Resin Mold (6mm to 9mm)","handle":"dollhouse-danish-butter-cookie-silicone-mold-5-cavity-miniature-food-craft-doll-food-making-kawaii-clay-mould-resin-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eDollhouse miniature Danish butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature crafts, doll food making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm to 9mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If the clay you use is very soft \/ sticky, the clay may not be pop out easily, in this case, you can put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop it out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-14T23:47:00-11:00","created_at":"2017-09-05T15:13:11-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold, Mold Mix","tags":["biscuit mold","butter cookie","cabochon mold","clay mold","Clear Mold","cookie mold","danish cookie","Doll Food","dollhouse cookies","epoxy resin","fimo mold","Flexible Mold","kawaii mold","mini food","Miniature Cookie","polymer clay mold","resin mold","resin mould","silicone mold","soft mold","sweet mold","sweets deco","UV resin"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37701903745,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1141","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Danish Butter Cookie Silicone Mold (5 Cavity) | Miniature Food Craft | Doll Food Making | Kawaii Clay Mould | Resin Mold (6mm to 9mm)","public_title":null,"options":["Default Title"],"price":129,"weight":5,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1141.jpg?v=1517671033"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1141.jpg?v=1517671033","options":["Title"],"media":[{"alt":"Dollhouse Danish Butter Cookie Silicone Mold (5 Cavity) | Miniature Food Craft | Doll Food Making | Kawaii Clay Mould | Resin Mold (6mm to 9mm) - MiniatureSweet","id":396612370481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1141.jpg?v=1517671033"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1141.jpg?v=1517671033","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eDollhouse miniature Danish butter cookie silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for miniature crafts, doll food making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm to 9mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If the clay you use is very soft \/ sticky, the clay may not be pop out easily, in this case, you can put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop it out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted miniature heart macaron and whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: -...
$3.99 USD
{"id":5498028359833,"title":"Dollhouse Heart Macaron and Whipped Cream Silicone Mold (6 Cavity) | Miniature Sweet DIY | Mini Dessert Jewelry Making (5mm to 18mm)","handle":"dollhouse-heart-macaron-and-whipped-cream-silicone-mold-miniature-sweet-diy-mini-dessert-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature heart macaron and whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- heart macaron: approx. 12mm, 15mm and 18mm (W)\u003c\/p\u003e\n\u003cp\u003e- whipped cream: approx. 5mm, 7mm and 8mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-15T20:08:01-11:00","created_at":"2020-08-10T14:57:15-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["assorted mold","assortment","cabochon mold","Decoden Supplies","doll food","dollhouse food","dollhouse sweets","epoxy resin","fake food","faux food","flexible mold","French Macaroon","frosting","heart macaron","icing","kawaii crafts","macaron mold","mini food","miniature dessert","miniature sweet","resin art","resin craft","Silicone Mold","silicone mould","sweet deco","tiny food","uv resin","whip cream mold","whipped cream mold"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35534585561241,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD142A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Heart Macaron and Whipped Cream Silicone Mold (6 Cavity) | Miniature Sweet DIY | Mini Dessert Jewelry Making (5mm to 18mm)","public_title":null,"options":["Default Title"],"price":399,"weight":16,"compare_at_price":null,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_188ab553-1955-49ae-b8ff-b50d8c321440.jpg?v=1597171884","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_cdc50cf7-28b7-44cc-ba7c-3c6f02ee7641.jpg?v=1597171885","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_b3a6067c-ace9-4051-bf24-755f3415566a.jpg?v=1597171886"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_188ab553-1955-49ae-b8ff-b50d8c321440.jpg?v=1597171884","options":["Title"],"media":[{"alt":"Dollhouse Heart Macaron and Whipped Cream Silicone Mold (6 Cavity) | Miniature Sweet DIY | Mini Dessert Jewelry Making (5mm to 18mm) - MiniatureSweet","id":10583296671897,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_188ab553-1955-49ae-b8ff-b50d8c321440.jpg?v=1597171884"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_188ab553-1955-49ae-b8ff-b50d8c321440.jpg?v=1597171884","width":600},{"alt":"Dollhouse Heart Macaron and Whipped Cream Silicone Mold (6 Cavity) | Miniature Sweet DIY | Mini Dessert Jewelry Making (5mm to 18mm) - MiniatureSweet","id":10583296639129,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_cdc50cf7-28b7-44cc-ba7c-3c6f02ee7641.jpg?v=1597171885"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_cdc50cf7-28b7-44cc-ba7c-3c6f02ee7641.jpg?v=1597171885","width":600},{"alt":"Dollhouse Heart Macaron and Whipped Cream Silicone Mold (6 Cavity) | Miniature Sweet DIY | Mini Dessert Jewelry Making (5mm to 18mm) - MiniatureSweet","id":10583296606361,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_b3a6067c-ace9-4051-bf24-755f3415566a.jpg?v=1597171886"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_b3a6067c-ace9-4051-bf24-755f3415566a.jpg?v=1597171886","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature heart macaron and whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- heart macaron: approx. 12mm, 15mm and 18mm (W)\u003c\/p\u003e\n\u003cp\u003e- whipped cream: approx. 5mm, 7mm and 8mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted miniature macaron & whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for...
$3.99 USD
{"id":10354170113,"title":"Dollhouse Macaron \u0026 Whip Cream Silicone Mold (6 Cavity) | Miniature French Patisserie Mold | Whipped Cream Mold | Mini Food Craft","handle":"dollhouse-macaron-whip-cream-silicone-mold-6-cavity-miniature-french-patisserie-mold-whipped-cream-mold-mini-food-craft","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature macaron \u0026amp; whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Macaron: approx. 11mm, 16mm and 18mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Whip Cream: approx. 6mm, 7mm and 9mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T17:45:24-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Whipped Cream Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","doll food crafts","dollhouse macaron","epoxy resin","fake food mold","faux food mold","flexible mold","French Patisserie","kawaii mold","macaron mold","Mini Food Craft","Miniature Bakery","miniature macaron","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin","whip cream mold","whipped cream mold"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38698119169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD095A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Macaron \u0026 Whip Cream Silicone Mold (6 Cavity) | Miniature French Patisserie Mold | Whipped Cream Mold | Mini Food Craft","public_title":null,"options":["Default Title"],"price":399,"weight":14,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD095A.jpg?v=1517671537"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD095A.jpg?v=1517671537","options":["Title"],"media":[{"alt":"Dollhouse Macaron \u0026 Whip Cream Silicone Mold (6 Cavity) | Miniature French Patisserie Mold | Whipped Cream Mold | Mini Food Craft - MiniatureSweet","id":423435862065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD095A.jpg?v=1517671537"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD095A.jpg?v=1517671537","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature macaron \u0026amp; whipped cream silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Macaron: approx. 11mm, 16mm and 18mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Whip Cream: approx. 6mm, 7mm and 9mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted miniature French cruller donut silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: approx. 5mm to 13mm...
$3.99 USD
{"id":5498619822233,"title":"Dollhouse Miniature French Cruller Donut Silicone Mold (7 Cavity) | Mini Doughnut Mould | Fake Sweet Jewellery Making (5mm to 13mm)","handle":"dollhouse-miniature-french-cruller-donut-silicone-mold-mini-doughnut-mould-fake-sweet-jewellery-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature French cruller donut silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5mm to 13mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-15T20:08:15-11:00","created_at":"2020-08-10T18:14:18-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["assorted mold","assortment","cabochon mold","Decoden Supplies","doll food","dollhouse food","dollhouse sweets","donut mold","Doughnut mold","epoxy resin","fake food","faux food","flexible mold","french cruller mold","kawaii crafts","mini food","miniature dessert","miniature sweet","resin art","resin craft","Silicone Mold","silicone mould","sweet deco","tiny food","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35537422024857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD123B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Miniature French Cruller Donut Silicone Mold (7 Cavity) | Mini Doughnut Mould | Fake Sweet Jewellery Making (5mm to 13mm)","public_title":null,"options":["Default Title"],"price":399,"weight":14,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_8fd486dd-2b3b-427f-917d-5b3f0fa6e315.jpg?v=1597171888","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-03_35dec769-2d05-4d3b-9868-d5499423dc02.jpg?v=1597171888","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_65f7fdfb-b4d2-4c92-b7d3-33fdd76cf9a7.jpg?v=1597171888"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_8fd486dd-2b3b-427f-917d-5b3f0fa6e315.jpg?v=1597171888","options":["Title"],"media":[{"alt":"Dollhouse Miniature French Cruller Donut Silicone Mold (7 Cavity) | Mini Doughnut Mould | Fake Sweet Jewellery Making (5mm to 13mm) - MiniatureSweet","id":10585720619161,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_8fd486dd-2b3b-427f-917d-5b3f0fa6e315.jpg?v=1597171888"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_8fd486dd-2b3b-427f-917d-5b3f0fa6e315.jpg?v=1597171888","width":600},{"alt":"Dollhouse Miniature French Cruller Donut Silicone Mold (7 Cavity) | Mini Doughnut Mould | Fake Sweet Jewellery Making (5mm to 13mm) - MiniatureSweet","id":10585720586393,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-03_35dec769-2d05-4d3b-9868-d5499423dc02.jpg?v=1597171888"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-03_35dec769-2d05-4d3b-9868-d5499423dc02.jpg?v=1597171888","width":600},{"alt":"Dollhouse Miniature French Cruller Donut Silicone Mold (7 Cavity) | Mini Doughnut Mould | Fake Sweet Jewellery Making (5mm to 13mm) - MiniatureSweet","id":10585720553625,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_65f7fdfb-b4d2-4c92-b7d3-33fdd76cf9a7.jpg?v=1597171888"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_65f7fdfb-b4d2-4c92-b7d3-33fdd76cf9a7.jpg?v=1597171888","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted miniature French cruller donut silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5mm to 13mm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted miniature macaron silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...
$3.99 USD
{"id":10353916161,"title":"Dollhouse Miniature Macaron Assortment Silicone Mold (7 Cavity) | Fake Sweets DIY | Mini Doll Food Craft | Clear Mold for UV Resin (5mm to 12mm)","handle":"dollhouse-miniature-macaron-assortment-silicone-mold-7-cavity-fake-sweets-diy-mini-doll-food-craft-clear-mold-for-uv-resin","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature macaron silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 12mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-22T22:10:00-11:00","created_at":"2017-10-24T16:58:40-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden mold","doll food crafts","dollhouse macaron","epoxy resin","fake food mold","faux food mold","flexible mold","French Patisserie","kawaii mold","macaron mold","Mini Food Craft","Miniature Bakery","miniature macaron","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","sweet deco","sweets deco","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38696100097,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD094A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dollhouse Miniature Macaron Assortment Silicone Mold (7 Cavity) | Fake Sweets DIY | Mini Doll Food Craft | Clear Mold for UV Resin (5mm to 12mm)","public_title":null,"options":["Default Title"],"price":399,"weight":13,"compare_at_price":null,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD094A.jpg?v=1517671536"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD094A.jpg?v=1517671536","options":["Title"],"media":[{"alt":"Dollhouse Miniature Macaron Assortment Silicone Mold (7 Cavity) | Fake Sweets DIY | Mini Doll Food Craft | Clear Mold for UV Resin (5mm to 12mm) - MiniatureSweet","id":423403618353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD094A.jpg?v=1517671536"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD094A.jpg?v=1517671536","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted miniature macaron silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin crafts.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 12mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo Jewelry DIY Kawaii Cabochon Charms Push Mold ★Measurement: approx. 2.6cm (W)★...
Sold Out
{"id":5530262721,"title":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555","handle":"dollhouse-mold-round-plate-mold-26mm-flexible-silicone-mold-miniature-deco-polymer-clay-fimo-diy-kawaii-cabochon-charms-push-mold-md555","description":"\u003cp\u003eDollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo Jewelry DIY Kawaii Cabochon Charms Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W)★\u003cbr\u003e (The golden part of the sample above is made with the air-dry gold colored clay from Taiwan, you can find it at: http:\/\/www.etsy.com\/shop\/MiniatureSweet?section_id=6869088 , we have the silver color available as well, and please note that this clay is a bit sticky, so you will need to put the clay together with the mold into the fridge for 5-10 minutes for easy pop out)\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:53:00-11:00","created_at":"2016-03-26T01:53:59-11:00","vendor":"MiniatureSweet","type":"Tableware Mold","tags":["cabochon mold","cutlery mold","dollhouse plate mold","fimo mold","flexible mold","Handmade","kitchenware mold","miniature mold","polymer clay mold","premo mold","push mold","Scrapbooking","silicone mold","Supplies","tableware mold","utensils mold"],"price":545,"price_min":545,"price_max":545,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943617345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD555","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555","public_title":null,"options":["Default Title"],"price":545,"weight":14,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240458912.jpeg?v=1517631963","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240474469.jpeg?v=1517631963","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514817.jpeg?v=1517631963","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457742.jpeg?v=1517631963","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457746.jpeg?v=1517631963"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240458912.jpeg?v=1517631963","options":["Title"],"media":[{"alt":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555 - MiniatureSweet","id":107516788785,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240458912.jpeg?v=1517631963"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240458912.jpeg?v=1517631963","width":600},{"alt":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555 - MiniatureSweet","id":107516821553,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240474469.jpeg?v=1517631963"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240474469.jpeg?v=1517631963","width":600},{"alt":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555 - MiniatureSweet","id":107516854321,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514817.jpeg?v=1517631963"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514817.jpeg?v=1517631963","width":1218},{"alt":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555 - MiniatureSweet","id":107516887089,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457742.jpeg?v=1517631963"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457742.jpeg?v=1517631963","width":600},{"alt":"Dollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo DIY Kawaii Cabochon Charms Push Mold MD555 - MiniatureSweet","id":107516919857,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457746.jpeg?v=1517631963"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.240457746.jpeg?v=1517631963","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDollhouse Mold Round Plate Mold 26mm Flexible Silicone Mold Miniature Deco Polymer Clay Fimo Jewelry DIY Kawaii Cabochon Charms Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W)★\u003cbr\u003e (The golden part of the sample above is made with the air-dry gold colored clay from Taiwan, you can find it at: http:\/\/www.etsy.com\/shop\/MiniatureSweet?section_id=6869088 , we have the silver color available as well, and please note that this clay is a bit sticky, so you will need to put the clay together with the mold into the fridge for 5-10 minutes for easy pop out)\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Lovely dolphin silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
Sold Out
{"id":8746755521,"title":"Dolphin Mold | Fish Silicone Mould | Flexible Marine Life Mold | Animal Mold | Kawaii UV Resin Mold | Resin Cabochon Making | Decoden Supplies (35mm x 23mm)","handle":"dolphin-mold-fish-silicone-mould-flexible-marine-life-mold-animal-mold-kawaii-uv-resin-mold-resin-cabochon-making-decoden-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLovely dolphin silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm (W) x 2.3cm (L) \/ 1.38\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-01-28T01:32:00-11:00","created_at":"2017-01-28T01:25:07-11:00","vendor":"MiniatureSweet","type":"Fish Mold","tags":["Animal Mould","Beach Jewelry","cabochon mold","Clear Resin Mold","Dolphin Mold","epoxy resin mold","Fish Mold","Flexible Mold","Kawaii Decoden","marine life","Resin Cabochon","sea ocean","Silicone Mold","UV Resin Mould"],"price":139,"price_min":139,"price_max":139,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29985460033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1049","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Dolphin Mold | Fish Silicone Mould | Flexible Marine Life Mold | Animal Mold | Kawaii UV Resin Mold | Resin Cabochon Making | Decoden Supplies (35mm x 23mm)","public_title":null,"options":["Default Title"],"price":139,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1049.jpg?v=1517667120"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1049.jpg?v=1517667120","options":["Title"],"media":[{"alt":"Dolphin Mold | Fish Silicone Mould | Flexible Marine Life Mold | Animal Mold | Kawaii UV Resin Mold | Resin Cabochon Making | Decoden Supplies (35mm x 23mm) - MiniatureSweet","id":228954669105,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1049.jpg?v=1517667120"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1049.jpg?v=1517667120","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLovely dolphin silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm (W) x 2.3cm (L) \/ 1.38\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii dolphin flexible silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★ Measurement: approx. 4.5cm (W)...
$0.69 USD
{"id":8435603649,"title":"Dolphin Silicone Mold | Kawaii Animal Mould | Flexible Fish Mold | Clear Resin Cabochon Mold | Kawaii Decoden Crafts | UV Resin Mould | Epoxy Resin Charm DIY (45mm x 30mm)","handle":"dolphin-silicone-mold-kawaii-animal-mould-flexible-fish-mold-clear-resin-cabochon-mold-kawaii-decoden-crafts-uv-resin-mould-epoxy-resin-charm-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii dolphin flexible silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5cm (W) x 3cm (L) \/ 1.77\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2016-11-13T02:50:49-11:00","vendor":"MiniatureSweet","type":"Fish Mold","tags":["Animal Mould","cabochon mold","Clear Resin Mold","Dolphin Mold","Fish Mold","Flexible Mold","kawaii charm mould","Kawaii Decoden","Kawaii Mould","Resin Cabochon","resin charm DIY","Silicone Mold","UV Resin Mould"],"price":69,"price_min":69,"price_max":69,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28427866625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD905","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dolphin Silicone Mold | Kawaii Animal Mould | Flexible Fish Mold | Clear Resin Cabochon Mold | Kawaii Decoden Crafts | UV Resin Mould | Epoxy Resin Charm DIY (45mm x 30mm)","public_title":null,"options":["Default Title"],"price":69,"weight":7,"compare_at_price":null,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD905.jpg?v=1517664400"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD905.jpg?v=1517664400","options":["Title"],"media":[{"alt":"Dolphin Silicone Mold | Kawaii Animal Mould | Flexible Fish Mold | Clear Resin Cabochon Mold | Kawaii Decoden Crafts | UV Resin Mould | Epoxy Resin Charm DIY (45mm x 30mm) - MiniatureSweet","id":204443779121,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD905.jpg?v=1517664400"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD905.jpg?v=1517664400","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii dolphin flexible silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5cm (W) x 3cm (L) \/ 1.77\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted donut and cupcake bottom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...
$3.49 USD
{"id":2063018557489,"title":"Donut and Cupcake Bottom Silicone Mold (4 Cavity) | Assorted Doughnut Mould | Sweets Deco | Kawaii Craft Supplies","handle":"donut-and-cupcake-bottom-silicone-mold-assorted-doughnut-mould-sweets-deco-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted donut and cupcake bottom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Cupcake Bottom: approx. 3.7cm (W) x 1.9cm (H) \/ 1.46\" (W) x 0.75\" (H)\u003c\/p\u003e\n\u003cp\u003e- Donut (Top): approx. 4cm or 1.57\" (W)\u003c\/p\u003e\n\u003cp\u003e- Donut (Bottom Left): approx. 3.8cm or 1.5\" (W)\u003c\/p\u003e\n\u003cp\u003e- Donut (Bottom Right): approx. 3.9cm or 1.54\" (W)\u003c\/p\u003e\n★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/div\u003e","published_at":"2019-07-09T00:08:16-11:00","created_at":"2019-07-08T20:44:34-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["cabochon mold","clear mold","cupcake bottom","cupcake mold","dessert mold","Donut mold","epoxy resin","flexible mold","food mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","sweet mold","sweets deco","UV resin"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15853267877937,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2245","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Donut and Cupcake Bottom Silicone Mold (4 Cavity) | Assorted Doughnut Mould | Sweets Deco | Kawaii Craft Supplies","public_title":null,"options":["Default Title"],"price":349,"weight":74,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044_56aaaf7d-0ca2-411c-83e6-4c91b159da48.jpg?v=1562770203","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044-02_8be4c2d7-fd45-4e88-808f-b6f631326e6c.jpg?v=1562770204"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044_56aaaf7d-0ca2-411c-83e6-4c91b159da48.jpg?v=1562770203","options":["Title"],"media":[{"alt":"Donut and Cupcake Bottom Silicone Mold (4 Cavity) | Assorted Doughnut Mould | Sweets Deco | Kawaii Craft Supplies - MiniatureSweet","id":2830246084743,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044_56aaaf7d-0ca2-411c-83e6-4c91b159da48.jpg?v=1562770203"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044_56aaaf7d-0ca2-411c-83e6-4c91b159da48.jpg?v=1562770203","width":600},{"alt":"Donut and Cupcake Bottom Silicone Mold (4 Cavity) | Assorted Doughnut Mould | Sweets Deco | Kawaii Craft Supplies - MiniatureSweet","id":2830246051975,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044-02_8be4c2d7-fd45-4e88-808f-b6f631326e6c.jpg?v=1562770204"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/044-02_8be4c2d7-fd45-4e88-808f-b6f631326e6c.jpg?v=1562770204","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted donut and cupcake bottom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Cupcake Bottom: approx. 3.7cm (W) x 1.9cm (H) \/ 1.46\" (W) x 0.75\" (H)\u003c\/p\u003e\n\u003cp\u003e- Donut (Top): approx. 4cm or 1.57\" (W)\u003c\/p\u003e\n\u003cp\u003e- Donut (Bottom Left): approx. 3.8cm or 1.5\" (W)\u003c\/p\u003e\n\u003cp\u003e- Donut (Bottom Right): approx. 3.9cm or 1.54\" (W)\u003c\/p\u003e\n★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/div\u003e"}
Donut Doughnut Mold 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Clay Jewelry Charms Resin Cabochon ★Measurement: Approx. 2.1cm (Diameter)★ No...
Sold Out
{"id":5530221057,"title":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236","handle":"donut-mold-doughnut-21mm-silicone-flexible-mold-decoden-kawaii-miniature-mold-sweets-food-fimo-polymer-jewelry-charms-resin-cabochon-md236","description":"\u003cp\u003eDonut Doughnut Mold 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Clay Jewelry Charms Resin Cabochon\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.1cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:40:00-11:00","created_at":"2016-03-26T01:40:37-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["Cabochon","Cabochon Mold","decoden supplies","dollhouse food mold","Doughnut mold","fake food mold","fimo mold","flexible mold","food mold","Handmade","kawaii mold","miniature mold","pendant mold","polymer clay mold","silicone mold","Supplies"],"price":529,"price_min":529,"price_max":529,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943492865,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD236","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236","public_title":null,"options":["Default Title"],"price":529,"weight":13,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143701.jpeg?v=1517632151","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143702.jpeg?v=1517632151","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272544280.jpeg?v=1517632151","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143703.jpeg?v=1517632151","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143704.jpeg?v=1517632151"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143701.jpeg?v=1517632151","options":["Title"],"media":[{"alt":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236 - MiniatureSweet","id":107470422065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143701.jpeg?v=1517632151"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143701.jpeg?v=1517632151","width":600},{"alt":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236 - MiniatureSweet","id":107470454833,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143702.jpeg?v=1517632151"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143702.jpeg?v=1517632151","width":600},{"alt":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236 - MiniatureSweet","id":107470487601,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272544280.jpeg?v=1517632151"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272544280.jpeg?v=1517632151","width":1218},{"alt":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236 - MiniatureSweet","id":107470520369,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143703.jpeg?v=1517632151"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143703.jpeg?v=1517632151","width":600},{"alt":"Donut Mold Doughnut 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Jewelry Charms Resin Cabochon MD236 - MiniatureSweet","id":107470553137,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143704.jpeg?v=1517632151"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143704.jpeg?v=1517632151","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDonut Doughnut Mold 21mm Silicone Flexible Mold Decoden Kawaii Miniature Mold Sweets Food Fimo Polymer Clay Jewelry Charms Resin Cabochon\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.1cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Donut Mold Doughnut w/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon Mold ★Measurement: Approx. 1.5cm (Diameter)★ No...
$4.55 USD
{"id":5530221121,"title":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237","handle":"donut-mold-doughnut-w-sprinkles-15mm-flexible-silicone-mold-miniature-sweets-deco-fimo-polymer-clay-jewelry-charms-kawaii-cabochon-md237","description":"\u003cp\u003eDonut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.5cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:40:00-11:00","created_at":"2016-03-26T01:40:40-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["Cabochon","cabochon mold","decoden sweets","donut mold","Doughnut mold","fake food","flexible mold","Handmade","kawaii charms mold","miniature sweets","miniaturesweet","polymer clay sweets","scrapbooking mold","silicone mold","Supplies","sweets deco mold"],"price":455,"price_min":455,"price_max":455,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943492929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD237","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237","public_title":null,"options":["Default Title"],"price":455,"weight":10,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237557253.jpeg?v=1517632140","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539630.jpeg?v=1517632140","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272528109.jpeg?v=1517632140","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539542.jpeg?v=1517632140","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539544.jpeg?v=1517632140"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237557253.jpeg?v=1517632140","options":["Title"],"media":[{"alt":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237 - MiniatureSweet","id":107470585905,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237557253.jpeg?v=1517632140"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237557253.jpeg?v=1517632140","width":600},{"alt":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237 - MiniatureSweet","id":107470618673,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539630.jpeg?v=1517632140"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539630.jpeg?v=1517632140","width":600},{"alt":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237 - MiniatureSweet","id":107470651441,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272528109.jpeg?v=1517632140"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272528109.jpeg?v=1517632140","width":1218},{"alt":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237 - MiniatureSweet","id":107470684209,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539542.jpeg?v=1517632140"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539542.jpeg?v=1517632140","width":600},{"alt":"Donut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon MD237 - MiniatureSweet","id":107470716977,"position":5,"preview_image":{"aspect_ratio":1.167,"height":514,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539544.jpeg?v=1517632140"},"aspect_ratio":1.167,"height":514,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237539544.jpeg?v=1517632140","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDonut Mold Doughnut w\/ Sprinkles 15mm Flexible Silicone Mold Miniature Sweets Deco Fimo Polymer Clay Jewelry Charms Kawaii Cabochon Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 1.5cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii shaker mold in heart shape. Perfect for shaker charm, waterfall charm making. Buy the clear film to seal the shaker. Measurement: approx. 3.9cm (W) x 3.4cm (L)...
$2.99 USD
{"id":7655717994649,"title":"Double Heart Shaker Charm Silicone Mold | Kawaii Decoden Cabochon DIY | UV Resin Soft Mould | Cute Accessories Making (39mm x 34mm)","handle":"double-heart-shaker-charm-silicone-mold-kawaii-decoden-cabochon-diy-uv-resin-soft-mould-cute-accessories-making","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii shaker mold in heart shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasurement\u003c\/span\u003e: approx. 3.9cm (W) x 3.4cm (L) \/ 1.54\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Apply another layer of UV resin to seal the hole\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2023-04-30T15:14:28-11:00","created_at":"2023-04-30T14:44:42-11:00","vendor":"MiniatureSweet","type":"Shaker Mold, Heart Mold","tags":["bezel mold","cabochon mold","cell phone decoration","decoden supplies","double heart","epoxy resin","flexible mold","heart mold","heart shaker","hollow mold","kawaii crafts","kawaii kei","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","resin shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43126050750617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2024B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Double Heart Shaker Charm Silicone Mold | Kawaii Decoden Cabochon DIY | UV Resin Soft Mould | Cute Accessories Making (39mm x 34mm)","public_title":null,"options":["Default Title"],"price":299,"weight":14,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-02_b2a49605-e301-41a9-bbde-e9ba2361d7cb.jpg?v=1682905561","\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-03_10123b80-33f7-4454-8aa9-077f432014bd.jpg?v=1682905561","\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005_ffed1592-bc71-415b-86a7-188d4afed34a.jpg?v=1682905495"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-02_b2a49605-e301-41a9-bbde-e9ba2361d7cb.jpg?v=1682905561","options":["Title"],"media":[{"alt":"Double Heart Shaker Charm Silicone Mold | Kawaii Decoden Cabochon DIY | UV Resin Soft Mould | Cute Accessories Making (39mm x 34mm) - MiniatureSweet","id":29023622299801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-02_b2a49605-e301-41a9-bbde-e9ba2361d7cb.jpg?v=1682905561"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-02_b2a49605-e301-41a9-bbde-e9ba2361d7cb.jpg?v=1682905561","width":800},{"alt":"Double Heart Shaker Charm Silicone Mold | Kawaii Decoden Cabochon DIY | UV Resin Soft Mould | Cute Accessories Making (39mm x 34mm) - MiniatureSweet","id":29023622332569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-03_10123b80-33f7-4454-8aa9-077f432014bd.jpg?v=1682905561"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005-03_10123b80-33f7-4454-8aa9-077f432014bd.jpg?v=1682905561","width":800},{"alt":"Double Heart Shaker Charm Silicone Mold | Kawaii Decoden Cabochon DIY | UV Resin Soft Mould | Cute Accessories Making (39mm x 34mm) - MiniatureSweet","id":29023622365337,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005_ffed1592-bc71-415b-86a7-188d4afed34a.jpg?v=1682905495"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/005_ffed1592-bc71-415b-86a7-188d4afed34a.jpg?v=1682905495","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii shaker mold in heart shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasurement\u003c\/span\u003e: approx. 3.9cm (W) x 3.4cm (L) \/ 1.54\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Apply another layer of UV resin to seal the hole\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in star shape. Perfect for shaker charm, waterfall charm making. Buy the clear film to seal the shaker. Measurement: approx. 3.8cm (W) x 3.6cm (L)...
$2.99 USD
{"id":7655719108761,"title":"Double Star Resin Shaker Charm Silicone Mould | Kawaii UV Resin Soft Mold | Cute Decoden Cabochon Making (38mm x 36mm)","handle":"double-star-resin-shaker-charm-silicone-mould-kawaii-uv-resin-soft-mold-cute-decoden-cabochon-making","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii shaker mold in star shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasurement\u003c\/span\u003e: approx. 3.8cm (W) x 3.6cm (L) \/ 1.5\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Apply another layer of UV resin to seal the hole\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2023-04-30T15:14:29-11:00","created_at":"2023-04-30T14:56:17-11:00","vendor":"MiniatureSweet","type":"Shaker Mold, Star Mold","tags":["bezel mold","cabochon mold","cell phone decoration","decoden supplies","double star","epoxy resin","flexible mold","hollow mold","kawaii crafts","kawaii kei","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","resin shaker charm","shaker mold","Silicone Mold","soft mold","star mold","star shaker","UV resin","waterfall charm"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43126056747161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD098D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Double Star Resin Shaker Charm Silicone Mould | Kawaii UV Resin Soft Mold | Cute Decoden Cabochon Making (38mm x 36mm)","public_title":null,"options":["Default Title"],"price":299,"weight":14,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-02_4d5c506b-3f4c-4434-a1b0-9262b2fa4cfb.jpg?v=1682906189","\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-03_51d81b38-828a-43cd-87be-c53ef0ddb523.jpg?v=1682906189","\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006_b68fc614-a2a2-451c-bc9a-5f0e1affbf28.jpg?v=1682906188"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-02_4d5c506b-3f4c-4434-a1b0-9262b2fa4cfb.jpg?v=1682906189","options":["Title"],"media":[{"alt":"Double Star Resin Shaker Charm Silicone Mould | Kawaii UV Resin Soft Mold | Cute Decoden Cabochon Making (38mm x 36mm) - MiniatureSweet","id":29023636291737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-02_4d5c506b-3f4c-4434-a1b0-9262b2fa4cfb.jpg?v=1682906189"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-02_4d5c506b-3f4c-4434-a1b0-9262b2fa4cfb.jpg?v=1682906189","width":800},{"alt":"Double Star Resin Shaker Charm Silicone Mould | Kawaii UV Resin Soft Mold | Cute Decoden Cabochon Making (38mm x 36mm) - MiniatureSweet","id":29023636324505,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-03_51d81b38-828a-43cd-87be-c53ef0ddb523.jpg?v=1682906189"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006-03_51d81b38-828a-43cd-87be-c53ef0ddb523.jpg?v=1682906189","width":800},{"alt":"Double Star Resin Shaker Charm Silicone Mould | Kawaii UV Resin Soft Mold | Cute Decoden Cabochon Making (38mm x 36mm) - MiniatureSweet","id":29023636357273,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006_b68fc614-a2a2-451c-bc9a-5f0e1affbf28.jpg?v=1682906188"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/files\/006_b68fc614-a2a2-451c-bc9a-5f0e1affbf28.jpg?v=1682906188","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii shaker mold in star shape. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMeasurement\u003c\/span\u003e: approx. 3.8cm (W) x 3.6cm (L) \/ 1.5\" (W) x 1.42\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Apply another layer of UV resin to seal the hole\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}