Molds - Christmas & Religions
Jingle Bell Shaker Silicone Mold | Cute Resin Shaker...
$1.09 USD
{"id":2074979565617,"title":"Jingle Bell Shaker Silicone Mold | Cute Resin Shaker Charm Making | Kawaii Decoden Cabochon with Waterfall Effect DIY (56mm x 51mm)","handle":"jungle-bell-shaker-silicone-mold-cute-resin-shaker-charm-making-kawaii-decoden-cabochon-with-waterfall-effect-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of jingle bell. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.6cm (W) x 5.1cm (L) \/ 2.2\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-07-14T21:34:39-11:00","created_at":"2019-07-14T15:58:02-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Other Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","christmas mold","decoden supplies","epoxy resin","flexible mold","hollow mold","jingle bell mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","soft mold","UV resin","waterfall charm"],"price":109,"price_min":109,"price_max":109,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15901721198641,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2169A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Jingle Bell Shaker Silicone Mold | Cute Resin Shaker Charm Making | Kawaii Decoden Cabochon with Waterfall Effect DIY (56mm x 51mm)","public_title":null,"options":["Default Title"],"price":109,"weight":13,"compare_at_price":null,"inventory_quantity":29,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/014_71019185-be28-42f5-a754-b6ebe7e904f5.jpg?v=1563164938","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/001_e078a230-4345-46d2-b26d-e558fd37f8ba.jpg?v=1563164939","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/014-02_40aca319-d960-44b8-b63e-1601da803bbd.jpg?v=1563164939","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/002_165ccd7c-45df-4c44-a6c5-a9db607fbacc.jpg?v=1563164940","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/003_7a3eacdf-ee9b-4622-bf9f-97550e55378a.jpg?v=1563164940"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/014_71019185-be28-42f5-a754-b6ebe7e904f5.jpg?v=1563164938","options":["Title"],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of jingle bell. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.6cm (W) x 5.1cm (L) \/ 2.2\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Snowflake Assortment Silicone Mold (3 Cavity) | Chri...
$3.99 USD
{"id":1911460429873,"title":"Snowflake Assortment Silicone Mold (3 Cavity) | Christmas Charm Making | Winter Ornament DIY | UV Resin Art Supplies","handle":"snowflake-assortment-silicone-mold-christmas-charm-making-winter-ornament-diy-uv-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake ornament silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003e- approx. 3.9cm (W) x 5.1cm (L) \/ 1.54\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- approx. 4.3cm (W) x 5.5cm (L) \/ 1.69\" (W) x 2.17\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e - approx. 4.2cm (W) x 5.4cm (L) \/ 1.65\" (W) x 2.13\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T00:10:09-11:00","created_at":"2019-03-24T23:19:33-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Ornament","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14942085120049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2199","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Snowflake Assortment Silicone Mold (3 Cavity) | Christmas Charm Making | Winter Ornament DIY | UV Resin Art Supplies","public_title":null,"options":["Default Title"],"price":399,"weight":51,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/002_c5ba0ccd-6394-41b4-8f3d-a8fd14b75db7.jpg?v=1553542647","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/002-02_6b8c356a-0125-43ec-b508-928cca1e574b.jpg?v=1553542647","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/002-03_28269289-a0da-4451-a7d1-e0673785f224.jpg?v=1553542648"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/002_c5ba0ccd-6394-41b4-8f3d-a8fd14b75db7.jpg?v=1553542647","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake ornament silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003e- approx. 3.9cm (W) x 5.1cm (L) \/ 1.54\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- approx. 4.3cm (W) x 5.5cm (L) \/ 1.69\" (W) x 2.17\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e - approx. 4.2cm (W) x 5.4cm (L) \/ 1.65\" (W) x 2.13\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted Snowflake Silicone Mold (3 Cavity) | Christ...
$2.79 USD
{"id":1911451582513,"title":"Assorted Snowflake Silicone Mold (3 Cavity) | Christmas Cabochon DIY | Festive Embellishment Mold | Resin Craft Supplies","handle":"assorted-snowflake-silicone-mold-christmas-cabochon-diy-festive-embellishment-mold-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful small snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003e- approx. 1.9cm (W) x 2.1cm (L) \/ 0.75\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- approx. 2.6cm (W) x 2.9cm (L) \/ 0.75\" (W) x 0.83\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e - approx. 2.1cm (W) x 2.4cm (L) \/ 0.83\" (W) x 0.94\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T00:10:09-11:00","created_at":"2019-03-24T23:09:39-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Ornament","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":279,"price_min":279,"price_max":279,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14941828284465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2198","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Assorted Snowflake Silicone Mold (3 Cavity) | Christmas Cabochon DIY | Festive Embellishment Mold | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":279,"weight":14,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006_0ac6b546-6ac6-4a2d-a8b9-224c251cf721.jpg?v=1553542507","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006-02_c7d64247-8c61-4655-9621-497c8d084748.jpg?v=1553542508","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006-03_6dc36984-3053-4786-999a-cb094f48301a.jpg?v=1553542508"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006_0ac6b546-6ac6-4a2d-a8b9-224c251cf721.jpg?v=1553542507","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful small snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement (left to right):\u003c\/p\u003e\n\u003cp\u003e- approx. 1.9cm (W) x 2.1cm (L) \/ 0.75\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- approx. 2.6cm (W) x 2.9cm (L) \/ 0.75\" (W) x 0.83\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e - approx. 2.1cm (W) x 2.4cm (L) \/ 0.83\" (W) x 0.94\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Snowflake Ornament Silicone Mold | Soft Cl...
$3.49 USD
{"id":1911444308017,"title":"Christmas Snowflake Ornament Silicone Mold | Soft Clear Mould for UV Resin Craft | Winter Embellishment DIY (65mm x 81mm)","handle":"christmas-snowflake-ornament-silicone-mold-soft-clear-mould-for-uv-resin-craft-winter-embellishment-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.5cm (W) x 8.1cm (L) \/ 2.56\" (W) x 3.19\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T00:10:09-11:00","created_at":"2019-03-24T23:02:43-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Ornament","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14941664018481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2197","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Christmas Snowflake Ornament Silicone Mold | Soft Clear Mould for UV Resin Craft | Winter Embellishment DIY (65mm x 81mm)","public_title":null,"options":["Default Title"],"price":349,"weight":30,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/004_0ff528ea-342e-43ce-b68f-81f209590f99.jpg?v=1553542523","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/004-03_37b28fe7-91c5-4019-a7ca-8e3694975440.jpg?v=1553542523","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/004-02_57a0784d-c5e1-4f54-81e8-aab5be2acbc5.jpg?v=1553542525"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/004_0ff528ea-342e-43ce-b68f-81f209590f99.jpg?v=1553542523","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.5cm (W) x 8.1cm (L) \/ 2.56\" (W) x 3.19\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Big Snowflake Silicone Mold | Christmas Ornament Mak...
$3.49 USD
{"id":1911435657265,"title":"Big Snowflake Silicone Mold | Christmas Ornament Making | Clear Soft Mould for Resin Art (63mm x 80mm)","handle":"big-snowflake-silicone-mold-christmas-ornament-making-clear-soft-mould-for-resin-art","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.3cm (W) x 8cm (L) \/ 2.48\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T00:10:08-11:00","created_at":"2019-03-24T22:52:43-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Ornament","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14941442441265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2196","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Big Snowflake Silicone Mold | Christmas Ornament Making | Clear Soft Mould for Resin Art (63mm x 80mm)","public_title":null,"options":["Default Title"],"price":349,"weight":38,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/003_9b357cdb-a9e0-47b1-b02f-ebee2f14d8f2.jpg?v=1553542514","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/003-03_9c499758-72d0-49a9-8fd4-c5e808bf202a.jpg?v=1553542514","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/003-02_6ded68ad-4c1d-4f0c-af42-db97b8a4b18b.jpg?v=1553542515"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/003_9b357cdb-a9e0-47b1-b02f-ebee2f14d8f2.jpg?v=1553542514","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.3cm (W) x 8cm (L) \/ 2.48\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Large Snowflake Silicone Mold | Christmas Ornament D...
$3.49 USD
{"id":1911415308337,"title":"Large Snowflake Silicone Mold | Christmas Ornament DIY | Holiday Embellishment Making | Resin Art Supplies (58mm x 74mm)","handle":"large-snowflake-silicone-mold-christmas-ornament-diy-holiday-embellishment-making-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5.8cm (W) x 7.4cm (L) \/ 2.28\" (W) x 2.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-03-25T00:10:08-11:00","created_at":"2019-03-24T22:30:12-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Ornament","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14940951019569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2195","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Large Snowflake Silicone Mold | Christmas Ornament DIY | Holiday Embellishment Making | Resin Art Supplies (58mm x 74mm)","public_title":null,"options":["Default Title"],"price":349,"weight":28,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/005_8402d14d-2edf-48f9-aca3-8ae9bedcaec8.jpg?v=1553542594","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/005-03_f0e21652-bc6a-4b8e-b2b2-a3e3ee1e6c98.jpg?v=1553542595","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/005-02_41b055bd-80a7-4485-a183-d2915a512b66.jpg?v=1553542595"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/005_8402d14d-2edf-48f9-aca3-8ae9bedcaec8.jpg?v=1553542594","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 5.8cm (W) x 7.4cm (L) \/ 2.28\" (W) x 2.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Tiny Mini Silicone Mold (Set of 4) | Star Moon Snowf...
$1.29 USD
{"id":1806787018801,"title":"Tiny Mini Silicone Mold (Set of 4) | Star Moon Snowflake Clover Flexible Mold | Kawaii UV Resin Jewelry DIY | Small Stud Earring Making","handle":"tiny-mini-silicone-mold-star-moon-snowflake-clover-flexible-mold-kawaii-uv-resin-jewelry-diy-small-stud-earring-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eTiny mini silicone mold assortment in the shape of star, moon, snowflake and clover. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pcs\u003cspan\u003e (1 piece per design)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Star: \u003cspan\u003eapprox. 0.7cm (W) x 0.6cm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 0.6cm (W) x 0.7cm (L) \/ 0.24\" (W) x 0.28\" (L)\u003c\/p\u003e\n\u003cp\u003e- Snowflake: \u003cspan\u003eapprox. 0.5cm (W) x 0.6cm (L) \/ 0.2\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Clover: approx. 0.6cm (W) x 0.6cm (L) \/ 0.24\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-01-07T23:23:25-11:00","created_at":"2019-01-07T21:45:53-11:00","vendor":"MiniatureSweet","type":"Other Mold, Moon Mold, Star Mold, Christmas Mold, Mold Mix","tags":["clear mold","clover mold","earrings DIY","epoxy resin","flexible mold","jewellery mold","jewelry mold","magical girl","mahou kei","Mini Mold","moon mold","resin art","resin craft","resin jewelry","resin mold","resin mould","silicone mold","small mold","Snow Flake Mold","Snowflake Mold","soft mold","star mold","Stud Earring","tiny mold","UV resin"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14347855396913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD366A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Tiny Mini Silicone Mold (Set of 4) | Star Moon Snowflake Clover Flexible Mold | Kawaii UV Resin Jewelry DIY | Small Stud Earring Making","public_title":null,"options":["Default Title"],"price":129,"weight":4,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/031_50397bf1-9dad-42ee-aaa7-d167dd8b133a.jpg?v=1546972240"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/031_50397bf1-9dad-42ee-aaa7-d167dd8b133a.jpg?v=1546972240","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eTiny mini silicone mold assortment in the shape of star, moon, snowflake and clover. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pcs\u003cspan\u003e (1 piece per design)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Star: \u003cspan\u003eapprox. 0.7cm (W) x 0.6cm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Moon: approx. 0.6cm (W) x 0.7cm (L) \/ 0.24\" (W) x 0.28\" (L)\u003c\/p\u003e\n\u003cp\u003e- Snowflake: \u003cspan\u003eapprox. 0.5cm (W) x 0.6cm (L) \/ 0.2\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Clover: approx. 0.6cm (W) x 0.6cm (L) \/ 0.24\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Mini Snowflake Silicone Mold | Stud Earring DIY | Ch...
$0.49 USD
{"id":1806784266289,"title":"Mini Snowflake Silicone Mold | Stud Earring DIY | Christmas Jewellery Supplies | Clear Soft Mould for UV Resin | Tiny Flexible Mold (5mm x 6mm)","handle":"mini-snowflake-silicone-mold-stud-earring-diy-christmas-jewellery-supplies-clear-soft-mould-for-uv-resin-tiny-flexible-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eTiny mini snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 0.5cm (W) x 0.6cm (L) \/ 0.2\" (W) x 0.24\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-01-07T23:23:25-11:00","created_at":"2019-01-07T21:17:39-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["christmas","clear mold","earrings DIY","epoxy resin","flexible mold","jewellery mold","jewelry mold","Mini Mold","resin art","resin craft","resin jewelry","resin mold","resin mould","silicone mold","small mold","Snow Flake Mold","Snowflake Mold","soft mold","Stud Earring","tiny mold","UV resin","winter"],"price":49,"price_min":49,"price_max":49,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14347840028721,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD337A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Mini Snowflake Silicone Mold | Stud Earring DIY | Christmas Jewellery Supplies | Clear Soft Mould for UV Resin | Tiny Flexible Mold (5mm x 6mm)","public_title":null,"options":["Default Title"],"price":49,"weight":3,"compare_at_price":null,"inventory_quantity":133,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/029_9442fe43-3ce6-4739-90d9-54ffdcfbb293.jpg?v=1546972188"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/029_9442fe43-3ce6-4739-90d9-54ffdcfbb293.jpg?v=1546972188","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eTiny mini snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 0.5cm (W) x 0.6cm (L) \/ 0.2\" (W) x 0.24\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Snowflake Silicone Mold | Winter Holiday E...
$2.29 USD
{"id":1806270365745,"title":"Christmas Snowflake Silicone Mold | Winter Holiday Embellishment Making | Soft Clear Mold for UV Resin | Resin Art Supplies","handle":"christmas-snowflake-silicone-mold-winter-holiday-embellishment-making-soft-clear-mold-for-uv-resin-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.3cm (W) x 4.9cm (L) \/ 1.69\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-01-06T23:34:37-11:00","created_at":"2019-01-05T23:03:08-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Clear Mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","snow flake mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","UV Resin","winter"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14346204348465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD595A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Christmas Snowflake Silicone Mold | Winter Holiday Embellishment Making | Soft Clear Mold for UV Resin | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":229,"weight":14,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/017_b234a914-31f4-4ae2-8a40-4f73aea41e90.jpg?v=1546794557"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/017_b234a914-31f4-4ae2-8a40-4f73aea41e90.jpg?v=1546794557","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eBeautiful snowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4.3cm (W) x 4.9cm (L) \/ 1.69\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Crucifix Silicone Mold | Jesus on the Cross Mold | D...
Sold Out
{"id":1806211252273,"title":"Crucifix Silicone Mold | Jesus on the Cross Mold | Decorative Cross Flexible Mould | Epoxy Resin Art Supplies (61mm x 80mm)","handle":"crucifix-silicone-mold-jesus-on-the-cross-mold-decorative-cross-flexible-mould-epoxy-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eJesus on the cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry \/ cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.1cm (W) x 8cm (L) \/ 2.4\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-01-06T23:34:37-11:00","created_at":"2019-01-05T22:26:00-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Cross Mold","Crucifix mold","decorative cross","epoxy resin","flexible mold","Jesus on the cross","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","soft mold"],"price":459,"price_min":459,"price_max":459,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14346145955889,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD779A","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Crucifix Silicone Mold | Jesus on the Cross Mold | Decorative Cross Flexible Mould | Epoxy Resin Art Supplies (61mm x 80mm)","public_title":null,"options":["Default Title"],"price":459,"weight":31,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/038_6faca8c3-38be-47a9-b8e2-1fb49f0a2f5a.jpg?v=1546794564"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/038_6faca8c3-38be-47a9-b8e2-1fb49f0a2f5a.jpg?v=1546794564","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eJesus on the cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry \/ cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 6.1cm (W) x 8cm (L) \/ 2.4\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Small Snowflake Silicone Mold (4 Cavity) | Assorted ...
$1.99 USD
{"id":1481547939889,"title":"Small Snowflake Silicone Mold (4 Cavity) | Assorted Snow Flakes Mold | Clear Mould for UV Resin | Tiny Winter Embellishment DIY","handle":"small-snowflake-silicone-mold-assorted-snow-flakes-mold-clear-mould-for-uv-resin-tiny-winter-embellishment-diy","description":"\u003cp\u003eSet of mini snowflake silicone mold in various designs. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 8mm and 9mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2018-10-13T18:26:25-11:00","created_at":"2018-10-06T19:43:43-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["christmas mold","Clear Mold","epoxy resin","flexible mold","Kawaii Craft","mini mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","small mold","Snow Flake Mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","tiny mold","uv resin","winter festive"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13601554956337,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD660A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Small Snowflake Silicone Mold (4 Cavity) | Assorted Snow Flakes Mold | Clear Mould for UV Resin | Tiny Winter Embellishment DIY","public_title":null,"options":["Default Title"],"price":199,"weight":10,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/044_136850f0-8c20-43a4-ac64-92a89850203a.jpg?v=1538920580","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/044-02_6799ff3a-a46d-47ed-a90e-e25d45d6ab1e.jpg?v=1538920580"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/044_136850f0-8c20-43a4-ac64-92a89850203a.jpg?v=1538920580","options":["Title"],"content":"\u003cp\u003eSet of mini snowflake silicone mold in various designs. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 8mm and 9mm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}
Snowflake Silicone Mold (4 Cavity) | Clear Mold for ...
$3.99 USD
{"id":770084503601,"title":"Snowflake Silicone Mold (4 Cavity) | Clear Mold for UV Resin | Christmas Embellishment Mould | Epoxy Resin Jewelry DIY (35mm x 39mm)","handle":"snowflake-silicone-mold-clear-mold-for-uv-resin-christmas-embellishment-mould-epoxy-resin-jewelry-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSnowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003eSnowflake: approx. 3.5cm (W) x 3.9cm (L) \/ 1.38\" (W) x 1.54\" (L)\u003c\/p\u003e\n\u003cp\u003eHeart: approx. 1cm (W) x 1cm (W) \/ 0.39\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:36-11:00","created_at":"2018-05-14T17:31:30-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","christmas mold","Clear Mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","snow flake","Snow Flakes","snowflake mold","snowflakes","soft mold","UV resin","winter mold"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8698408665137,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1164","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Snowflake Silicone Mold (4 Cavity) | Clear Mold for UV Resin | Christmas Embellishment Mould | Epoxy Resin Jewelry DIY (35mm x 39mm)","public_title":null,"options":["Default Title"],"price":399,"weight":52,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/028.jpg?v=1526368585"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/028.jpg?v=1526368585","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSnowflake silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003eSnowflake: approx. 3.5cm (W) x 3.9cm (L) \/ 1.38\" (W) x 1.54\" (L)\u003c\/p\u003e\n\u003cp\u003eHeart: approx. 1cm (W) x 1cm (W) \/ 0.39\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Cross Silicone Mold | Religion Mold | Gothic Decoden...
$1.49 USD
{"id":769937113137,"title":"Cross Silicone Mold | Religion Mold | Gothic Decoden Supplies | Clear Mould for UV Resin | Epoxy Resin Mold (33mm x 48mm)","handle":"cross-silicone-mold-religion-mold-gothic-decoden-supplies-clear-mould-for-uv-resin-epoxy-resin-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.3cm (W) x 4.8cm (L) \/ 1.3\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:35-11:00","created_at":"2018-05-14T00:22:25-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism","cabochon mold","Catholic","christian","Clear Mold","Cross Mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","halloween mold","Kawaii Goth","religion","Religious mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8695219191857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1160","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Cross Silicone Mold | Religion Mold | Gothic Decoden Supplies | Clear Mould for UV Resin | Epoxy Resin Mold (33mm x 48mm)","public_title":null,"options":["Default Title"],"price":149,"weight":7,"compare_at_price":null,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/012_968a1780-657d-4fb8-a812-7da90495b0bc.jpg?v=1526368502"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/012_968a1780-657d-4fb8-a812-7da90495b0bc.jpg?v=1526368502","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.3cm (W) x 4.8cm (L) \/ 1.3\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Angel Cross Mold | Clear Silicone Mold for UV Resin ...
$1.49 USD
{"id":769617297457,"title":"Angel Cross Mold | Clear Silicone Mold for UV Resin Craft | Epoxy Resin Mould | Religion Jewelry Making (26mm x 45mm)","handle":"angel-cross-mold-clear-silicone-mold-for-uv-resin-craft-epoxy-resin-mould-religion-jewelry-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 4.5cm (L) \/ 1.02\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:35-11:00","created_at":"2018-05-12T18:51:06-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism","cabochon mold","Catholic","christian","Clear Mold","Cross Mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","halloween mold","Kawaii Goth","religion","Religious mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8691581583409,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1159","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Angel Cross Mold | Clear Silicone Mold for UV Resin Craft | Epoxy Resin Mould | Religion Jewelry Making (26mm x 45mm)","public_title":null,"options":["Default Title"],"price":149,"weight":6,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/013_8b8ec5d1-ff6d-4cf4-9703-fbfeb576d7ef.jpg?v=1526194800"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/013_8b8ec5d1-ff6d-4cf4-9703-fbfeb576d7ef.jpg?v=1526194800","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 4.5cm (L) \/ 1.02\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Cross Silicone Mold for Resin Craft | Clear Soft Mol...
$1.49 USD
{"id":769615396913,"title":"Cross Silicone Mold for Resin Craft | Clear Soft Mold for UV Resin | Religion Mold | Resin Jewelry DIY (32mm x 46mm)","handle":"cross-silicone-mold-for-resin-craft-clear-soft-mold-for-uv-resin-religion-mold-resin-jewelry-diy","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.2cm (W) x 4.6cm (L) \/ 1.26\" (W) x 1.81\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:35-11:00","created_at":"2018-05-12T18:39:41-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism","cabochon mold","Catholic","christian","Clear Mold","Cross Mold","decoden mold","embellishment mold","epoxy resin","Flexible Mold","halloween mold","Kawaii Goth","religion","Religious mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8691560906801,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1158","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Cross Silicone Mold for Resin Craft | Clear Soft Mold for UV Resin | Religion Mold | Resin Jewelry DIY (32mm x 46mm)","public_title":null,"options":["Default Title"],"price":149,"weight":7,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/014_88dab2ec-a429-4626-8b12-b2d4d7d9fde5.jpg?v=1526194816"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/014_88dab2ec-a429-4626-8b12-b2d4d7d9fde5.jpg?v=1526194816","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.2cm (W) x 4.6cm (L) \/ 1.26\" (W) x 1.81\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Catholic Cross Silicone Mold | Clear Soft Mold for U...
$2.49 USD
{"id":144564060161,"title":"Catholic Cross Silicone Mold | Clear Soft Mold for UV Resin Crafts | Christian Cabochon Mold | Epoxy Resin Mold | Decoden Supplies (40mm x 49mm)","handle":"catholic-cross-silicone-mold-clear-soft-mold-for-uv-resin-crafts-christian-cabochon-mold-epoxy-resin-mold-decoden-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4cm (W) x 4.9cm (L) \/ 1.57\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2018-01-20T02:20:17-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism Mold","cabochon mold","Catholic cross","christian cross","Clear Mold","Cross Mold","cross pendant","decoden mold","epoxy resin","Flexible Mold","Gothic Lolita","halloween mold","Kawaii Goth","latin cross","Religion Jewelry","Religious Jewellery","resin art","resin craft","resin crafts","resin mold","resin mould","roman cross","silicone mold","soft mold","UV resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":797317562369,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD568A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Catholic Cross Silicone Mold | Clear Soft Mold for UV Resin Crafts | Christian Cabochon Mold | Epoxy Resin Mold | Decoden Supplies (40mm x 49mm)","public_title":null,"options":["Default Title"],"price":249,"weight":13,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/007-MD568A.jpg?v=1517672835"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/007-MD568A.jpg?v=1517672835","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 4cm (W) x 4.9cm (L) \/ 1.57\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Latin Cross Silicone Mold | Christian Jewellery Supp...
$2.49 USD
{"id":144563929089,"title":"Latin Cross Silicone Mold | Christian Jewellery Supplies | Soft Clear Mold for UV Resin | Epoxy Resin Mould (35mm x 50mm)","handle":"latin-cross-silicone-mold-christian-jewellery-supplies-soft-clear-mold-for-uv-resin-epoxy-resin-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.5cm (W) x 5cm (L) \/ 1.38\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2018-01-20T02:08:58-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["Baptism Mold","cabochon mold","Catholic cross","christian cross","Clear Mold","Cross Mold","cross pendant","decoden mold","epoxy resin","Flexible Mold","Gothic Lolita","halloween mold","Kawaii Goth","latin cross","Religion Jewelry","Religious Jewellery","resin art","resin craft","resin crafts","resin mold","resin mould","roman cross","silicone mold","soft mold","UV resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":797317431297,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD567A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Latin Cross Silicone Mold | Christian Jewellery Supplies | Soft Clear Mold for UV Resin | Epoxy Resin Mould (35mm x 50mm)","public_title":null,"options":["Default Title"],"price":249,"weight":11,"compare_at_price":null,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006-MD567A.jpg?v=1517672833"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/006-MD567A.jpg?v=1517672833","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eCross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3.5cm (W) x 5cm (L) \/ 1.38\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Snow Globe Shaker Charm Silicone Mold | Kawaii Shake...
$3.99 USD
{"id":143482388481,"title":"Snow Globe Shaker Charm Silicone Mold | Kawaii Shaker Cabochon Making | Waterfall Resin Shaker DIY | Christmas Craft Supplies (48mm x 55mm)","handle":"snow-globe-shaker-charm-silicone-mold-kawaii-shaker-cabochon-making-waterfall-resin-shaker-diy-christmas-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in snow globe shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.8cm (W) x 5.5cm (L) \/ 1.89\" (W) x 2.17\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-01-19T03:25:19-11:00","created_at":"2018-01-19T02:54:32-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Other Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","christmas mold","decoden supplies","epoxy resin","flexible mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","snow globe mold","soft mold","UV resin","waterfall charm"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":794133856257,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2155","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Snow Globe Shaker Charm Silicone Mold | Kawaii Shaker Cabochon Making | Waterfall Resin Shaker DIY | Christmas Craft Supplies (48mm x 55mm)","public_title":null,"options":["Default Title"],"price":399,"weight":57,"compare_at_price":null,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD2155.jpg?v=1517672815"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD2155.jpg?v=1517672815","options":["Title"],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in snow globe shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Make 2 pieces of the backing part on the left and 1 piece of the frame part on the right.\u003c\/p\u003e\n\u003cp\u003e2. Glue the frame with one of the backing and add embellishments, liquid, etc.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with the other backing part.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003e- You can mix distilled water and clear glue to make the waterfall liquid, recommend to have the mixture frozen before you seal the shaker, it is less messy this way\u003c\/p\u003e\n\u003cp\u003e- Not recommended to fill up the shaker with baby oil as this shaker is too shallow\u003c\/p\u003e\n\u003cp\u003e- You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 4.8cm (W) x 5.5cm (L) \/ 1.89\" (W) x 2.17\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Snowman Soft Mold | Christmas Silicone Mould | Kawai...
$1.59 USD
{"id":123870740481,"title":"Snowman Soft Mold | Christmas Silicone Mould | Kawaii UV Resin Mold | Resin Art Supplies | Small Cabochon Mold (15mm x 27mm)","handle":"snowman-soft-mold-christmas-silicone-mould-kawaii-uv-resin-mold-resin-art-supplies-small-cabochon-mold","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible snowman silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003eYou can use it with open bezel molds: \u003ca href=\"https:\/\/goo.gl\/BhFrKn\" target=\"_blank\" title=\"Open Bezel Molds\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/BhFrKn\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.5cm (W) x 2.7cm (L) \/ 0.59\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-01-02T19:58:41-11:00","created_at":"2018-01-07T02:44:38-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["christmas mold","clear mold","embellishment mold","epoxy resin","flexible mold","open back bezel","open backed bezel","open bezel","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","small embellishment","snowman mold","soft mold","uv resin"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":685103841281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD722A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Snowman Soft Mold | Christmas Silicone Mould | Kawaii UV Resin Mold | Resin Art Supplies | Small Cabochon Mold (15mm x 27mm)","public_title":null,"options":["Default Title"],"price":159,"weight":5,"compare_at_price":null,"inventory_quantity":60,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD722A.jpg?v=1517672721"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD722A.jpg?v=1517672721","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible snowman silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003eYou can use it with open bezel molds: \u003ca href=\"https:\/\/goo.gl\/BhFrKn\" target=\"_blank\" title=\"Open Bezel Molds\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/BhFrKn\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.5cm (W) x 2.7cm (L) \/ 0.59\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Small Christmas Tree Silcone Mold | Kawaii Soft Mold...
$1.69 USD
{"id":123867987969,"title":"Small Christmas Tree Silcone Mold | Kawaii Soft Mold | UV Resin Flexible Mold | Embellishment Mould (18mm x 27mm)","handle":"small-christmas-tree-silcone-mold-kawaii-soft-mold-uv-resin-flexible-mold-embellishment-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible Christmas tree silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003eYou can use it with open bezel molds: \u003ca href=\"https:\/\/goo.gl\/BhFrKn\" target=\"_blank\" title=\"Open Bezel Molds\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/BhFrKn\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.8cm (W) x 2.7cm (L) \/ 0.71\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-01-02T19:58:41-11:00","created_at":"2018-01-07T02:37:41-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["christmas tree mold","clear mold","embellishment mold","epoxy resin","flexible mold","open back bezel","open backed bezel","open bezel","resin art","resin craft","resin crafts","resin mold","resin mould","silicone mold","small embellishment","soft mold","uv resin"],"price":169,"price_min":169,"price_max":169,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":685069533185,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD716A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Small Christmas Tree Silcone Mold | Kawaii Soft Mold | UV Resin Flexible Mold | Embellishment Mould (18mm x 27mm)","public_title":null,"options":["Default Title"],"price":169,"weight":5,"compare_at_price":null,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD716A.jpg?v=1517672719"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD716A.jpg?v=1517672719","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"ui-title-bar__title\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible Christmas tree silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry making.\u003c\/p\u003e\n\u003cp\u003eYou can use it with open bezel molds: \u003ca href=\"https:\/\/goo.gl\/BhFrKn\" target=\"_blank\" title=\"Open Bezel Molds\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/BhFrKn\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.8cm (W) x 2.7cm (L) \/ 0.71\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Gingerbread House Silicone Mold | Christmas Decorati...
$10.99 USD
{"id":10337768897,"title":"Gingerbread House Silicone Mold | Christmas Decoration | Epoxy Resin Craft Supplies | Clear Soft Mold for UV Resin","handle":"gingerbread-house-silicone-mold-christmas-decoration-epoxy-resin-craft-supplies-clear-soft-mold-for-uv-resin","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eLovely gingerbread house silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (of the mold): approx. 16cm (W) x 22cm (L) \/ 6.3\" (W) x 8.66\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Measurement (of the gingerbread house): approx. 8.5cm (W) x 11.5cm (H) x 9.2cm (Depth) \/ 3.35\" (W) x 4.53\" (H) x 3.62\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-22T01:11:59-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas Tree","Clear Mold","epoxy resin","flexible mold","gingerbread house","house mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold","UV resin"],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38650905729,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD050A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Gingerbread House Silicone Mold | Christmas Decoration | Epoxy Resin Craft Supplies | Clear Soft Mold for UV Resin","public_title":null,"options":["Default Title"],"price":1099,"weight":158,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD050A.jpg?v=1517671509","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD050A-02.jpg?v=1517671509","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD050A-03.jpg?v=1517671509","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD050A-04.jpg?v=1517671509"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD050A.jpg?v=1517671509","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eLovely gingerbread house silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (of the mold): approx. 16cm (W) x 22cm (L) \/ 6.3\" (W) x 8.66\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Measurement (of the gingerbread house): approx. 8.5cm (W) x 11.5cm (H) x 9.2cm (Depth) \/ 3.35\" (W) x 4.53\" (H) x 3.62\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Assortment Silicone Mold (13 Cavity) | San...
$9.99 USD
{"id":10337610177,"title":"Christmas Assortment Silicone Mold (13 Cavity) | Santa Claus Christmas Tree Reindeer Snowman Angel Bell Star Snowflake Present Candy Stick Mould","handle":"christmas-assortment-silicone-mold-13-cavity-santa-claus-christmas-tree-reindeer-snowman-angel-bell-star-snowflake-present-candy-stick-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Christmas silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm to 3.6cm (W) \/ 0.59\" to 1.42\" (W)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T23:07:59-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["angel","animal","bird","cabochon mold","candy stick","christmas bell","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Christmas star","Christmas Tree","Decoden mold","epoxy resin","flexible mold","Gift box","present","reindeer","resin art","resin craft","resin mold","resin mould","santa claus","silicone mold","snow flake","Snow Flakes","snowflake","snowflakes","snowman","soft mold","strawberry","winter"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38649614721,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD036A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Christmas Assortment Silicone Mold (13 Cavity) | Santa Claus Christmas Tree Reindeer Snowman Angel Bell Star Snowflake Present Candy Stick Mould","public_title":null,"options":["Default Title"],"price":999,"weight":127,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD036A.jpg?v=1517671503"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD036A.jpg?v=1517671503","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted Christmas silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm to 3.6cm (W) \/ 0.59\" to 1.42\" (W)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Assorted Snowflake Mold (13 Cavity) | Christmas Sili...
$8.99 USD
{"id":10337605057,"title":"Assorted Snowflake Mold (13 Cavity) | Christmas Silicone Mold | Winter Embellishment Mold | Food Safe Mould | Epoxy Resin Craft","handle":"assorted-snowflake-mold-13-cavity-christmas-silicone-mold-winter-embellishment-mold-food-safe-mould-epoxy-resin-craft","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSnowflake assortment silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.4cm to 3cm (Diameter) \/ 0.55\" to 1.18\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T22:44:48-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Decoden mold","epoxy resin","flexible mold","resin art","resin craft","resin mold","resin mould","silicone mold","Snow Flake Mold","Snow Flakes","Snowflake Mold","snowflakes","soft mold","winter"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38649419073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD041A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Assorted Snowflake Mold (13 Cavity) | Christmas Silicone Mold | Winter Embellishment Mold | Food Safe Mould | Epoxy Resin Craft","public_title":null,"options":["Default Title"],"price":899,"weight":68,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD041A.jpg?v=1517671501"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD041A.jpg?v=1517671501","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eSnowflake assortment silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.4cm to 3cm (Diameter) \/ 0.55\" to 1.18\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
3D Reindeer Head Mold | Christmas Animal Mold | Food...
$5.99 USD
{"id":10337600641,"title":"3D Reindeer Head Mold | Christmas Animal Mold | Food Safe Silicone Mold | Epoxy Resin Art Supplies (54mm x 61mm)","handle":"3d-reindeer-head-mold-christmas-animal-mold-food-safe-silicone-mold-epoxy-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e3D reindeer head silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*We have this mold in clear color now, so you can use it with UV resin as well.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.4cm (W) x 6.1cm (L) x 3.3cm (Depth) \/ 2.13\" (W) x 2.4\" (L) x 1.3\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-21T18:00:06-11:00","created_at":"2017-10-21T22:25:28-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Animal Mold","tags":["3D reindeer","animal mold","cabochon mold","Christmas Decoration","Christmas Embellishment","Christmas Embellishments","christmas mold","Decoden mold","deer mold","epoxy resin","flexible mold","reindeer head","reindeer mold","resin art","resin craft","resin mold","resin mould","silicone mold","soft mold"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38649241665,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD040A","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"3D Reindeer Head Mold | Christmas Animal Mold | Food Safe Silicone Mold | Epoxy Resin Art Supplies (54mm x 61mm)","public_title":null,"options":["Default Title"],"price":599,"weight":136,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD040A.jpg?v=1517671500","\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD040A_NEW.jpg?v=1553965076"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/products\/MD040A.jpg?v=1517671500","options":["Title"],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003e3D reindeer head silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e*We have this mold in clear color now, so you can use it with UV resin as well.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.4cm (W) x 6.1cm (L) x 3.3cm (Depth) \/ 2.13\" (W) x 2.4\" (L) x 1.3\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ This molds can withstand temperatures as high as 446 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}