Products
★Measurement: Approx. 1.9cm (W) x 0.9cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530230657,"title":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344","handle":"kawaii-silicone-flexible-mold-bow-tie-candy-19mm-miniature-food-cupcake-jewelry-charms-resin-clay-fimo-gum-paste-fondant-md344","description":"\u003cp\u003e★Measurement: Approx. 1.9cm (W) x 0.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:45:00-11:00","created_at":"2016-03-26T01:45:23-11:00","vendor":"MiniatureSweet","type":"Candy Mold","tags":["beads mold","cabochon mold","candy mold","deco mold","dollhouse food mold","fake food mold","fimo mold","flexible mold","kawaii mold","mini food mold","polymer clay mold","silicone mold","Supplies","taffy candy mold"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943509505,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD344","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344","public_title":null,"options":["Default Title"],"price":425,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506505.jpeg?v=1517639454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506506.jpeg?v=1517639454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272546804.jpeg?v=1517639454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506507.jpeg?v=1517639454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506508.jpeg?v=1517639454"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506505.jpeg?v=1517639454","options":["Title"],"media":[{"alt":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344 - MiniatureSweet","id":107487428657,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506505.jpeg?v=1517639454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506505.jpeg?v=1517639454","width":600},{"alt":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344 - MiniatureSweet","id":107487461425,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506506.jpeg?v=1517639454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506506.jpeg?v=1517639454","width":600},{"alt":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344 - MiniatureSweet","id":107487494193,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272546804.jpeg?v=1517639454"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272546804.jpeg?v=1517639454","width":1218},{"alt":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344 - MiniatureSweet","id":107487526961,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506507.jpeg?v=1517639454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506507.jpeg?v=1517639454","width":600},{"alt":"Kawaii Silicone Flexible Mold - Bow Tie Candy (19mm) Miniature Food, Cupcake, Jewelry, Charms (Resin, Clay, Fimo, Gum Paste, Fondant) MD344 - MiniatureSweet","id":107487559729,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506508.jpeg?v=1517639454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.163506508.jpeg?v=1517639454","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.9cm (W) x 0.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.3cm (Diameter) x 0.4cm (H)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530209665,"title":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116","handle":"kawaii-silicone-flexible-mold-square-cupcake-tart-bottom-13mm-miniature-food-sweets-jewelry-charms-clay-fimo-resins-md116","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (Diameter) x 0.4cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:35:00-11:00","created_at":"2016-03-26T01:35:06-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["Cabochon","cell phone deco mold","cupcake mold","dollhouse food mold","fake food mold","fimo sweets mold","flexible mold","Handmade","kawaii mold","kitsch jewelry mold","mini food mold","miniature sweet mold","scrapbooking mold","silicone mold","Supplies","tart bottom mold"],"price":475,"price_min":475,"price_max":475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943477313,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD116","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116","public_title":null,"options":["Default Title"],"price":475,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235077701.jpeg?v=1517639465","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061846.jpeg?v=1517639465","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960347.jpeg?v=1517639465","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061446.jpeg?v=1517639465","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061448.jpeg?v=1517639465"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235077701.jpeg?v=1517639465","options":["Title"],"media":[{"alt":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116 - MiniatureSweet","id":107450695729,"position":1,"preview_image":{"aspect_ratio":1.017,"height":590,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235077701.jpeg?v=1517639465"},"aspect_ratio":1.017,"height":590,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235077701.jpeg?v=1517639465","width":600},{"alt":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116 - MiniatureSweet","id":107450728497,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061846.jpeg?v=1517639465"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061846.jpeg?v=1517639465","width":600},{"alt":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116 - MiniatureSweet","id":107450761265,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960347.jpeg?v=1517639465"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960347.jpeg?v=1517639465","width":1218},{"alt":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116 - MiniatureSweet","id":107450794033,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061446.jpeg?v=1517639465"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061446.jpeg?v=1517639465","width":600},{"alt":"Kawaii Silicone Flexible Mold - Square Cupcake \/ Tart Bottom (13mm) Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins) MD116 - MiniatureSweet","id":107450826801,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061448.jpeg?v=1517639465"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235061448.jpeg?v=1517639465","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (Diameter) x 0.4cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Charms Resin Push Mold ★Measurement: approx. 1.5cm (W)...
Sold Out
{"id":5530228929,"title":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328","handle":"kawaii-silicone-flexible-mold-cake-heart-15mm-decoden-miniature-mold-sweets-fimo-polymer-clay-food-jewelry-cabochon-resin-push-mold-md328","description":"\u003cp\u003eKawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Charms Resin Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.4cm (L) x 0.5cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:44:00-11:00","created_at":"2016-03-26T01:44:33-11:00","vendor":"MiniatureSweet","type":"Sweets Mold","tags":["cabochon mold","cake mold","deco sweets mold","decoden supplies","dollhouse food mold","fake food mold","flexible mold","Handmade","kawaii mold","mini food mold","mini mold","miniature food mold","Scrapbooking","sculpey mold","silicone mold","Supplies"],"price":475,"price_min":475,"price_max":475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943504705,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD328","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328","public_title":null,"options":["Default Title"],"price":475,"weight":9,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159729.jpeg?v=1517639490","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159730.jpeg?v=1517639490","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272559270.jpeg?v=1517639490","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159731.jpeg?v=1517639490","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159732.jpeg?v=1517639490"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159729.jpeg?v=1517639490","options":["Title"],"media":[{"alt":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328 - MiniatureSweet","id":107484774449,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159729.jpeg?v=1517639490"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159729.jpeg?v=1517639490","width":600},{"alt":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328 - MiniatureSweet","id":107484807217,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159730.jpeg?v=1517639490"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159730.jpeg?v=1517639490","width":600},{"alt":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328 - MiniatureSweet","id":107484839985,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272559270.jpeg?v=1517639490"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272559270.jpeg?v=1517639490","width":1218},{"alt":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328 - MiniatureSweet","id":107484872753,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159731.jpeg?v=1517639490"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159731.jpeg?v=1517639490","width":600},{"alt":"Kawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Resin Push Mold MD328 - MiniatureSweet","id":107484905521,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159732.jpeg?v=1517639490"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.159159732.jpeg?v=1517639490","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eKawaii Silicone Flexible Mold Cake Heart 15mm Decoden Miniature Mold Sweets Fimo Polymer Clay Food Jewelry Cabochon Charms Resin Push Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.5cm (W) x 1.4cm (L) x 0.5cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Assorted kawaii silicone mold in various shapes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy...
$3.99 USD
{"id":1481456615473,"title":"Kawaii Silicone Mold Assortment (14 Cavity) | Bunny Rabbit Kitty Cat Bear Animal Apple Fruit Heart Star Bow Flower Mold | Resin Art Supplies","handle":"kawaii-silicone-mold-assortment-bunny-rabbit-kitty-cat-bear-animal-apple-fruit-heart-star-bow-flower-mold-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted kawaii silicone mold in various shapes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: \u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 2.4cm (W) x 1.9cm (L) \/ 0.94\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bow: approx. 2.1cm (W) x 1.3cm (L) \/ 0.83\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 2.3cm (W) x 2.2cm (L) \/ 0.91\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e- Apple: approx. 2cm (W) x 2cm (L) \/ 0.79\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bunny: approx. 1.9cm (W) x 2.2cm (L) \/ 0.75\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bear: approx. 2cm (W) x 1.8cm (L) \/ 0.79\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003e- Cat: \u003cspan\u003eapprox. 2cm (W) x 1.8cm (L) \/ 0.79\" (W) x 0.71\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Flower: approx. 2.4cm (W) x 2.3cm (L) \/ 0.94\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-10-12T12:52:43-11:00","created_at":"2018-10-06T00:08:42-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Flower Mold, Heart Mold, Star Mold, Bow Mold, Fruit Mold, Mold Mix","tags":["animal mold","apple mold","bear mold","bow mold","bunny mold","cabochon mold","cat mold","clear mold","epoxy resin","flexible mold","floral mold","flower mold","fruit mold","heart mold","kawaii mold","kitty mold","rabbit mold","resin art","resin craft","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","star mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13601164558385,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Silicone Mold Assortment (14 Cavity) | Bunny Rabbit Kitty Cat Bear Animal Apple Fruit Heart Star Bow Flower Mold | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":399,"weight":65,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_2aea4031-3d5e-4027-9652-41b932873d98.jpg?v=1538825100","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_11232777-011a-4dec-89dc-634f3e5caebc.jpg?v=1538825100","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03.jpg?v=1538825101"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_2aea4031-3d5e-4027-9652-41b932873d98.jpg?v=1538825100","options":["Title"],"media":[{"alt":"Kawaii Silicone Mold Assortment (14 Cavity) | Bunny Rabbit Kitty Cat Bear Animal Apple Fruit Heart Star Bow Flower Mold | Resin Art Supplies - MiniatureSweet","id":2654397235335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_2aea4031-3d5e-4027-9652-41b932873d98.jpg?v=1538825100"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029_2aea4031-3d5e-4027-9652-41b932873d98.jpg?v=1538825100","width":600},{"alt":"Kawaii Silicone Mold Assortment (14 Cavity) | Bunny Rabbit Kitty Cat Bear Animal Apple Fruit Heart Star Bow Flower Mold | Resin Art Supplies - MiniatureSweet","id":2654397137031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_11232777-011a-4dec-89dc-634f3e5caebc.jpg?v=1538825100"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-02_11232777-011a-4dec-89dc-634f3e5caebc.jpg?v=1538825100","width":600},{"alt":"Kawaii Silicone Mold Assortment (14 Cavity) | Bunny Rabbit Kitty Cat Bear Animal Apple Fruit Heart Star Bow Flower Mold | Resin Art Supplies - MiniatureSweet","id":2654397169799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03.jpg?v=1538825101"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/029-03.jpg?v=1538825101","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eAssorted kawaii silicone mold in various shapes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: \u003c\/p\u003e\n\u003cp\u003e- Heart: approx. 2.4cm (W) x 1.9cm (L) \/ 0.94\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bow: approx. 2.1cm (W) x 1.3cm (L) \/ 0.83\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 2.3cm (W) x 2.2cm (L) \/ 0.91\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e- Apple: approx. 2cm (W) x 2cm (L) \/ 0.79\" (W) x 0.79\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bunny: approx. 1.9cm (W) x 2.2cm (L) \/ 0.75\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e- Bear: approx. 2cm (W) x 1.8cm (L) \/ 0.79\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003e- Cat: \u003cspan\u003eapprox. 2cm (W) x 1.8cm (L) \/ 0.79\" (W) x 0.71\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Flower: approx. 2.4cm (W) x 2.3cm (L) \/ 0.94\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
★Measurement: Approx. 1.6cm (W) x 1.4cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.95 USD
{"id":5530218625,"title":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211","handle":"kawaii-silicone-mold-flexible-mold-cross-bun-bread-16mm-miniature-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md211","description":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:39:00-11:00","created_at":"2016-03-26T01:39:29-11:00","vendor":"MiniatureSweet","type":"Bread Mold","tags":["bakery mold","beads mold","bread mold","cabochon mold","decoden mold","dollhouse mold","fake food mold","flexible mold","Handmade","kawaii mold","kitsch jewelry mold","polymer clay mold","Scrapbooking","sculpey mold","silicone mold mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943489985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD211","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031071.jpeg?v=1517639512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031072.jpeg?v=1517639512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960889.jpeg?v=1517639512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031073.jpeg?v=1517639512","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031074.jpeg?v=1517639512"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031071.jpeg?v=1517639512","options":["Title"],"media":[{"alt":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211 - MiniatureSweet","id":107466457137,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031071.jpeg?v=1517639512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031071.jpeg?v=1517639512","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211 - MiniatureSweet","id":107466489905,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031072.jpeg?v=1517639512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031072.jpeg?v=1517639512","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211 - MiniatureSweet","id":107466522673,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960889.jpeg?v=1517639512"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.273960889.jpeg?v=1517639512","width":1218},{"alt":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211 - MiniatureSweet","id":107466555441,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031073.jpeg?v=1517639512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031073.jpeg?v=1517639512","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Cross Bun \/ Bread (16mm) Miniature Sweets, Jewelry, Charms (Clay Fimo Resin Gum Paste Fondant) MD211 - MiniatureSweet","id":107466588209,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031074.jpeg?v=1517639512"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190031074.jpeg?v=1517639512","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 2.1cm (Diameter of bottom) x 1.1cm (Deep)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown...
$5.45 USD
{"id":5530233217,"title":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373","handle":"kawaii-silicone-mold-flexible-mold-swirl-whipped-chocolate-pudding-cookie-21mm-miniature-sweets-jewelry-charms-fimo-fondant-md373","description":"\u003cp\u003e★Measurement: Approx. 2.1cm (Diameter of bottom) x 1.1cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:46:00-11:00","created_at":"2016-03-26T01:46:44-11:00","vendor":"MiniatureSweet","type":"Chocolate Mold","tags":["cabochon mold","chocolate mold","clay mold","cookie mold","deco den mold","deco mold","embellishment mold","fake food mold","flexible mold","gum paste mold","Handmade","kawaii mold","polymer clay mold","Scrapbooking","silicone mold","Supplies"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943515713,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD373","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373","public_title":null,"options":["Default Title"],"price":545,"weight":15,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274725.jpeg?v=1517639492","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274731.jpeg?v=1517639492","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272558018.jpeg?v=1517639492","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274307.jpeg?v=1517639492","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237257034.jpeg?v=1517639492"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274725.jpeg?v=1517639492","options":["Title"],"media":[{"alt":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373 - MiniatureSweet","id":107491721265,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274725.jpeg?v=1517639492"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274725.jpeg?v=1517639492","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373 - MiniatureSweet","id":107491754033,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274731.jpeg?v=1517639492"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274731.jpeg?v=1517639492","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373 - MiniatureSweet","id":107491786801,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272558018.jpeg?v=1517639492"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272558018.jpeg?v=1517639492","width":1218},{"alt":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373 - MiniatureSweet","id":107491819569,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274307.jpeg?v=1517639492"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237274307.jpeg?v=1517639492","width":600},{"alt":"Kawaii Silicone Mold Flexible Mold - Swirl Whipped Chocolate Pudding Cookie (21mm) Miniature Sweets Jewelry Charms (Fimo Fondant) MD373 - MiniatureSweet","id":107491852337,"position":5,"preview_image":{"aspect_ratio":1.167,"height":514,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237257034.jpeg?v=1517639492"},"aspect_ratio":1.167,"height":514,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237257034.jpeg?v=1517639492","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.1cm (Diameter of bottom) x 1.1cm (Deep)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
19 cavity flexible silicone mold for making kawaii cabochons such as crown, bow, ribbon, heart, etc. No releasing agent is needed, finished work can be...
$4.99 USD
{"id":6592452801,"title":"Kawaii Silicone Mold | Crown Bow Ribbon Heart Flexible Mould (19 Cavity) | Clay \u0026 Resin Craft Supplies","handle":"kawaii-silicone-mold-crown-bow-ribbon-heart-flexible-mould-19-cavity-clay-resin-craft-supplies","description":"\u003cp\u003e19 cavity flexible silicone mold for making kawaii cabochons such as crown, bow, ribbon, heart, etc. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e***This mold is now available in clear color so you can use it with UV resin, we do not make the pink color anymore***\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. from 1cm to 3.2cm \/ 0.39\" to 1.26\"\u003c\/p\u003e\n\u003cp\u003e★Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2016-06-13T16:02:00-11:00","created_at":"2016-06-13T20:40:14-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Bow Mold, Crown Mold, Mold Mix","tags":["bow mold","bow tie mold","bowtie mold","cabochon making","clay mold","crown","cute mold","epoxy resin mold","flexible mold","heart mold","kawaii mold","resin art","resin craft","ribbon mold","silicone mold"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20769919617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD044","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Silicone Mold | Crown Bow Ribbon Heart Flexible Mould (19 Cavity) | Clay \u0026 Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":499,"weight":72,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044.jpg?v=1517658089","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044_b3fea4a0-43e6-4caa-9ff7-571ae230a263.jpg?v=1523268312","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044-02_46d99532-a218-4f76-b523-e9bb6724d6bb.jpg?v=1523268312"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044.jpg?v=1517658089","options":["Title"],"media":[{"alt":"Kawaii Silicone Mold | Crown Bow Ribbon Heart Flexible Mould (19 Cavity) | Clay \u0026 Resin Craft Supplies - MiniatureSweet","id":119846797361,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044.jpg?v=1517658089"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044.jpg?v=1517658089","width":600},{"alt":"Kawaii Silicone Mold | Crown Bow Ribbon Heart Flexible Mould (19 Cavity) | Clay \u0026 Resin Craft Supplies - MiniatureSweet","id":119846830129,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044_b3fea4a0-43e6-4caa-9ff7-571ae230a263.jpg?v=1523268312"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044_b3fea4a0-43e6-4caa-9ff7-571ae230a263.jpg?v=1523268312","width":600},{"alt":"Kawaii Silicone Mold | Crown Bow Ribbon Heart Flexible Mould (19 Cavity) | Clay \u0026 Resin Craft Supplies - MiniatureSweet","id":119846862897,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044-02_46d99532-a218-4f76-b523-e9bb6724d6bb.jpg?v=1523268312"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD044-02_46d99532-a218-4f76-b523-e9bb6724d6bb.jpg?v=1523268312","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e19 cavity flexible silicone mold for making kawaii cabochons such as crown, bow, ribbon, heart, etc. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e***This mold is now available in clear color so you can use it with UV resin, we do not make the pink color anymore***\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. from 1cm to 3.2cm \/ 0.39\" to 1.26\"\u003c\/p\u003e\n\u003cp\u003e★Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}
Kawaii star shaker charm silicone mold. Perfect for shaker charm, waterfall charm making. Buy the clear film to seal the shaker. How to use: 1. Pour resin...
$4.99 USD
{"id":7199286362265,"title":"Kawaii Star Shaker with Shaker Bits Silicone Mold (14 Cavity) | Magical Girl Shaker Charm DIY | Resin Art Supplies","handle":"kawaii-star-shaker-with-shaker-bits-silicone-mold-magical-girl-shaker-charm-diy-resin-art-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii star shaker charm silicone mold. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e:\u003c\/p\u003e\n\u003cp\u003e- Star Shaker: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 6.7cm (W) x 6.3cm (L) \/ 2.64\" (W) x 2.48\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e- Star: approx. 6mm and 12mm (W) \/ 0.24\" and 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e- Heart: approx. 6mm and 12mm (W) \/ \u003cmeta charset=\"utf-8\"\u003e0.24\" and 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.3cm (W) x 2.1cm (L) \/ 0.91\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e- Wing: approx. 1.5cm (W) x 0.9cm (L) \/ 0.59\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-11-22T17:31:17-11:00","created_at":"2021-11-22T17:17:35-11:00","vendor":"MiniatureSweet","type":"Star Mold, Shaker Mold, Mold Mix","tags":["angel wing mold","angel wings","bezel mold","cabochon mold","cell phone decoration","decoden supplies","epoxy resin","flexible mold","heart mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","magical girl","mahou kei","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","ribbon mold","shaker charm","shaker mold","Silicone Mold","soft mold","star mold","waterfall charm"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41531412775065,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3006E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Star Shaker with Shaker Bits Silicone Mold (14 Cavity) | Magical Girl Shaker Charm DIY | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":499,"weight":90,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_be0614a6-7b9e-4b4a-8c86-467f739938ce.jpg?v=1637641454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_ab114c13-978e-4446-b5a1-ca96fbd1d5c4.jpg?v=1637641454","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_01a7fafa-623c-49b8-9b80-67fca262450d.jpg?v=1637641071"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_be0614a6-7b9e-4b4a-8c86-467f739938ce.jpg?v=1637641454","options":["Title"],"media":[{"alt":"Kawaii Star Shaker with Shaker Bits Silicone Mold (14 Cavity) | Magical Girl Shaker Charm DIY | Resin Art Supplies - MiniatureSweet","id":25403834466457,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_be0614a6-7b9e-4b4a-8c86-467f739938ce.jpg?v=1637641454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-02_be0614a6-7b9e-4b4a-8c86-467f739938ce.jpg?v=1637641454","width":600},{"alt":"Kawaii Star Shaker with Shaker Bits Silicone Mold (14 Cavity) | Magical Girl Shaker Charm DIY | Resin Art Supplies - MiniatureSweet","id":25403834499225,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_ab114c13-978e-4446-b5a1-ca96fbd1d5c4.jpg?v=1637641454"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001-03_ab114c13-978e-4446-b5a1-ca96fbd1d5c4.jpg?v=1637641454","width":600},{"alt":"Kawaii Star Shaker with Shaker Bits Silicone Mold (14 Cavity) | Magical Girl Shaker Charm DIY | Resin Art Supplies - MiniatureSweet","id":25403834531993,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_01a7fafa-623c-49b8-9b80-67fca262450d.jpg?v=1637641071"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_01a7fafa-623c-49b8-9b80-67fca262450d.jpg?v=1637641071","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii star shaker charm silicone mold. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Clear Film (10 pieces)\" href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e:\u003c\/p\u003e\n\u003cp\u003e- Star Shaker: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eapprox. 6.7cm (W) x 6.3cm (L) \/ 2.64\" (W) x 2.48\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e- Star: approx. 6mm and 12mm (W) \/ 0.24\" and 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e- Heart: approx. 6mm and 12mm (W) \/ \u003cmeta charset=\"utf-8\"\u003e0.24\" and 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.3cm (W) x 2.1cm (L) \/ 0.91\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e- Wing: approx. 1.5cm (W) x 0.9cm (L) \/ 0.59\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Assorted star silicone mold in various sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy...
$3.99 USD
{"id":1481562947633,"title":"Kawaii Star Silicone Mold Assortment (4 Cavity) | Decoden Resin Cabochon Mold | Clear Mould for UV Resin Art | Epoxy Resin Mould","handle":"kawaii-star-silicone-mold-assortment-decoden-resin-cabochon-mold-clear-mould-for-uv-resin-art-epoxy-resin-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted star silicone mold in various sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.8cm, 2.6cm, 3.5cm and 4.5cm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-10-15T04:16:15-11:00","created_at":"2018-10-06T23:22:39-11:00","vendor":"MiniatureSweet","type":"Star Mold, Mold Mix","tags":["cabochon mold","Clear Mold","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","star mold","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13601617182769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2075A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Star Silicone Mold Assortment (4 Cavity) | Decoden Resin Cabochon Mold | Clear Mould for UV Resin Art | Epoxy Resin Mould","public_title":null,"options":["Default Title"],"price":399,"weight":73,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_909c9225-9d52-4818-a458-1d8431d6d0c8.jpg?v=1538920521","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_f9299ba0-6be4-4f6f-b7e4-1d6031b05549.jpg?v=1538920521"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_909c9225-9d52-4818-a458-1d8431d6d0c8.jpg?v=1538920521","options":["Title"],"media":[{"alt":"Kawaii Star Silicone Mold Assortment (4 Cavity) | Decoden Resin Cabochon Mold | Clear Mould for UV Resin Art | Epoxy Resin Mould - MiniatureSweet","id":2654436786311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_909c9225-9d52-4818-a458-1d8431d6d0c8.jpg?v=1538920521"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_909c9225-9d52-4818-a458-1d8431d6d0c8.jpg?v=1538920521","width":600},{"alt":"Kawaii Star Silicone Mold Assortment (4 Cavity) | Decoden Resin Cabochon Mold | Clear Mould for UV Resin Art | Epoxy Resin Mould - MiniatureSweet","id":2654436720775,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_f9299ba0-6be4-4f6f-b7e4-1d6031b05549.jpg?v=1538920521"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009-02_f9299ba0-6be4-4f6f-b7e4-1d6031b05549.jpg?v=1538920521","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted star silicone mold in various sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.8cm, 2.6cm, 3.5cm and 4.5cm (W)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Flexible star wand silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...
$1.69 USD
{"id":8555740801,"title":"Kawaii Star Wand Silicone Mold | Power Stick Mould | Magical Girl Jewelry DIY | Mahou Kei Resin Art | Fairy Kei Cabochon Making (19mm x 34mm)","handle":"kawaii-star-wand-silicone-mold-power-stick-mould-magical-girl-jewelry-diy-mahou-kei-resin-art-fairy-kei-cabochon-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible star wand silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.9cm (W) x 3.4cm (L) \/ 0.75\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-16T22:21:00-11:00","created_at":"2016-12-16T22:15:47-11:00","vendor":"MiniatureSweet","type":"Fairytale Mold","tags":["cabochon making","decoden","Fairy Kei","Flexible Mould","kawaii mold","kawaii star","Magical Girl","mahou kei","Power Stick","resin art","Silicone Mold","star wand","Wand Mould"],"price":169,"price_min":169,"price_max":169,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28874539201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD992","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Star Wand Silicone Mold | Power Stick Mould | Magical Girl Jewelry DIY | Mahou Kei Resin Art | Fairy Kei Cabochon Making (19mm x 34mm)","public_title":null,"options":["Default Title"],"price":169,"weight":5,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD992.jpg?v=1517665833"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD992.jpg?v=1517665833","options":["Title"],"media":[{"alt":"Kawaii Star Wand Silicone Mold | Power Stick Mould | Magical Girl Jewelry DIY | Mahou Kei Resin Art | Fairy Kei Cabochon Making (19mm x 34mm) - MiniatureSweet","id":209063084081,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD992.jpg?v=1517665833"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD992.jpg?v=1517665833","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible star wand silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 1.9cm (W) x 3.4cm (L) \/ 0.75\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Kawaii bear shaped tamagotchi resin shaker mold. Perfect for shaker charm, waterfall charm making. How to use: 1. Pour resin into the mold. 2. Take the resin...
$1.59 USD
{"id":5589868249241,"title":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm)","handle":"kawaii-tamagotchi-resin-shaker-charm-silicone-mold-in-bear-shape-shake-shake-decoden-cabochon-diy","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii\u003cspan\u003e bear shaped tamagotchi\u003c\/span\u003e resin shaker mold. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e3. Seal it with clear plastic sheet (can be purchased separately in this listing), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.3cm (W) x 7.1cm (L) \/ 2.09\" (W) x 2.8\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-09-05T21:38:20-11:00","created_at":"2020-09-01T14:59:30-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Other Mold, Shaker Mold","tags":["animal mold","bear mold","bezel mold","cabochon mold","cell phone decoration","decoden supplies","digital pet","epoxy resin","flexible mold","handheld game console","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shake shaker","shaker charm","shaker mold","Silicone Mold","soft mold","tamagotchi mold","UV resin","video game","waterfall charm"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35905683521689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD090B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm)","public_title":null,"options":["Default Title"],"price":159,"weight":20,"compare_at_price":null,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_36ca363e-923a-4de2-b918-2a111576f448.jpg?v=1599111240","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_8dfbb526-f09b-4310-9f7d-6656e55c7cdb.jpg?v=1599111241","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_4a44b602-62fc-445e-a879-7bdf0be56df9.jpg?v=1599111241","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-04_9a2b0c83-71d1-437d-adf3-f5201922841b.jpg?v=1599111242"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_36ca363e-923a-4de2-b918-2a111576f448.jpg?v=1599111240","options":["Title"],"media":[{"alt":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm) - MiniatureSweet","id":10977766572185,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_36ca363e-923a-4de2-b918-2a111576f448.jpg?v=1599111240"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006_36ca363e-923a-4de2-b918-2a111576f448.jpg?v=1599111240","width":600},{"alt":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm) - MiniatureSweet","id":10977766473881,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_8dfbb526-f09b-4310-9f7d-6656e55c7cdb.jpg?v=1599111241"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-02_8dfbb526-f09b-4310-9f7d-6656e55c7cdb.jpg?v=1599111241","width":600},{"alt":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm) - MiniatureSweet","id":10977766506649,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_4a44b602-62fc-445e-a879-7bdf0be56df9.jpg?v=1599111241"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-03_4a44b602-62fc-445e-a879-7bdf0be56df9.jpg?v=1599111241","width":600},{"alt":"Kawaii Tamagotchi Resin Shaker Charm Silicone Mold in Bear Shape | Shake Shake Decoden Cabochon DIY (53mm x 71mm) - MiniatureSweet","id":10977766539417,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-04_9a2b0c83-71d1-437d-adf3-f5201922841b.jpg?v=1599111242"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/006-04_9a2b0c83-71d1-437d-adf3-f5201922841b.jpg?v=1599111242","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eKawaii\u003cspan\u003e bear shaped tamagotchi\u003c\/span\u003e resin shaker mold. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e3. Seal it with clear plastic sheet (can be purchased separately in this listing), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 5.3cm (W) x 7.1cm (L) \/ 2.09\" (W) x 2.8\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Small teddy bear silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
$2.29 USD
{"id":1392512172081,"title":"Kawaii Teddy Bear Toy Silicone Mold (4 Cavity) | Animal Mould | Soft Clear Mould for UV Resin Art (10mm to 13mm)","handle":"kawaii-teddy-bear-toy-silicone-mold-animal-mould-soft-clear-mould-for-uv-resin-art","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall teddy bear silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Bear Head: approx. 12mm (W) x 9mm (L) \/ 0.47\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small Bear: approx. 10mm (W) x 12mm (L) \/ 0.39\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Big Bear: approx. 13mm (W) x 15mm (L) \/ 0.51\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\u003c\/div\u003e","published_at":"2018-09-08T22:47:53-11:00","created_at":"2018-09-08T21:32:04-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Mold Mix","tags":["animal toy mold","bear head mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","teddy bear mold","UV resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12492798197809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1252","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Teddy Bear Toy Silicone Mold (4 Cavity) | Animal Mould | Soft Clear Mould for UV Resin Art (10mm to 13mm)","public_title":null,"options":["Default Title"],"price":229,"weight":14,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_7beb1c55-7e1d-494f-9497-72c4b6d99be8.jpg?v=1536493777","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_10e10759-91d7-4ac2-a11d-fa869ae51f51.jpg?v=1536493777"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_7beb1c55-7e1d-494f-9497-72c4b6d99be8.jpg?v=1536493777","options":["Title"],"media":[{"alt":"Kawaii Teddy Bear Toy Silicone Mold (4 Cavity) | Animal Mould | Soft Clear Mould for UV Resin Art (10mm to 13mm) - MiniatureSweet","id":2635203051655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_7beb1c55-7e1d-494f-9497-72c4b6d99be8.jpg?v=1536493777"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_7beb1c55-7e1d-494f-9497-72c4b6d99be8.jpg?v=1536493777","width":600},{"alt":"Kawaii Teddy Bear Toy Silicone Mold (4 Cavity) | Animal Mould | Soft Clear Mould for UV Resin Art (10mm to 13mm) - MiniatureSweet","id":2635203018887,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_10e10759-91d7-4ac2-a11d-fa869ae51f51.jpg?v=1536493777"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_10e10759-91d7-4ac2-a11d-fa869ae51f51.jpg?v=1536493777","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall teddy bear silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Bear Head: approx. 12mm (W) x 9mm (L) \/ 0.47\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- Small Bear: approx. 10mm (W) x 12mm (L) \/ 0.39\" (W) x 0.47\" (L)\u003c\/p\u003e\n\u003cp\u003e- Big Bear: approx. 13mm (W) x 15mm (L) \/ 0.51\" (W) x 0.59\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\u003c\/div\u003e"}
★Measurement: approx. 0.6cm to 0.7cm (Diameter) each★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530211393,"title":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136","handle":"kawaii-tiny-donut-doughnut-set-6-7mm-silicone-flexible-mold-miniature-food-sweets-jewelry-charms-clay-fimo-fondant-md136","description":"\u003cp\u003e★Measurement: approx. 0.6cm to 0.7cm (Diameter) each★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:35:00-11:00","created_at":"2016-03-26T01:35:54-11:00","vendor":"MiniatureSweet","type":"Sweets Mold, Mold Mix","tags":["cabochon mold","deco mold","decoden mold","dollhouse food mold","Donut mold","fake food mold","fimo mold","flexible mold","Handmade","kawaii mold","mini food mold","nail art mold","polymer clay mold","Scrapbooking","silicone mold","Supplies"],"price":595,"price_min":595,"price_max":595,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943479425,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD136","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136","public_title":null,"options":["Default Title"],"price":595,"weight":9,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023279.jpeg?v=1517639630","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023280.jpeg?v=1517639630","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514325.jpeg?v=1517639630","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023281.jpeg?v=1517639630","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023282.jpeg?v=1517639630"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023279.jpeg?v=1517639630","options":["Title"],"media":[{"alt":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136 - MiniatureSweet","id":107453612081,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023279.jpeg?v=1517639630"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023279.jpeg?v=1517639630","width":600},{"alt":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136 - MiniatureSweet","id":107453644849,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023280.jpeg?v=1517639630"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023280.jpeg?v=1517639630","width":600},{"alt":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136 - MiniatureSweet","id":107453677617,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514325.jpeg?v=1517639630"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514325.jpeg?v=1517639630","width":1218},{"alt":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136 - MiniatureSweet","id":107453710385,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023281.jpeg?v=1517639630"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023281.jpeg?v=1517639630","width":600},{"alt":"Kawaii Tiny Donut \/ Doughnut Set (6-7mm) Silicone Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Fondant) MD136 - MiniatureSweet","id":107453743153,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023282.jpeg?v=1517639630"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.196023282.jpeg?v=1517639630","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 0.6cm to 0.7cm (Diameter) each★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 0.8cm and 1.2cm (Diameter)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥ AREAS...
Sold Out
{"id":5530211585,"title":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139","handle":"kawaii-tiny-round-cookie-biscuit-set-8-12mm-flexible-mold-silicone-mold-miniature-food-sweets-jewelry-charms-clay-fimo-md139","description":"\u003cp\u003e★Measurement: Approx. 0.8cm and 1.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:36:00-11:00","created_at":"2016-03-26T01:36:02-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold, Mold Mix","tags":["bakery mold","cabochon mold","cookie mold","deco mold","decoden mold","dollhouse mold","fake food mold","flexible mold","Handmade","kawaii mold","mini food mold","polymer clay mold","Scrapbooking","sculpey mold","silicone mold","Supplies"],"price":525,"price_min":525,"price_max":525,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943479617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD139","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139","public_title":null,"options":["Default Title"],"price":525,"weight":13,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792627.jpeg?v=1517639610","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792628.jpeg?v=1517639610","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514941.jpeg?v=1517639610","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792629.jpeg?v=1517639610","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792630.jpeg?v=1517639610"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792627.jpeg?v=1517639610","options":["Title"],"media":[{"alt":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139 - MiniatureSweet","id":107454103601,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792627.jpeg?v=1517639610"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792627.jpeg?v=1517639610","width":600},{"alt":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139 - MiniatureSweet","id":107454136369,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792628.jpeg?v=1517639610"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792628.jpeg?v=1517639610","width":600},{"alt":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139 - MiniatureSweet","id":107454169137,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514941.jpeg?v=1517639610"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272514941.jpeg?v=1517639610","width":1218},{"alt":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139 - MiniatureSweet","id":107454201905,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792629.jpeg?v=1517639610"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792629.jpeg?v=1517639610","width":600},{"alt":"Kawaii Tiny Round Cookie \/ Biscuit Set (8, 12mm) Flexible Mold Silicone Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo) MD139 - MiniatureSweet","id":107454234673,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792630.jpeg?v=1517639610"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.186792630.jpeg?v=1517639610","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 0.8cm and 1.2cm (Diameter)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Silicone flexible mold in kawaii cat shape. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...
$0.99 USD
{"id":9753103169,"title":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm)","handle":"kawaii-uv-resin-mould-cat-mold-animal-cabochon-mold-flexible-silicone-mold-epoxy-resin-soft-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSilicone flexible mold in kawaii cat shape. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.2cm (L) \/ 1.57\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T21:46:58-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986237441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1117","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":null,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816","options":["Title"],"media":[{"alt":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm) - MiniatureSweet","id":326735331377,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSilicone flexible mold in kawaii cat shape. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.2cm (L) \/ 1.57\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
High quality 6 cavity silicone flexible molds in the shape of oval, round, heart, frame and cameo setting. No releasing agent is needed, finished work...
$3.99 USD
{"id":8663031169,"title":"Kawaii UV Resin Soft Mold (6 Cavity) | Frame Silicone Mold | Oval Mold | Round Mold | Flexible Heart Mould | Resin Pendant Making","handle":"kawaii-uv-resin-soft-mold-6-cavity-frame-silicone-mold-oval-mold-round-mold-flexible-heart-mould-resin-pendant-making","description":"\u003cp\u003eHigh quality 6 cavity silicone flexible molds in the shape of oval, round, heart, frame and cameo setting. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- oval: approx. 1.6cm (W) x 2.4cm (L) \/ 0.63\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- round: approx. 2.1cm or 0.83\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- heart: approx. 2.1cm (W) x 1.8cm (L) \/ 0.83\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003e- frame (left): approx. 2.1cm (W) x 2.7cm (L) \/ 0.83\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e- frame (middle): approx. 2.5cm (W) x 3cm (L) \/ 0.98\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- cameo setting: approx. 2.4cm (W) x 3.4cm (L) \/ 0.94\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e","published_at":"2017-01-13T01:54:00-11:00","created_at":"2017-01-13T21:31:29-11:00","vendor":"MiniatureSweet","type":"Cameo Setting Mold, Heart Mold, Round Mold, Shape Mold, Mold Mix","tags":["Epoxy Resin Crafts","Flexible Mould","Frame Mold","Heart Mould","jewellery mold","kawaii mold","Oval Mold","resin charm","Resin Pendant","Round Mold","silicone mold","Soft Mold","UV Resin Jewelry"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29388447105,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii UV Resin Soft Mold (6 Cavity) | Frame Silicone Mold | Oval Mold | Round Mold | Flexible Heart Mould | Resin Pendant Making","public_title":null,"options":["Default Title"],"price":399,"weight":37,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003.jpg?v=1517666701","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003-02.jpg?v=1517666701"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003.jpg?v=1517666701","options":["Title"],"media":[{"alt":"Kawaii UV Resin Soft Mold (6 Cavity) | Frame Silicone Mold | Oval Mold | Round Mold | Flexible Heart Mould | Resin Pendant Making - MiniatureSweet","id":222501568561,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003.jpg?v=1517666701"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003.jpg?v=1517666701","width":600},{"alt":"Kawaii UV Resin Soft Mold (6 Cavity) | Frame Silicone Mold | Oval Mold | Round Mold | Flexible Heart Mould | Resin Pendant Making - MiniatureSweet","id":222501601329,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003-02.jpg?v=1517666701"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2003-02.jpg?v=1517666701","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHigh quality 6 cavity silicone flexible molds in the shape of oval, round, heart, frame and cameo setting. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- oval: approx. 1.6cm (W) x 2.4cm (L) \/ 0.63\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- round: approx. 2.1cm or 0.83\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- heart: approx. 2.1cm (W) x 1.8cm (L) \/ 0.83\" (W) x 0.71\" (L)\u003c\/p\u003e\n\u003cp\u003e- frame (left): approx. 2.1cm (W) x 2.7cm (L) \/ 0.83\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e- frame (middle): approx. 2.5cm (W) x 3cm (L) \/ 0.98\" (W) x 1.18\" (L)\u003c\/p\u003e\n\u003cp\u003e- cameo setting: approx. 2.4cm (W) x 3.4cm (L) \/ 0.94\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e"}
★Measurement: Approx. 0.8cm (W) x 3cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.95 USD
{"id":5530258113,"title":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526","handle":"key-30mm-silicone-flexible-push-mold-jewelry-charms-cupcake-resin-paper-clay-fimo-casting-resins-wax-gum-paste-fondant-md526","description":"\u003cp\u003e★Measurement: Approx. 0.8cm (W) x 3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:52:00-11:00","created_at":"2016-03-26T01:52:50-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["bead mold","cabochon mold","cute mold","deco mold","decoration mold","embellishment","Handmade","kawaii mold","polymer clay mold","Scrapbooking","sculpey mold","Supplies","tool mold","topper mold","victorian mold","vintage mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943603265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD526","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471006.jpeg?v=1517663870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471007.jpeg?v=1517663870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471008.jpeg?v=1517663870","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471009.jpeg?v=1517663870"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471006.jpeg?v=1517663870","options":["Title"],"media":[{"alt":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526 - MiniatureSweet","id":107512954929,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471006.jpeg?v=1517663870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471006.jpeg?v=1517663870","width":600},{"alt":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526 - MiniatureSweet","id":107512987697,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471007.jpeg?v=1517663870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471007.jpeg?v=1517663870","width":600},{"alt":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526 - MiniatureSweet","id":107513020465,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471008.jpeg?v=1517663870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471008.jpeg?v=1517663870","width":600},{"alt":"Key (30mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Resin, Paper Clay, Fimo, Casting Resins, Wax, Gum Paste, Fondant) MD526 - MiniatureSweet","id":107513053233,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471009.jpeg?v=1517663870"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.183471009.jpeg?v=1517663870","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 0.8cm (W) x 3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Conversation heart charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon...
$3.99 USD
{"id":6124342575257,"title":"KISS ME Conversation Heart Pendant Silicone Mold | Resin Jewelry Making | Valentine's Day Supplies (59mm x 55mm)","handle":"kiss-me-conversation-heart-pendant-silicone-mold-resin-jewelry-making-valentines-day-supplies","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eConversation heart charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.9cm (W) x 5.5cm (L) \/ 2.32\" (W) x 2.17\" (L) \u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-02-04T18:59:08-11:00","created_at":"2021-01-31T19:04:02-11:00","vendor":"MiniatureSweet","type":"Heart Mold","tags":["charm mold","conversation heart","embellishment mold","epoxy resin","flexible mold","heart candy","heart mold","heart with message","kawaii crafts","kawaii mold","keychain mold","KISS ME","love","pendant mold","resin art","resin craft","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tag mold","valentine's day","wedding supplies"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37970843304089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2139C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"KISS ME Conversation Heart Pendant Silicone Mold | Resin Jewelry Making | Valentine's Day Supplies (59mm x 55mm)","public_title":null,"options":["Default Title"],"price":399,"weight":28,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_3e1f532d-f1c5-4b59-9c95-d55a14c9cca8.jpg?v=1612235922"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_3e1f532d-f1c5-4b59-9c95-d55a14c9cca8.jpg?v=1612235922","options":["Title"],"media":[{"alt":"KISS ME Conversation Heart Pendant Silicone Mold | Resin Jewelry Making | Valentine's Day Supplies (59mm x 55mm) - MiniatureSweet","id":17482105553049,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_3e1f532d-f1c5-4b59-9c95-d55a14c9cca8.jpg?v=1612235922"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/001_3e1f532d-f1c5-4b59-9c95-d55a14c9cca8.jpg?v=1612235922","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eConversation heart charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.9cm (W) x 5.5cm (L) \/ 2.32\" (W) x 2.17\" (L) \u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
Sold Out
{"id":9753600705,"title":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm)","handle":"kitten-mold-decoden-cabochon-mold-cat-flexible-mold-soft-clear-mould-epoxy-resin-silicone-mould-uv-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:30:10-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988565121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1122","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823","options":["Title"],"media":[{"alt":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm) - MiniatureSweet","id":326736904241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Little cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
$1.49 USD
{"id":8746844737,"title":"Kitten Silicone Mold | Little Cat Mold | Kitty Mold | Kawaii Animal Mold | Flexible UV Resin Clear Mold | Epoxy Resin Mould | Resin Craft Supplies (32mm x 27mm)","handle":"kitten-silicone-mold-little-cat-mold-kitty-mold-kawaii-animal-mold-flexible-uv-resin-clear-mold-epoxy-resin-mould-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eLittle cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.2cm (W) x 2.7cm (L) \/ 1.26\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-01-28T02:17:45-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["Cat Mold","Clear Mold","Epoxy Resin Mould","Flexible Mold","kawaii animal mold","Kawaii Mold","kitten mold","kitty mold","Little Cat","pet jewelry","silicone mold","UV Resin Mold","UV Resin Crafts"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29987068737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1053","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kitten Silicone Mold | Little Cat Mold | Kitty Mold | Kawaii Animal Mold | Flexible UV Resin Clear Mold | Epoxy Resin Mould | Resin Craft Supplies (32mm x 27mm)","public_title":null,"options":["Default Title"],"price":149,"weight":6,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1053.jpg?v=1517667131"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1053.jpg?v=1517667131","options":["Title"],"media":[{"alt":"Kitten Silicone Mold | Little Cat Mold | Kitty Mold | Kawaii Animal Mold | Flexible UV Resin Clear Mold | Epoxy Resin Mould | Resin Craft Supplies (32mm x 27mm) - MiniatureSweet","id":228961681457,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1053.jpg?v=1517667131"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1053.jpg?v=1517667131","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eLittle cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.2cm (W) x 2.7cm (L) \/ 1.26\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clay have different features, there are clay which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
Sold Out
{"id":9753234753,"title":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm)","handle":"kitty-cat-mold-resin-cabochon-mold-kawaii-animal-mould-uv-resin-silicone-mold-soft-flexible-mold-epoxy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.2cm (L) \/ 1.54\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T22:47:54-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986671361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1119","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819","options":["Title"],"media":[{"alt":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm) - MiniatureSweet","id":326736150577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.2cm (L) \/ 1.54\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii kitty ear resin ring silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. ★Measurement: - Height:...
Sold Out
{"id":8501701441,"title":"Kitty Ring Mould | Cat Ring Mold | Flexible Ring Mould | Kawaii Mold Supplies | Kitten Ear Ring Silicone Mold | Resin Animal Jewelry | Epoxy Resin Jewellery | UV Resin Mold (Size 18mm)","handle":"kitty-ring-mould-cat-ring-mold-flexible-ring-mould-kawaii-mold-supplies-kitten-ear-ring-silicone-mold-resin-animal-jewelry-epoxy-resin-jewellery-uv-resin-mold-size-18mm","description":"\u003cp\u003eKawaii kitty ear resin ring silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Height: approx. 0.35cm (H) or 0.14\"\u003c\/p\u003e\n\u003cp\u003e- Inner Diameter: approx. 1.8cm or 0.71\"\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2016-12-03T20:03:13-11:00","vendor":"MiniatureSweet","type":"Ring Mold","tags":["Animal Jewelry","Cat Ring","epoxy resin mould","Flexible Ring Mould","jewellery mold","kawaii mold","Kitten Ear Ring","Kitty Ring","Resin Jewelry","Ring Mold","Ring Mould","Silicone Mold","UV Resin Mold"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28704128449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD921","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kitty Ring Mould | Cat Ring Mold | Flexible Ring Mould | Kawaii Mold Supplies | Kitten Ear Ring Silicone Mold | Resin Animal Jewelry | Epoxy Resin Jewellery | UV Resin Mold (Size 18mm)","public_title":null,"options":["Default Title"],"price":99,"weight":4,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD921.jpg?v=1517665318","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD919-sample_072c8a53-7054-4b2a-ba3d-f3db76195d6f.jpg?v=1517665318","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD911-sample_c3a7cf00-4c64-4459-865e-48fa2b790d5f.jpg?v=1517665318"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD921.jpg?v=1517665318","options":["Title"],"media":[{"alt":"Kitty Ring Mould | Cat Ring Mold | Flexible Ring Mould | Kawaii Mold Supplies | Kitten Ear Ring Silicone Mold | Resin Animal Jewelry | Epoxy Resin Jewellery | UV Resin Mold (Size 18mm) - MiniatureSweet","id":206974320689,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD921.jpg?v=1517665318"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD921.jpg?v=1517665318","width":600},{"alt":"Kitty Ring Mould | Cat Ring Mold | Flexible Ring Mould | Kawaii Mold Supplies | Kitten Ear Ring Silicone Mold | Resin Animal Jewelry | Epoxy Resin Jewellery | UV Resin Mold (Size 18mm) - MiniatureSweet","id":206974287921,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD919-sample_072c8a53-7054-4b2a-ba3d-f3db76195d6f.jpg?v=1517665318"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD919-sample_072c8a53-7054-4b2a-ba3d-f3db76195d6f.jpg?v=1517665318","width":600},{"alt":"Kitty Ring Mould | Cat Ring Mold | Flexible Ring Mould | Kawaii Mold Supplies | Kitten Ear Ring Silicone Mold | Resin Animal Jewelry | Epoxy Resin Jewellery | UV Resin Mold (Size 18mm) - MiniatureSweet","id":206974255153,"position":3,"preview_image":{"aspect_ratio":1.096,"height":572,"width":627,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD911-sample_c3a7cf00-4c64-4459-865e-48fa2b790d5f.jpg?v=1517665318"},"aspect_ratio":1.096,"height":572,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD911-sample_c3a7cf00-4c64-4459-865e-48fa2b790d5f.jpg?v=1517665318","width":627}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eKawaii kitty ear resin ring silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold.\u003c\/p\u003e\n\u003cp\u003e★Measurement:\u003c\/p\u003e\n\u003cp\u003e- Height: approx. 0.35cm (H) or 0.14\"\u003c\/p\u003e\n\u003cp\u003e- Inner Diameter: approx. 1.8cm or 0.71\"\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e"}
Flexible cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...
$0.99 USD
{"id":8595281025,"title":"Kitty Silicone Mold | Cat Cabochon Mold | Kitten Mould | Animal Resin Mold | Kawaii Mold | Decoden Supplies | Epoxy Resin Flexible Mould (26mm x 34mm)","handle":"kitty-silicone-mold-cat-cabochon-mold-kitten-mould-animal-resin-mold-kawaii-mold-decoden-supplies-epoxy-resin-flexible-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 3.4cm (L) \/ 1.02\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-18T18:08:00-11:00","created_at":"2016-12-27T16:55:30-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["Animal Mold","cabochon mold","cat mold","Clear Mold","Decoden Supplies","epoxy resin","Flexible Mould","Kawaii Mold","Kitten Mould","kitty mold","resin mold","silicone mold","UV Resin Art"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29035524033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1013","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kitty Silicone Mold | Cat Cabochon Mold | Kitten Mould | Animal Resin Mold | Kawaii Mold | Decoden Supplies | Epoxy Resin Flexible Mould (26mm x 34mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1013.jpg?v=1517666282"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1013.jpg?v=1517666282","options":["Title"],"media":[{"alt":"Kitty Silicone Mold | Cat Cabochon Mold | Kitten Mould | Animal Resin Mold | Kawaii Mold | Decoden Supplies | Epoxy Resin Flexible Mould (26mm x 34mm) - MiniatureSweet","id":214265036849,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1013.jpg?v=1517666282"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1013.jpg?v=1517666282","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 3.4cm (L) \/ 1.02\" (W) x 1.34\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
★Measurement: Approx. 1.5cm (W) x 1.5cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.95 USD
{"id":5530242241,"title":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419","handle":"koala-15mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-wax-soap-epoxy-casting-resins-gum-paste-fondant-md419","description":"\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:49:00-11:00","created_at":"2016-03-26T01:49:13-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","australia deco mold","bear mold","cabochon mold","deco mold","decoden mold","embellishment","Handmade","kawaii mold","mini zoo deco mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","shower deco mold","Supplies"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943550913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD419","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766043.jpeg?v=1517639810","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766058.jpeg?v=1517639810","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766105.jpeg?v=1517639810","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766145.jpeg?v=1517639810"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766043.jpeg?v=1517639810","options":["Title"],"media":[{"alt":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419 - MiniatureSweet","id":107498668081,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766043.jpeg?v=1517639810"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766043.jpeg?v=1517639810","width":600},{"alt":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419 - MiniatureSweet","id":107498700849,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766058.jpeg?v=1517639810"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766058.jpeg?v=1517639810","width":600},{"alt":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419 - MiniatureSweet","id":107498733617,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766105.jpeg?v=1517639810"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766105.jpeg?v=1517639810","width":600},{"alt":"Koala (15mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Wax, Soap, Epoxy, Casting Resins, Gum Paste, Fondant) MD419 - MiniatureSweet","id":107498766385,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766145.jpeg?v=1517639810"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191766145.jpeg?v=1517639810","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.5cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii shaker mold in candy bag shape and the word "Konpeito" on it. Perfect for shaker charm, waterfall charm making. Buy the clear film to seal the shaker....
$1.39 USD
{"id":5482458382489,"title":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm)","handle":"konpeito-candy-bag-silicone-mold-candy-wrapper-mould-kawaii-resin-shaker-charm-making-decoden-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in candy bag shape and the word \"Konpeito\" on it. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 3.9cm (W) x 4.7cm (L) \/ 1.54\" (W) x 1.85\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T14:33:44-11:00","created_at":"2020-08-05T23:02:44-11:00","vendor":"MiniatureSweet","type":"Candy Mold, Shaker Mold","tags":["bezel mold","cabochon mold","candy bag mold","candy mold","candy wrapper mold","cell phone decoration","decoden supplies","epoxy resin","flexible mold","hollow mold","kawaii crafts","kawaii mold","Konpeito mold","liquid charm","liquid shaker","phone case deco","resin art","resin craft","resin mold","Resin Mould","resin piece","resin shaker","shaker charm","shaker mold","Silicone Mold","snack mold","soft mold","sweet deco","sweets deco","UV resin","waterfall charm"],"price":139,"price_min":139,"price_max":139,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35464594129049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1115A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm)","public_title":null,"options":["Default Title"],"price":139,"weight":14,"compare_at_price":null,"inventory_quantity":32,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_6dbdb02d-e038-4228-bc18-04809bc0328e.jpg?v=1596743044","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_c7ddc33d-28f2-4550-833b-b6e215f5656f.jpg?v=1596743045","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_982aa88d-aa29-49df-9b4d-280864e1a2b8.jpg?v=1596743045","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-04_8c82f114-2bdd-4440-8054-179690c8d617.jpg?v=1596743046"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_6dbdb02d-e038-4228-bc18-04809bc0328e.jpg?v=1596743044","options":["Title"],"media":[{"alt":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm) - MiniatureSweet","id":10507405263001,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_6dbdb02d-e038-4228-bc18-04809bc0328e.jpg?v=1596743044"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_6dbdb02d-e038-4228-bc18-04809bc0328e.jpg?v=1596743044","width":600},{"alt":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm) - MiniatureSweet","id":10507405033625,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_c7ddc33d-28f2-4550-833b-b6e215f5656f.jpg?v=1596743045"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_c7ddc33d-28f2-4550-833b-b6e215f5656f.jpg?v=1596743045","width":600},{"alt":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm) - MiniatureSweet","id":10507405066393,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_982aa88d-aa29-49df-9b4d-280864e1a2b8.jpg?v=1596743045"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-03_982aa88d-aa29-49df-9b4d-280864e1a2b8.jpg?v=1596743045","width":600},{"alt":"Konpeito Candy Bag Silicone Mold | Candy Wrapper Mould | Kawaii Resin Shaker Charm Making | Decoden Supplies (39mm x 47mm) - MiniatureSweet","id":10507405131929,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-04_8c82f114-2bdd-4440-8054-179690c8d617.jpg?v=1596743046"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-04_8c82f114-2bdd-4440-8054-179690c8d617.jpg?v=1596743046","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in candy bag shape and the word \"Konpeito\" on it. Perfect for shaker charm, waterfall charm making.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBuy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003eclear film\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto seal the shaker.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to use:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Pour resin into the mold.\u003c\/p\u003e\n\u003cp\u003e2. Take the resin piece out and add glitter, confetti, embellishments, floating charms, rhinestones or anything colorful, kawaii, sparkle, etc into the tray.\u003c\/p\u003e\n\u003cp\u003e3. Seal it with clear plastic sheet (can be purchased\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturesweethk.com\/products\/clear-plastic-film-for-resin-shaker-charm-making-transparent-plastic-sheet-for-shaker-cabochon-sealing-kawaii-craft-supplies\" target=\"_blank\" title=\"Clear Film (10 pieces)\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e), cut the clear plastic sheet big enough to cover the hole but smaller than the resin piece, glue it with UV resin.\u003c\/p\u003e\n\u003cp\u003e4. Apply another layer of resin on top of the clear plastic sheet to secure it.\u003c\/p\u003e\n\u003cp\u003e5. (Optional) Add baby oil or shaker oil or mixture of distilled water and clear glue into the piece through the hole (normally you can find it at the bottom part of the mold) with syringe.\u003c\/p\u003e\n\u003cp\u003e6. Seal the hole with UV resin. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMeasurement\u003c\/span\u003e: approx. 3.9cm (W) x 4.7cm (L) \/ 1.54\" (W) x 1.85\" (L)\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530248257,"title":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458","handle":"lady-bug-17mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-sculpey-casting-resin-epoxy-fondant-gum-paste-md458","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:50:00-11:00","created_at":"2016-03-26T01:50:37-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["animal mold","cabochon mold","cute mold","deco mold","decoden mold","decoration mold","embellishment","kawaii deco mold","kawaii mold","Paper","paper clay mold","plaster mold","polymer clay mold","Scrapbooking","Supplies","topper mold"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943572033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD458","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458","public_title":null,"options":["Default Title"],"price":475,"weight":10,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","options":["Title"],"media":[{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503714353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757135.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503747121,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757170.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503779889,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757252.jpeg?v=1517639994","width":600},{"alt":"Lady Bug (17mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Sculpey Casting Resin Epoxy Fondant Gum Paste) MD458 - MiniatureSweet","id":107503812657,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.188757309.jpeg?v=1517639994","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.3cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: approx. 1.3cm (W) x 1.6cm (H)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$3.95 USD
{"id":5530240577,"title":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412","handle":"lady-bug-beetle-16mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-premo-resin-epoxy-wax-gum-paste-fondant-md412","description":"\u003cp\u003e★Measurement: approx. 1.3cm (W) x 1.6cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:48:00-11:00","created_at":"2016-03-26T01:48:48-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["animal mold","beads mold","butterfly mold","cabochon mold","cell phone deco mold","deco mold","decoden mold","decoration mold","dragonfly mold","embellishment mold","Handmade","insect mold","kawaii mold","Scrapbooking","sculpey mold","Supplies"],"price":395,"price_min":395,"price_max":395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943544769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD412","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412","public_title":null,"options":["Default Title"],"price":395,"weight":8,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570127.jpeg?v=1517640015","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570117.jpeg?v=1517640015","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552464.jpeg?v=1517640015","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552468.jpeg?v=1517640015","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570147.jpeg?v=1517640015"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570127.jpeg?v=1517640015","options":["Title"],"media":[{"alt":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412 - MiniatureSweet","id":107497586737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570127.jpeg?v=1517640015"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570127.jpeg?v=1517640015","width":600},{"alt":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412 - MiniatureSweet","id":107497619505,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570117.jpeg?v=1517640015"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570117.jpeg?v=1517640015","width":600},{"alt":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412 - MiniatureSweet","id":107497652273,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552464.jpeg?v=1517640015"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552464.jpeg?v=1517640015","width":600},{"alt":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412 - MiniatureSweet","id":107497685041,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552468.jpeg?v=1517640015"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237552468.jpeg?v=1517640015","width":600},{"alt":"Lady Bug \/ Beetle (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay Fimo Premo Resin Epoxy Wax Gum Paste Fondant) MD412 - MiniatureSweet","id":107497717809,"position":5,"preview_image":{"aspect_ratio":1.167,"height":514,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570147.jpeg?v=1517640015"},"aspect_ratio":1.167,"height":514,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.237570147.jpeg?v=1517640015","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.3cm (W) x 1.6cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii bear silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin / epoxy...
$2.49 USD
{"id":10112912705,"title":"Large Bear Flexible Mold | Soft Resin Mold | Kawaii Animal Mold | Decoden Cabochon DIY | Epoxy Resin Supplies (41mm x 54mm)","handle":"large-bear-flexible-mold-soft-resin-mold-kawaii-animal-mold-decoden-cabochon-diy-epoxy-resin-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii bear silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin \/ epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.1cm (W) x 5.4cm (L) \/ 1.61\" (W) x 2.13\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If the clay you use is very soft \/ sticky, the clay may not be pop out easily, in this case, you can put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop it out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-14T23:47:00-11:00","created_at":"2017-09-04T22:39:55-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","bear mold","cabochon mold","Clear Mold","decoden supplies","Epoxy Resin Mold","Flexible Mold","kawaii mold","resin mold","resin mould","silicone mold","soft mold","UV resin mold"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37666134913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1139","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Bear Flexible Mold | Soft Resin Mold | Kawaii Animal Mold | Decoden Cabochon DIY | Epoxy Resin Supplies (41mm x 54mm)","public_title":null,"options":["Default Title"],"price":249,"weight":31,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139.jpg?v=1517671022","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139-02.jpg?v=1517671022"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139.jpg?v=1517671022","options":["Title"],"media":[{"alt":"Large Bear Flexible Mold | Soft Resin Mold | Kawaii Animal Mold | Decoden Cabochon DIY | Epoxy Resin Supplies (41mm x 54mm) - MiniatureSweet","id":396404359217,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139.jpg?v=1517671022"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139.jpg?v=1517671022","width":600},{"alt":"Large Bear Flexible Mold | Soft Resin Mold | Kawaii Animal Mold | Decoden Cabochon DIY | Epoxy Resin Supplies (41mm x 54mm) - MiniatureSweet","id":396404326449,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139-02.jpg?v=1517671022"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1139-02.jpg?v=1517671022","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eKawaii bear silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for UV resin \/ epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.1cm (W) x 5.4cm (L) \/ 1.61\" (W) x 2.13\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If the clay you use is very soft \/ sticky, the clay may not be pop out easily, in this case, you can put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop it out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Beautiful goldfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$2.39 USD
{"id":1481561243697,"title":"Large Goldfish Clear Mold for UV Resin | Fish Cabochon Mold | Epoxy Resin Craft Supplies | Resin Embellishment DIY (47mm x 45mm)","handle":"large-goldfish-clear-mold-for-uv-resin-fish-cabochon-mold-epoxy-resin-craft-supplies-resin-embellishment-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful goldfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.7cm (W) x 4.5cm (L) \/ 1.85\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-10-15T04:16:15-11:00","created_at":"2018-10-06T22:50:55-11:00","vendor":"MiniatureSweet","type":"Fish Mold","tags":["asian","cabochon mold","Clear Mold","embellishment mold","epoxy resin","flexible mold","gold fish mold","goldfish mold","kawaii crafts","kawaii mold","Koi pond","oriental","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":239,"price_min":239,"price_max":239,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13601606729777,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2072A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Goldfish Clear Mold for UV Resin | Fish Cabochon Mold | Epoxy Resin Craft Supplies | Resin Embellishment DIY (47mm x 45mm)","public_title":null,"options":["Default Title"],"price":239,"weight":35,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_8a8adb14-2ba7-4384-8a50-c8163eade8a4.jpg?v=1538920525","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_bf4423fb-c31f-4c0c-96cc-98518af49b0a.jpg?v=1538920525"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_8a8adb14-2ba7-4384-8a50-c8163eade8a4.jpg?v=1538920525","options":["Title"],"media":[{"alt":"Large Goldfish Clear Mold for UV Resin | Fish Cabochon Mold | Epoxy Resin Craft Supplies | Resin Embellishment DIY (47mm x 45mm) - MiniatureSweet","id":2654435999879,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_8a8adb14-2ba7-4384-8a50-c8163eade8a4.jpg?v=1538920525"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_8a8adb14-2ba7-4384-8a50-c8163eade8a4.jpg?v=1538920525","width":600},{"alt":"Large Goldfish Clear Mold for UV Resin | Fish Cabochon Mold | Epoxy Resin Craft Supplies | Resin Embellishment DIY (47mm x 45mm) - MiniatureSweet","id":2654436032647,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_bf4423fb-c31f-4c0c-96cc-98518af49b0a.jpg?v=1538920525"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_bf4423fb-c31f-4c0c-96cc-98518af49b0a.jpg?v=1538920525","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful goldfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.7cm (W) x 4.5cm (L) \/ 1.85\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Big heart silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry,...
$3.99 USD
{"id":792239964209,"title":"Large Heart Silicone Mold | Heart Coaster Mold | Clear Soft Mould for UV Resin | Epoxy Resin Supplies | Valentine's Day Decor (102mm x 86mm)","handle":"large-heart-silicone-mold-heart-coaster-mold-clear-soft-mould-for-uv-resin-epoxy-resin-supplies-valentines-day-decor","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBig heart silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10.2cm (W) x 8.6cm (L) \/ 4.02\" (W) x 3.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-07-04T18:06:23-11:00","created_at":"2018-07-04T14:15:50-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Coaster Mold","tags":["big heart","cabochon mold","Clear Mold","coaster mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","heart coaster","heart mold","kawaii crafts","kawaii mold","large heart","love","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin","valentine's day","wedding"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8936591523889,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1207","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Heart Silicone Mold | Heart Coaster Mold | Clear Soft Mould for UV Resin | Epoxy Resin Supplies | Valentine's Day Decor (102mm x 86mm)","public_title":null,"options":["Default Title"],"price":399,"weight":36,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_80793ca1-df42-42ce-be90-4720eca1b1fe.jpg?v=1530775164"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_80793ca1-df42-42ce-be90-4720eca1b1fe.jpg?v=1530775164","options":["Title"],"media":[{"alt":"Large Heart Silicone Mold | Heart Coaster Mold | Clear Soft Mould for UV Resin | Epoxy Resin Supplies | Valentine's Day Decor (102mm x 86mm) - MiniatureSweet","id":2596248191111,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_80793ca1-df42-42ce-be90-4720eca1b1fe.jpg?v=1530775164"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_80793ca1-df42-42ce-be90-4720eca1b1fe.jpg?v=1530775164","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBig heart silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10.2cm (W) x 8.6cm (L) \/ 4.02\" (W) x 3.39\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Large mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$6.99 USD
{"id":1374705221681,"title":"Large Mermaid Tail Silicone Mold | Marine Life Soft Mold | Fish Tail Clear Mould for UV Resin Crafts | Kawaii Craft Supplies (125mm x 90mm)","handle":"large-mermaid-tail-silicone-mold-marine-life-soft-mold-fish-tail-clear-mould-for-uv-resin-crafts-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 12.5m (W) x 9cm (L) \/ 4.92\" (W) x 3.54\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-07-29T16:01:53-11:00","created_at":"2018-07-29T15:53:42-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Fish Mold","tags":["beach","cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","fairy tale","fairytale","fish tail mold","flexible mold","kawaii crafts","kawaii mold","marine life","mermaid princess","mermaid tail mold","Nautical","ocean","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea","Silicone Mold","soft mold","uv resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12380722200625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3004A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Mermaid Tail Silicone Mold | Marine Life Soft Mold | Fish Tail Clear Mould for UV Resin Crafts | Kawaii Craft Supplies (125mm x 90mm)","public_title":null,"options":["Default Title"],"price":699,"weight":145,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_5683f112-c006-40e0-8394-8df30f94f412.jpg?v=1532939085","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_808c6304-a4e7-434c-b274-3f20b922a8c7.jpg?v=1532939086"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_5683f112-c006-40e0-8394-8df30f94f412.jpg?v=1532939085","options":["Title"],"media":[{"alt":"Large Mermaid Tail Silicone Mold | Marine Life Soft Mold | Fish Tail Clear Mould for UV Resin Crafts | Kawaii Craft Supplies (125mm x 90mm) - MiniatureSweet","id":2628130340999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_5683f112-c006-40e0-8394-8df30f94f412.jpg?v=1532939085"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015-02_5683f112-c006-40e0-8394-8df30f94f412.jpg?v=1532939085","width":600},{"alt":"Large Mermaid Tail Silicone Mold | Marine Life Soft Mold | Fish Tail Clear Mould for UV Resin Crafts | Kawaii Craft Supplies (125mm x 90mm) - MiniatureSweet","id":2628130373767,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_808c6304-a4e7-434c-b274-3f20b922a8c7.jpg?v=1532939086"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/015_808c6304-a4e7-434c-b274-3f20b922a8c7.jpg?v=1532939086","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 12.5m (W) x 9cm (L) \/ 4.92\" (W) x 3.54\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Big puffy cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$5.99 USD
{"id":1481558360113,"title":"Large Puffy Cloud Silicone Mold | Kawaii Epoxy Resin Mold | Clear Soft Mould for UV Resin Art | Cute Paperweight DIY (66mm x 47mm)","handle":"large-cloud-silicone-mold-kawaii-epoxy-resin-mold-clear-soft-mould-for-uv-resin-art-cute-paperweight-diy","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBig puffy cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.6cm (W) x 4.7cm (L) x 3.2cm (D) \/ 2.6\" (W) x 1.84\" (L) x 1.25\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-10-15T04:16:14-11:00","created_at":"2018-10-06T22:05:40-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["big cloud mold","cabochon mold","Clear Mold","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","large cloud mold","paperweight mold","puffy cloud mold","resin art","resin crafts","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13601592737841,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3030A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Puffy Cloud Silicone Mold | Kawaii Epoxy Resin Mold | Clear Soft Mould for UV Resin Art | Cute Paperweight DIY (66mm x 47mm)","public_title":null,"options":["Default Title"],"price":599,"weight":95,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_b05af54f-8a90-47e4-8acb-670e7efe1346.jpg?v=1538920526","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_d4f65c6b-afd2-477e-8c5c-5b2674604b7c.jpg?v=1538920526"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_b05af54f-8a90-47e4-8acb-670e7efe1346.jpg?v=1538920526","options":["Title"],"media":[{"alt":"Large Puffy Cloud Silicone Mold | Kawaii Epoxy Resin Mold | Clear Soft Mould for UV Resin Art | Cute Paperweight DIY (66mm x 47mm) - MiniatureSweet","id":2654435442823,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_b05af54f-8a90-47e4-8acb-670e7efe1346.jpg?v=1538920526"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_b05af54f-8a90-47e4-8acb-670e7efe1346.jpg?v=1538920526","width":600},{"alt":"Large Puffy Cloud Silicone Mold | Kawaii Epoxy Resin Mold | Clear Soft Mould for UV Resin Art | Cute Paperweight DIY (66mm x 47mm) - MiniatureSweet","id":2654435410055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_d4f65c6b-afd2-477e-8c5c-5b2674604b7c.jpg?v=1538920526"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010-02_d4f65c6b-afd2-477e-8c5c-5b2674604b7c.jpg?v=1538920526","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBig puffy cloud silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6.6cm (W) x 4.7cm (L) x 3.2cm (D) \/ 2.6\" (W) x 1.84\" (L) x 1.25\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Large royal carriage silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin...
$6.99 USD
{"id":1374703091761,"title":"Large Royal Carriage Silicone Mold | Fairytale Embellishment Mold | Clear Soft Mould for UV Resin | Epoxy Resin Mold (135mm x 80mm)","handle":"large-royal-carriage-silicone-mold-fairytale-embellishment-mold-clear-soft-mould-for-uv-resin-epoxy-resin-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge royal carriage silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 13.5cm (W) x 8cm (L) \/ 5.31\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-07-29T16:01:53-11:00","created_at":"2018-07-29T14:58:33-11:00","vendor":"MiniatureSweet","type":"Fairytale Mold","tags":["cabochon mold","carriage mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","fairy tale","fairytale","flexible mold","kawaii crafts","kawaii mold","palace carriage","princess","Pumpkin Carriage","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","royal carriage","Silicone Mold","soft mold","uv resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12380712960049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3014A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Royal Carriage Silicone Mold | Fairytale Embellishment Mold | Clear Soft Mould for UV Resin | Epoxy Resin Mold (135mm x 80mm)","public_title":null,"options":["Default Title"],"price":699,"weight":134,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013-02_7a745ca7-bfbf-4ebc-bf67-d16290a61aa0.jpg?v=1532939086","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_1f61aaf6-9c5d-45b9-9f85-20a661727d54.jpg?v=1532939087"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013-02_7a745ca7-bfbf-4ebc-bf67-d16290a61aa0.jpg?v=1532939086","options":["Title"],"media":[{"alt":"Large Royal Carriage Silicone Mold | Fairytale Embellishment Mold | Clear Soft Mould for UV Resin | Epoxy Resin Mold (135mm x 80mm) - MiniatureSweet","id":2628121559175,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013-02_7a745ca7-bfbf-4ebc-bf67-d16290a61aa0.jpg?v=1532939086"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013-02_7a745ca7-bfbf-4ebc-bf67-d16290a61aa0.jpg?v=1532939086","width":600},{"alt":"Large Royal Carriage Silicone Mold | Fairytale Embellishment Mold | Clear Soft Mould for UV Resin | Epoxy Resin Mold (135mm x 80mm) - MiniatureSweet","id":2628121591943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_1f61aaf6-9c5d-45b9-9f85-20a661727d54.jpg?v=1532939087"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/013_1f61aaf6-9c5d-45b9-9f85-20a661727d54.jpg?v=1532939087","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge royal carriage silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 13.5cm (W) x 8cm (L) \/ 5.31\" (W) x 3.15\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Large seashell silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry,...
$3.99 USD
{"id":1374572347441,"title":"Large Seashell Silicone Mold | Marine Life Mold | Kawaii Resin Mould | Beach Decor | UV Resin Soft Mold (50mm x 48mm)","handle":"large-seashell-silicone-mold-marine-life-mold-kawaii-resin-mould-beach-decor-uv-resin-soft-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge seashell silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 4.8cm (L) \/ 1.97\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-07-29T14:20:59-11:00","created_at":"2018-07-28T21:55:35-11:00","vendor":"MiniatureSweet","type":"Nautical Mold","tags":["beach decoration","cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","marine life","Nautical","ocean","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea shell mold","Seashell Mold","Silicone Mold","soft mold","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12380311060529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1221","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Large Seashell Silicone Mold | Marine Life Mold | Kawaii Resin Mould | Beach Decor | UV Resin Soft Mold (50mm x 48mm)","public_title":null,"options":["Default Title"],"price":399,"weight":57,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_47dfe606-e612-46ba-825d-e7a44644eb88.jpg?v=1532855854","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_450fdf8a-c7ee-4ed8-b20a-3f3f71150a06.jpg?v=1532855854"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_47dfe606-e612-46ba-825d-e7a44644eb88.jpg?v=1532855854","options":["Title"],"media":[{"alt":"Large Seashell Silicone Mold | Marine Life Mold | Kawaii Resin Mould | Beach Decor | UV Resin Soft Mold (50mm x 48mm) - MiniatureSweet","id":2628065034375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_47dfe606-e612-46ba-825d-e7a44644eb88.jpg?v=1532855854"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_47dfe606-e612-46ba-825d-e7a44644eb88.jpg?v=1532855854","width":600},{"alt":"Large Seashell Silicone Mold | Marine Life Mold | Kawaii Resin Mould | Beach Decor | UV Resin Soft Mold (50mm x 48mm) - MiniatureSweet","id":2628065067143,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_450fdf8a-c7ee-4ed8-b20a-3f3f71150a06.jpg?v=1532855854"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_450fdf8a-c7ee-4ed8-b20a-3f3f71150a06.jpg?v=1532855854","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLarge seashell silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 4.8cm (L) \/ 1.97\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii shaker mold in large square shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter,...
Sold Out
{"id":10128782145,"title":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm)","handle":"large-square-shaker-mold-liquid-coaster-mold-making-waterfall-resin-piece-diy-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in large square shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10cm or 3.94\" (W)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-07-24T22:36:44-11:00","created_at":"2017-09-07T19:50:38-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Shaker Mold, Coaster Mold","tags":["bezel mold","cabochon mold","coaster mold","epoxy resin","flexible mold","geometric mold","geometry mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","resin art","resin crafts","resin mold","Resin Mould","resin piece","round square","rounded square","shaker charm","shaker mold","Silicone Mold","soft mold","Square Mold","UV resin","waterfall charm"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37736372417,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2138","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm)","public_title":null,"options":["Default Title"],"price":599,"weight":96,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138-02.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_a50d55e1-27a2-44bc-87f3-fa7c36728383.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_af59f203-9025-40d6-acd2-37ae302e320c.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_7c7c0218-f44e-400c-b876-513ba8015541.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_3b0fe04e-2d54-4314-846f-3ea5a5b53e51.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_e0506ac6-504f-4a05-9343-0ec0a9ad9821.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_386a2a4c-cbb9-46da-b613-ded6608fb787.jpg?v=1517671051","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_1c139cfc-d3d3-4f7a-a1ed-c32345d83526.jpg?v=1517671051"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138.jpg?v=1517671051","options":["Title"],"media":[{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322518577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322551345,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138-02.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2138-02.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322584113,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_a50d55e1-27a2-44bc-87f3-fa7c36728383.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_a50d55e1-27a2-44bc-87f3-fa7c36728383.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322616881,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_af59f203-9025-40d6-acd2-37ae302e320c.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_af59f203-9025-40d6-acd2-37ae302e320c.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322649649,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_7c7c0218-f44e-400c-b876-513ba8015541.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_7c7c0218-f44e-400c-b876-513ba8015541.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322682417,"position":6,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_3b0fe04e-2d54-4314-846f-3ea5a5b53e51.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_3b0fe04e-2d54-4314-846f-3ea5a5b53e51.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322715185,"position":7,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_e0506ac6-504f-4a05-9343-0ec0a9ad9821.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_e0506ac6-504f-4a05-9343-0ec0a9ad9821.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322747953,"position":8,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_386a2a4c-cbb9-46da-b613-ded6608fb787.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_386a2a4c-cbb9-46da-b613-ded6608fb787.jpg?v=1517671051","width":600},{"alt":"Large Square Shaker Mold | Liquid Coaster Mold Making | Waterfall Resin Piece DIY | Kawaii Craft Supplies (100mm) - MiniatureSweet","id":397322780721,"position":9,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_1c139cfc-d3d3-4f7a-a1ed-c32345d83526.jpg?v=1517671051"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_1c139cfc-d3d3-4f7a-a1ed-c32345d83526.jpg?v=1517671051","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in large square shape. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10cm or 3.94\" (W)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}
★Measurement: Approx. 1.1cm (L) x 0.8cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530262913,"title":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556","handle":"leave-leaf-11mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-resin-epoxy-wax-soap-gum-paste-fondant-md556","description":"\u003cp\u003e★Measurement: Approx. 1.1cm (L) x 0.8cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:54:00-11:00","created_at":"2016-03-26T01:54:02-11:00","vendor":"MiniatureSweet","type":"Leaf Mold","tags":["cabochon mold","cute mold","daisy mold","deco mold","decoden supplies","earrings mold","floral mold","Handmade","kawaii mold","polymer clay mold","premo mold","rose mold","Scrapbooking","sculpey mold","Supplies","topper mold"],"price":395,"price_min":395,"price_max":395,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943618113,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD556","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556","public_title":null,"options":["Default Title"],"price":395,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013137.jpeg?v=1517640404","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013138.jpeg?v=1517640404","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013139.jpeg?v=1517640404","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013140.jpeg?v=1517640404"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013137.jpeg?v=1517640404","options":["Title"],"media":[{"alt":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556 - MiniatureSweet","id":107516952625,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013137.jpeg?v=1517640404"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013137.jpeg?v=1517640404","width":600},{"alt":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556 - MiniatureSweet","id":107516985393,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013138.jpeg?v=1517640404"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013138.jpeg?v=1517640404","width":600},{"alt":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556 - MiniatureSweet","id":107517018161,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013139.jpeg?v=1517640404"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013139.jpeg?v=1517640404","width":600},{"alt":"Leave \/ Leaf (11mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Epoxy, Wax, Soap, Gum Paste, Fondant) MD556 - MiniatureSweet","id":107517050929,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013140.jpeg?v=1517640404"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191013140.jpeg?v=1517640404","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.1cm (L) x 0.8cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: approx. 1.8cm (L) x 1.3cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.75 USD
{"id":5530263105,"title":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557","handle":"leave-leaf-18mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resins-gum-paste-fondant-md557","description":"\u003cp\u003e★Measurement: approx. 1.8cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:54:00-11:00","created_at":"2016-03-26T01:54:05-11:00","vendor":"MiniatureSweet","type":"Leaf Mold","tags":["cabochon mold","charms mold","cupcake mold","daisy mold","deco mold","decoden mold","floral mold","flower mold","Handmade","jewelry mold","kawaii mold","polymer clay mold","rose mold","Scrapbooking","sculpey mold","Supplies"],"price":475,"price_min":475,"price_max":475,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943618817,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD557","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557","public_title":null,"options":["Default Title"],"price":475,"weight":7,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039547.jpeg?v=1517640445","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039548.jpeg?v=1517640445","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039549.jpeg?v=1517640445","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039550.jpeg?v=1517640445"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039547.jpeg?v=1517640445","options":["Title"],"media":[{"alt":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557 - MiniatureSweet","id":107517083697,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039547.jpeg?v=1517640445"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039547.jpeg?v=1517640445","width":600},{"alt":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557 - MiniatureSweet","id":107517116465,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039548.jpeg?v=1517640445"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039548.jpeg?v=1517640445","width":600},{"alt":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557 - MiniatureSweet","id":107517149233,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039549.jpeg?v=1517640445"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039549.jpeg?v=1517640445","width":600},{"alt":"Leave \/ Leaf (18mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD557 - MiniatureSweet","id":107517182001,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039550.jpeg?v=1517640445"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.192039550.jpeg?v=1517640445","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 1.8cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 2.1cm (L) x 1.7cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530263169,"title":"Leave \/ Leaf (21mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant, Wax) MD558","handle":"leave-leaf-21mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-wax-md558","description":"\u003cp\u003e★Measurement: Approx. 2.1cm (L) x 1.7cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:54:00-11:00","created_at":"2016-03-26T01:54:06-11:00","vendor":"MiniatureSweet","type":"Leaf Mold","tags":["bead mold","cabochon mold","cupcake mold","cute mold","daisy mold","deco mold","decoden supplies","earrings mold","epoxy mold","floral mold","Handmade","kawaii mold","polymer clay mold","rose mold","Scrapbooking","Supplies"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943618881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD558","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Leave \/ Leaf (21mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant, Wax) MD558","public_title":null,"options":["Default Title"],"price":495,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510053.jpeg?v=1517640425","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510073.jpeg?v=1517640425"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510053.jpeg?v=1517640425","options":["Title"],"media":[{"alt":"Leave \/ Leaf (21mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant, Wax) MD558 - MiniatureSweet","id":107517214769,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510053.jpeg?v=1517640425"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510053.jpeg?v=1517640425","width":600},{"alt":"Leave \/ Leaf (21mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant, Wax) MD558 - MiniatureSweet","id":107517247537,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510073.jpeg?v=1517640425"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.236510073.jpeg?v=1517640425","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.1cm (L) x 1.7cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.3cm (L) x 1.2cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530320001,"title":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802","handle":"leave-leaf-13mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resins-wax-soap-gum-paste-fondant-md802","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (L) x 1.2cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T02:03:00-11:00","created_at":"2016-03-26T02:03:15-11:00","vendor":"MiniatureSweet","type":"Leaf Mold","tags":["cabochon mold","cute mold","daisy mold","deco mold","decoden mold","earrings mold","floral mold","Handmade","kawaii mold","polymer clay mold","resin mold","rose mold","Scrapbooking","sculpey mold","spring mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943891201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD802","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802","public_title":null,"options":["Default Title"],"price":425,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156439.jpeg?v=1517640447","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156451.jpeg?v=1517640447","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156101.jpeg?v=1517640447","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156103.jpeg?v=1517640447"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156439.jpeg?v=1517640447","options":["Title"],"media":[{"alt":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802 - MiniatureSweet","id":107551162417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156439.jpeg?v=1517640447"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156439.jpeg?v=1517640447","width":600},{"alt":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802 - MiniatureSweet","id":107551195185,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156451.jpeg?v=1517640447"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156451.jpeg?v=1517640447","width":600},{"alt":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802 - MiniatureSweet","id":107551227953,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156101.jpeg?v=1517640447"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156101.jpeg?v=1517640447","width":600},{"alt":"Leave Leaf (13mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Wax, Soap, Gum Paste, Fondant) MD802 - MiniatureSweet","id":107551260721,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156103.jpeg?v=1517640447"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.244156103.jpeg?v=1517640447","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (L) x 1.2cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.6cm (W) x 1.6cm (H)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.95 USD
{"id":5530242625,"title":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421","handle":"lion-16mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resins-epoxy-wax-soap-gum-paste-fondant-md421","description":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 1.6cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:49:00-11:00","created_at":"2016-03-26T01:49:19-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","beads mold","cabochon mold","cell phone deco mold","deco mold","decoden mold","embellishment mold","Handmade","kawaii mold","Polymer Clay","polymer clay mold","premo mold","sculpey mold","Supplies","topper mold","zoo lion mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943552385,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD421","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421","public_title":null,"options":["Default Title"],"price":495,"weight":7,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780839.jpeg?v=1517640658","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780875.jpeg?v=1517640658","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780927.jpeg?v=1517640658","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780966.jpeg?v=1517640658"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780839.jpeg?v=1517640658","options":["Title"],"media":[{"alt":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421 - MiniatureSweet","id":107498930225,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780839.jpeg?v=1517640658"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780839.jpeg?v=1517640658","width":600},{"alt":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421 - MiniatureSweet","id":107498962993,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780875.jpeg?v=1517640658"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780875.jpeg?v=1517640658","width":600},{"alt":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421 - MiniatureSweet","id":107498995761,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780927.jpeg?v=1517640658"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780927.jpeg?v=1517640658","width":600},{"alt":"Lion (16mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, Soap, Gum Paste, Fondant) MD421 - MiniatureSweet","id":107499028529,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780966.jpeg?v=1517640658"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.191780966.jpeg?v=1517640658","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.6cm (W) x 1.6cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Kawaii shaker mold in the shape of Star of David / hexagram. Perfect for shaker charm, waterfall charm making. Just assemble all the components made...
$3.99 USD
{"id":9940809089,"title":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm)","handle":"liquid-shaker-mold-star-of-david-bezel-mold-for-waterfall-shaker-charm-making-kawaii-epoxy-resin-crafts-decoden-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of Star of David \/ hexagram. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 5.9cm (L) \/ 1.97\" (W) x 2.32\" (L)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-07-24T22:36:44-11:00","created_at":"2017-07-24T22:57:45-11:00","vendor":"MiniatureSweet","type":"Star Mold, Shape Mold, Shaker Mold","tags":["bezel mold","cabochon mold","cell phone decoration","decoden supplies","epoxy resin","flexible mold","geometric mold","geometry mold","hexagram mold","hollow mold","kawaii crafts","kawaii mold","liquid charm","liquid shaker","phone case deco","resin art","resin crafts","resin mold","Resin Mould","resin piece","sexagram mold","shaker charm","shaker mold","Silicone Mold","soft mold","star mold","star of david mold","UV resin","waterfall charm"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36765575105,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2095","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm)","public_title":null,"options":["Default Title"],"price":399,"weight":31,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095-02.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_ab9f3e03-6076-48de-9d68-df9414497631.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d3989567-b276-4fe0-b606-48746f4c9878.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_35cba3b6-fd52-41c0-a096-4859ce9b0c46.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_935a65a5-b1ff-478d-bd96-703d7cc9cfb0.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_efa7df33-035d-4e2c-b76c-cd7bc2865130.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_2dba42ac-84e4-4284-a5e4-2743200dd8cf.jpg?v=1517670359","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_3c2c248d-817a-49de-bb5d-231e3d412af4.jpg?v=1517670359"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095.jpg?v=1517670359","options":["Title"],"media":[{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364074827825,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364074795057,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095-02.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2095-02.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364076302385,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_ab9f3e03-6076-48de-9d68-df9414497631.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_01_ab9f3e03-6076-48de-9d68-df9414497631.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364076269617,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d3989567-b276-4fe0-b606-48746f4c9878.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_02_d3989567-b276-4fe0-b606-48746f4c9878.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364076236849,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_35cba3b6-fd52-41c0-a096-4859ce9b0c46.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_03_35cba3b6-fd52-41c0-a096-4859ce9b0c46.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364076204081,"position":6,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_935a65a5-b1ff-478d-bd96-703d7cc9cfb0.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_04_935a65a5-b1ff-478d-bd96-703d7cc9cfb0.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364075843633,"position":7,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_efa7df33-035d-4e2c-b76c-cd7bc2865130.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_05_efa7df33-035d-4e2c-b76c-cd7bc2865130.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364075810865,"position":8,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_2dba42ac-84e4-4284-a5e4-2743200dd8cf.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_06_2dba42ac-84e4-4284-a5e4-2743200dd8cf.jpg?v=1517670359","width":600},{"alt":"Liquid Shaker Mold | Star of David Bezel Mold for Waterfall Shaker Charm Making | Kawaii Epoxy Resin Crafts | Decoden Supplies (50mm x 59mm) - MiniatureSweet","id":364075778097,"position":9,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_3c2c248d-817a-49de-bb5d-231e3d412af4.jpg?v=1517670359"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2093_to_MD2101_-_shaker_mold_-_07_3c2c248d-817a-49de-bb5d-231e3d412af4.jpg?v=1517670359","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii shaker mold in the shape of Star of David \/ hexagram. Perfect for shaker charm, waterfall charm making. Just assemble all the components made with the molds, add glitter, confetti, embellishments, floating charms, rhinestones, baby oil (if you want to make waterfall effect) or anything colorful, kawaii, sparkle!\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 5.9cm (L) \/ 1.97\" (W) x 2.32\" (L)\u003c\/p\u003e\n\u003cp\u003e★ You need to use \u003ca href=\"https:\/\/goo.gl\/wtu5Bx\" target=\"_blank\" title=\"UV Resin\" rel=\"noopener noreferrer\"\u003eUV resin\u003c\/a\u003e or \u003ca href=\"https:\/\/goo.gl\/aNCXPw\" target=\"_blank\" title=\"UV glue\" rel=\"noopener noreferrer\"\u003eUV glue\u003c\/a\u003e to glue all the components together.\u003c\/p\u003e\n\u003cp\u003e★ No releasing agent is needed, finished work can be easily pop out easily from the mold.\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Hpx909Z1B88\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1172\/4574\/files\/MD2093-all-00_c420afb3-4b4d-4396-8067-e4d5ba2c0a78.jpg?v=1500975749\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}
★Measurement: approx. 2.5cm (W) x 2.4cm (H)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$5.45 USD
{"id":5530259329,"title":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535","handle":"lolita-umbrella-w-bow-25mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-resin-wax-soap-gum-paste-fondant-md535","description":"\u003cp\u003e★Measurement: approx. 2.5cm (W) x 2.4cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:53:00-11:00","created_at":"2016-03-26T01:53:06-11:00","vendor":"MiniatureSweet","type":"Fashion Accessory Mold","tags":["cabochon mold","charm mold","deco mold","decoden mold","decoration mold","embellishment mold","Handmade","jewelry mold","kawaii mold","lolita deco mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","Supplies","victorian mold"],"price":545,"price_min":545,"price_max":545,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943607233,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD535","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535","public_title":null,"options":["Default Title"],"price":545,"weight":15,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248729183.jpeg?v=1517640841","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248696800.jpeg?v=1517640841","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915590_f9454534-ed6a-4fa0-af1e-6c3cfc60b645.jpeg?v=1517640841","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915591_0dacf0d0-b83a-4b10-b025-ad02d302e21d.jpeg?v=1517640841"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248729183.jpeg?v=1517640841","options":["Title"],"media":[{"alt":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535 - MiniatureSweet","id":107514134577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248729183.jpeg?v=1517640841"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248729183.jpeg?v=1517640841","width":600},{"alt":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535 - MiniatureSweet","id":107514167345,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248696800.jpeg?v=1517640841"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248696800.jpeg?v=1517640841","width":600},{"alt":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535 - MiniatureSweet","id":107514200113,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915590_f9454534-ed6a-4fa0-af1e-6c3cfc60b645.jpeg?v=1517640841"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915590_f9454534-ed6a-4fa0-af1e-6c3cfc60b645.jpeg?v=1517640841","width":600},{"alt":"Lolita Umbrella w\/ Bow (25mm) Silicone Flexible Push Mold Jewelry, Charms, Cupcake (Clay, Fimo, Resin, Wax, Soap, Gum Paste, Fondant) MD535 - MiniatureSweet","id":107514232881,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915591_0dacf0d0-b83a-4b10-b025-ad02d302e21d.jpeg?v=1517640841"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193915591_0dacf0d0-b83a-4b10-b025-ad02d302e21d.jpeg?v=1517640841","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.5cm (W) x 2.4cm (H)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 0.9cm (W) x 1.5cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.25 USD
{"id":5530231105,"title":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349","handle":"lollipop-with-bow-15mm-silicone-mold-flexible-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md349","description":"\u003cp\u003e★Measurement: Approx. 0.9cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:45:00-11:00","created_at":"2016-03-26T01:45:38-11:00","vendor":"MiniatureSweet","type":"Candy Mold","tags":["cabochon mold","candy sucker mold","cupcake topper mold","decoden mold","fake food mold","flexible mold","Handmade","kawaii mold","lollipop mold","lolly candy mold","Polymer Clay","polymer clay mold","sculpey mold","silicone mold","sticky pop mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943510785,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD349","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349","public_title":null,"options":["Default Title"],"price":425,"weight":7,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311280.jpeg?v=1517640904","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311281.jpeg?v=1517640904","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272549376.jpeg?v=1517640904","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311282.jpeg?v=1517640904","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311283.jpeg?v=1517640904"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311280.jpeg?v=1517640904","options":["Title"],"media":[{"alt":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349 - MiniatureSweet","id":107488084017,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311280.jpeg?v=1517640904"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311280.jpeg?v=1517640904","width":600},{"alt":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349 - MiniatureSweet","id":107488116785,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311281.jpeg?v=1517640904"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311281.jpeg?v=1517640904","width":600},{"alt":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349 - MiniatureSweet","id":107488149553,"position":3,"preview_image":{"aspect_ratio":1.218,"height":1000,"width":1218,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272549376.jpeg?v=1517640904"},"aspect_ratio":1.218,"height":1000,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.272549376.jpeg?v=1517640904","width":1218},{"alt":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349 - MiniatureSweet","id":107488182321,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311282.jpeg?v=1517640904"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311282.jpeg?v=1517640904","width":600},{"alt":"Lollipop with Bow (15mm) Silicone Mold Flexible Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD349 - MiniatureSweet","id":107488215089,"position":5,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311283.jpeg?v=1517640904"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.189311283.jpeg?v=1517640904","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 0.9cm (W) x 1.5cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: approx. 2.2cm (L) x 1.3cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.95 USD
{"id":5530213761,"title":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160","handle":"long-butter-cookie-biscuit-mold-22mm-silicone-flexible-push-mold-miniature-food-cupcake-jewelry-charms-clay-fimo-fondant-md160","description":"\u003cp\u003e★Measurement: approx. 2.2cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:37:00-11:00","created_at":"2016-03-26T01:37:02-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["bakery mold","cabochon mold","deco mold","decoden mold","dollhouse mold","embellishment mold","fake food mold","Handmade","kawaii mold","Polymer Clay","polymer clay mold","premo mold","sculpey mold","shortbread mold","Supplies","sweets mold"],"price":495,"price_min":495,"price_max":495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943483265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD160","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249975123.jpeg?v=1517640935","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249941058.jpeg?v=1517640935","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_df22a251-25da-40bf-95ea-bcf5b8efc66a.jpeg?v=1517640935","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_af059b06-6325-4bcd-bfe5-20cce05ad724.jpeg?v=1517640935"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249975123.jpeg?v=1517640935","options":["Title"],"media":[{"alt":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160 - MiniatureSweet","id":107457839153,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249975123.jpeg?v=1517640935"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249975123.jpeg?v=1517640935","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160 - MiniatureSweet","id":107457871921,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249941058.jpeg?v=1517640935"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249941058.jpeg?v=1517640935","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160 - MiniatureSweet","id":107457904689,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_df22a251-25da-40bf-95ea-bcf5b8efc66a.jpeg?v=1517640935"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_df22a251-25da-40bf-95ea-bcf5b8efc66a.jpeg?v=1517640935","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (22mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD160 - MiniatureSweet","id":107457937457,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_af059b06-6325-4bcd-bfe5-20cce05ad724.jpeg?v=1517640935"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_af059b06-6325-4bcd-bfe5-20cce05ad724.jpeg?v=1517640935","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.2cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: approx. 2.3cm (L) x 1.3cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
Sold Out
{"id":5530213697,"title":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159","handle":"long-butter-cookie-biscuit-mold-23mm-silicone-flexible-push-mold-miniature-food-cupcake-jewelry-charms-clay-fimo-fondant-md159","description":"\u003cp\u003e★Measurement: approx. 2.3cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:36:00-11:00","created_at":"2016-03-26T01:36:59-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["bakery mold","cabochon mold","deco mold","decoden mold","dollhouse food mold","embellishment mold","fake food mold","Handmade","kawaii mold","polymer clay mold","premo mold","Scrapbooking","sculpey mold","shortbread mold","Supplies","sweets mold"],"price":495,"price_min":495,"price_max":495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943483201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD159","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159","public_title":null,"options":["Default Title"],"price":495,"weight":11,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940526.jpeg?v=1517640944","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940550.jpeg?v=1517640944","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988.jpeg?v=1517640944","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990.jpeg?v=1517640944"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940526.jpeg?v=1517640944","options":["Title"],"media":[{"alt":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159 - MiniatureSweet","id":107457708081,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940526.jpeg?v=1517640944"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940526.jpeg?v=1517640944","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159 - MiniatureSweet","id":107457740849,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940550.jpeg?v=1517640944"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249940550.jpeg?v=1517640944","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159 - MiniatureSweet","id":107457773617,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988.jpeg?v=1517640944"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988.jpeg?v=1517640944","width":600},{"alt":"Long Butter Cookie \/ Biscuit Mold (23mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo, Fondant) MD159 - MiniatureSweet","id":107457806385,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990.jpeg?v=1517640944"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990.jpeg?v=1517640944","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.3cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Long mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry,...
$1.89 USD
{"id":4169262694535,"title":"Long Mermaid Tail Silicone Mold | Kawaii Decoden Cabochon DIY | Fairytale Jewelry Making (43mm x 81mm)","handle":"long-mermaid-tail-silicone-mold-kawaii-decoden-cabochon-diy-fairytale-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3m (W) x 8.1cm (L) \/ 1.69\" (W) x 3.19\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:37:29-11:00","created_at":"2019-10-07T19:46:58-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Fish Mold","tags":["beach","cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","fairy tale","fairytale","fish tail mold","flexible mold","kawaii crafts","kawaii mold","marine life","mermaid princess","mermaid tail mold","Nautical","ocean","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea","Silicone Mold","soft mold","uv resin"],"price":189,"price_min":189,"price_max":189,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30301157425287,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD097A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Mermaid Tail Silicone Mold | Kawaii Decoden Cabochon DIY | Fairytale Jewelry Making (43mm x 81mm)","public_title":null,"options":["Default Title"],"price":189,"weight":21,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_5712dc61-5709-4406-939b-cbc3a6270cd2.jpg?v=1570625890","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-03_36629643-4ff0-4efc-b0c6-c5ec910e7a70.jpg?v=1570625890","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_0d4ffa0f-967e-42bb-aff5-d5ef783c627d.jpg?v=1570625891"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_5712dc61-5709-4406-939b-cbc3a6270cd2.jpg?v=1570625890","options":["Title"],"media":[{"alt":"Long Mermaid Tail Silicone Mold | Kawaii Decoden Cabochon DIY | Fairytale Jewelry Making (43mm x 81mm) - MiniatureSweet","id":3170219393159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_5712dc61-5709-4406-939b-cbc3a6270cd2.jpg?v=1570625890"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011_5712dc61-5709-4406-939b-cbc3a6270cd2.jpg?v=1570625890","width":600},{"alt":"Long Mermaid Tail Silicone Mold | Kawaii Decoden Cabochon DIY | Fairytale Jewelry Making (43mm x 81mm) - MiniatureSweet","id":3170219360391,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-03_36629643-4ff0-4efc-b0c6-c5ec910e7a70.jpg?v=1570625890"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-03_36629643-4ff0-4efc-b0c6-c5ec910e7a70.jpg?v=1570625890","width":600},{"alt":"Long Mermaid Tail Silicone Mold | Kawaii Decoden Cabochon DIY | Fairytale Jewelry Making (43mm x 81mm) - MiniatureSweet","id":3170219327623,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_0d4ffa0f-967e-42bb-aff5-d5ef783c627d.jpg?v=1570625891"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/011-02_0d4ffa0f-967e-42bb-aff5-d5ef783c627d.jpg?v=1570625891","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong mermaid tail silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3m (W) x 8.1cm (L) \/ 1.69\" (W) x 3.19\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Long rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...
Sold Out
{"id":9753626945,"title":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","handle":"long-rectangular-bar-mold-rectangle-charm-mold-clear-uv-resin-jewelry-mold-flexible-silicone-mould-epoxy-resin-art","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:57:05-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["bar pendant","cabochon mold","charm mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","long bar mold","pendant mold","rectangle","rectangle charm","rectangle mold","rectangular mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Shape Mold","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988833089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1125","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","public_title":null,"options":["Default Title"],"price":99,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","options":["Title"],"media":[{"alt":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm) - MiniatureSweet","id":326737002545,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
★Measurement: approx. 2.5cm (L) x 1.3cm (W)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.99 USD
{"id":5530213953,"title":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162","handle":"long-windmill-cookie-biscuit-mold-25mm-silicone-flexible-push-mold-miniature-food-cupcake-jewelry-charms-clay-fimo-md162","description":"\u003cp\u003e★Measurement: approx. 2.5cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:37:00-11:00","created_at":"2016-03-26T01:37:06-11:00","vendor":"MiniatureSweet","type":"Biscuit Mold","tags":["bakery mold","butter cookie mold","cabochon mold","deco mold","decoden mold","dollhouse food mold","embellishment mold","fake food mold","Handmade","kawaii mold","polymer clay mold","Scrapbooking","sculpey mold","shortbread mold","Supplies","sweets mold"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943483457,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD162","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162","public_title":null,"options":["Default Title"],"price":499,"weight":8,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938652.jpeg?v=1517640982","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938662.jpeg?v=1517640982","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_59c4d8bb-6509-4c0d-93cd-183e5c500ce3.jpeg?v=1517640982","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_74c89410-8caf-4cbd-aa65-21bbe5a19636.jpeg?v=1517640982"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938652.jpeg?v=1517640982","options":["Title"],"media":[{"alt":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162 - MiniatureSweet","id":107458232369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938652.jpeg?v=1517640982"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938652.jpeg?v=1517640982","width":600},{"alt":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162 - MiniatureSweet","id":107458265137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938662.jpeg?v=1517640982"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.249938662.jpeg?v=1517640982","width":600},{"alt":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162 - MiniatureSweet","id":107458297905,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_59c4d8bb-6509-4c0d-93cd-183e5c500ce3.jpeg?v=1517640982"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286988_59c4d8bb-6509-4c0d-93cd-183e5c500ce3.jpeg?v=1517640982","width":600},{"alt":"Long Windmill Cookie \/ Biscuit Mold (25mm) Silicone Flexible Push Mold - Miniature Food, Cupcake, Jewelry, Charms (Clay, Fimo) MD162 - MiniatureSweet","id":107458330673,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_74c89410-8caf-4cbd-aa65-21bbe5a19636.jpeg?v=1517640982"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235286990_74c89410-8caf-4cbd-aa65-21bbe5a19636.jpeg?v=1517640982","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: approx. 2.5cm (L) x 1.3cm (W)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}