Molds - Bows & Ribbons
★Measurement: Approx. 2.1cm (W) x 1.7cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$5.25 USD
{"id":5530250497,"title":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471","handle":"ribbon-bow-21mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resins-epoxy-wax-gumpaste-fondant-md471","description":"\u003cp\u003e★Measurement: Approx. 2.1cm (W) x 1.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:06-11:00","vendor":"MiniatureSweet","type":"Ribbon Mold","tags":["cabochon mold","cell phone deco mold","cute mold","deco mold","decoden mold","decoration","embelishment","Handmade","kawaii mold","mirror mold","polymer clay mold","Scrapbooking","sculpey mold","Supplies","topper mold"],"price":525,"price_min":525,"price_max":525,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943581313,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD471","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471","public_title":null,"options":["Default Title"],"price":525,"weight":10,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143686.jpeg?v=1517648330","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143687.jpeg?v=1517648330","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143688.jpeg?v=1517648330","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143689.jpeg?v=1517648330"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143686.jpeg?v=1517648330","options":["Title"],"media":[{"alt":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471 - MiniatureSweet","id":107505582129,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143686.jpeg?v=1517648330"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143686.jpeg?v=1517648330","width":600},{"alt":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471 - MiniatureSweet","id":107505614897,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143687.jpeg?v=1517648330"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143687.jpeg?v=1517648330","width":600},{"alt":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471 - MiniatureSweet","id":107505647665,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143688.jpeg?v=1517648330"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143688.jpeg?v=1517648330","width":600},{"alt":"Ribbon \/ Bow (21mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD471 - MiniatureSweet","id":107505680433,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143689.jpeg?v=1517648330"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.194143689.jpeg?v=1517648330","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.1cm (W) x 1.7cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 2.8cm (W) x 2.1cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$5.95 USD
{"id":5530251905,"title":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480","handle":"bow-bowtie-28mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resins-gum-paste-fondant-md480","description":"\u003cp\u003e★Measurement: Approx. 2.8cm (W) x 2.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:27-11:00","vendor":"MiniatureSweet","type":"Bow Mold","tags":["bow tie mold","Cabochon","deco mold","decoden supplies","decoration","destash mold","embellishment","Handmade","jewelry mold","kawaii mold","polymer clay mold","ribbon mold","ring mold","scrapbooking mold","Supplies","tool mold"],"price":595,"price_min":595,"price_max":595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943585985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD480","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480","public_title":null,"options":["Default Title"],"price":595,"weight":15,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350496.jpeg?v=1517627306","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350497.jpeg?v=1517627306","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498_475cfe8d-a734-41a5-9d33-fb7ee404c504.jpeg?v=1517627306","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499_fa97854f-e19e-4317-8772-643547aab8f6.jpeg?v=1517627306"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350496.jpeg?v=1517627306","options":["Title"],"media":[{"alt":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480 - MiniatureSweet","id":107506761777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350496.jpeg?v=1517627306"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350496.jpeg?v=1517627306","width":600},{"alt":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480 - MiniatureSweet","id":107506794545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350497.jpeg?v=1517627306"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350497.jpeg?v=1517627306","width":600},{"alt":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480 - MiniatureSweet","id":107506827313,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498_475cfe8d-a734-41a5-9d33-fb7ee404c504.jpeg?v=1517627306"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498_475cfe8d-a734-41a5-9d33-fb7ee404c504.jpeg?v=1517627306","width":600},{"alt":"Bow \/ Bowtie (28mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resins, Gum Paste, Fondant) MD480 - MiniatureSweet","id":107506860081,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499_fa97854f-e19e-4317-8772-643547aab8f6.jpeg?v=1517627306"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499_fa97854f-e19e-4317-8772-643547aab8f6.jpeg?v=1517627306","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 2.8cm (W) x 2.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.3cm (W) x 0.9cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$3.95 USD
{"id":5530250625,"title":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472","handle":"bow-tie-13mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-cupcake-clay-fimo-resin-wax-gum-paste-fondant-md472","description":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 0.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:09-11:00","vendor":"MiniatureSweet","type":"Bow Mold","tags":["cabochon mold","cell phone deco mold","cute mold","deco mold","decoden supplies","decoration","embellishment","flower mold","Handmade","kawaii mold","polymer clay mold","premo mold","resin mold","Scrapbooking","sculpey mold","Supplies"],"price":395,"price_min":395,"price_max":395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943581761,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD472","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472","public_title":null,"options":["Default Title"],"price":395,"weight":7,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843750.jpeg?v=1517627443","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843751.jpeg?v=1517627443","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843752.jpeg?v=1517627443","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843753.jpeg?v=1517627443"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843750.jpeg?v=1517627443","options":["Title"],"media":[{"alt":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472 - MiniatureSweet","id":107505713201,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843750.jpeg?v=1517627443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843750.jpeg?v=1517627443","width":600},{"alt":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472 - MiniatureSweet","id":107505745969,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843751.jpeg?v=1517627443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843751.jpeg?v=1517627443","width":600},{"alt":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472 - MiniatureSweet","id":107505778737,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843752.jpeg?v=1517627443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843752.jpeg?v=1517627443","width":600},{"alt":"Bow Tie (13mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms, Cupcake (Clay Fimo Resin Wax Gum Paste Fondant) MD472 - MiniatureSweet","id":107505811505,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843753.jpeg?v=1517627443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.193843753.jpeg?v=1517627443","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.3cm (W) x 0.9cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 1.7cm (W) x 1.1cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$4.25 USD
{"id":5530250881,"title":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474","handle":"bow-bowtie-17mm-silicone-flexible-push-mold-miniature-food-sweets-jewelry-charms-clay-fimo-resin-gum-paste-fondant-md474","description":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:14-11:00","vendor":"MiniatureSweet","type":"Bow Mold","tags":["bow tie mold","Cabochon","cell phone deco mold","cupcake mold","deco mold","decoration","destash mold","embellishment","Handmade","jewelry mold","kawaii mold","polymer clay mold","resin mold","ring mold","scrapbooking mold","Supplies"],"price":425,"price_min":425,"price_max":425,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943582657,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD474","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474","public_title":null,"options":["Default Title"],"price":425,"weight":9,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553801.jpeg?v=1517627274","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553817.jpeg?v=1517627274","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498.jpeg?v=1517627274","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499.jpeg?v=1517627274"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553801.jpeg?v=1517627274","options":["Title"],"media":[{"alt":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474 - MiniatureSweet","id":107505975345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553801.jpeg?v=1517627274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553801.jpeg?v=1517627274","width":600},{"alt":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474 - MiniatureSweet","id":107506008113,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553817.jpeg?v=1517627274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.248553817.jpeg?v=1517627274","width":600},{"alt":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474 - MiniatureSweet","id":107506040881,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498.jpeg?v=1517627274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350498.jpeg?v=1517627274","width":600},{"alt":"Bow \/ Bowtie (17mm) Silicone Flexible Push Mold - Miniature Food, Sweets, Jewelry, Charms (Clay, Fimo, Resin, Gum Paste, Fondant) MD474 - MiniatureSweet","id":107506073649,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499.jpeg?v=1517627274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.190350499.jpeg?v=1517627274","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 1.7cm (W) x 1.1cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
★Measurement: Approx. 3.4cm (W) x 1.8cm (L)★ No releasing agent is needed, just pop out your finished piece like in the pictures shown above. ♥...
$5.75 USD
{"id":5530252545,"title":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484","handle":"bow-bowtie-34mm-silicone-flexible-push-mold-jewelry-charms-cupcake-clay-fimo-casting-resins-epoxy-wax-gumpaste-fondant-md484","description":"\u003cp\u003e★Measurement: Approx. 3.4cm (W) x 1.8cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:34-11:00","vendor":"MiniatureSweet","type":"Bow Mold","tags":["beads","Cabochon","cell phone","deco","decoration","embellishment","Handmade","kawaii","polymer clay","premo","ring","scrapbooking","sculpey","soap","Supplies","topper"],"price":575,"price_min":575,"price_max":575,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943587841,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD484","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484","public_title":null,"options":["Default Title"],"price":575,"weight":20,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235031319.jpeg?v=1517627311","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235015708.jpeg?v=1517627311","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014856.jpeg?v=1517627311","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014858.jpeg?v=1517627311"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235031319.jpeg?v=1517627311","options":["Title"],"media":[{"alt":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484 - MiniatureSweet","id":107507286065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235031319.jpeg?v=1517627311"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235031319.jpeg?v=1517627311","width":600},{"alt":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484 - MiniatureSweet","id":107507318833,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235015708.jpeg?v=1517627311"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235015708.jpeg?v=1517627311","width":600},{"alt":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484 - MiniatureSweet","id":107507351601,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014856.jpeg?v=1517627311"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014856.jpeg?v=1517627311","width":600},{"alt":"Bow \/ Bowtie (34mm) Silicone Flexible Push Mold - Jewelry, Charms, Cupcake (Clay, Fimo, Casting Resins, Epoxy, Wax, GumPaste, Fondant) MD484 - MiniatureSweet","id":107507384369,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014858.jpeg?v=1517627311"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.235014858.jpeg?v=1517627311","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e★Measurement: Approx. 3.4cm (W) x 1.8cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}
Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin Mold ★Measurement: Approx. 2.4cm (W)...
$5.25 USD
{"id":5530251777,"title":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478","handle":"bow-mold-24mm-flexible-silicone-mold-mini-cupcake-topper-mold-gumpaste-fondant-mold-chocolate-mold-kawaii-jewelry-cabochon-mold-resin-md478","description":"\u003cp\u003eBow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.4cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e","published_at":"2016-03-26T01:51:00-11:00","created_at":"2016-03-26T01:51:23-11:00","vendor":"MiniatureSweet","type":"Bow Mold","tags":["bow mold","cell phone deco mold","chocolate mold","cupcake topper mold","decoden supplies","decoration","fimo mold","flexible mold","Handmade","kawaii cabochon mold","kawaii jewelry mold","polymer clay mold","resin mold","Scrapbooking","silicone mold","Supplies"],"price":525,"price_min":525,"price_max":525,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16943585857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD478","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478","public_title":null,"options":["Default Title"],"price":525,"weight":10,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238610745.jpeg?v=1517627430","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238593078.jpeg?v=1517627430","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592700.jpeg?v=1517627430","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592702.jpeg?v=1517627430"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238610745.jpeg?v=1517627430","options":["Title"],"media":[{"alt":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478 - MiniatureSweet","id":107506499633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238610745.jpeg?v=1517627430"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238610745.jpeg?v=1517627430","width":600},{"alt":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478 - MiniatureSweet","id":107506532401,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238593078.jpeg?v=1517627430"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238593078.jpeg?v=1517627430","width":600},{"alt":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478 - MiniatureSweet","id":107506565169,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592700.jpeg?v=1517627430"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592700.jpeg?v=1517627430","width":600},{"alt":"Bow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin MD478 - MiniatureSweet","id":107506597937,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592702.jpeg?v=1517627430"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/il_fullxfull.238592702.jpeg?v=1517627430","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBow Mold 24mm Flexible Silicone Mold Mini Cupcake Topper Mold Gumpaste Fondant Mold Chocolate Mold Kawaii Jewelry Cabochon Mold Resin Mold\u003c\/p\u003e\n\u003cp\u003e★Measurement: Approx. 2.4cm (W) x 1.4cm (L)★\u003c\/p\u003e\n\u003cp\u003eNo releasing agent is needed, just pop out your finished piece like in the pictures shown above.\u003c\/p\u003e\n\u003cp\u003e♥ AREAS OF USE ♥\u003cbr\u003e Food (Chocolate, Hard Candy, Butter, Ice Cream, Fudge, Fondant, Ice, Gelatin, Marzipan, Candy Clay, Gum Paste, Royal Icing, Gummi Bears, Poured Sugar, Pastillage, Nougat, Cheese, Pate, Tallow, Edible Cake Decorations and more), Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...\u003c\/p\u003e\n\u003cp\u003e♥ TEMPERATURE ♥\u003cbr\u003e Our molds can withstand temperatures as high as 450 degrees F. They are also unaffected and remain pliable when placed in the freezer.\u003c\/p\u003e\n\u003cp\u003e♥ TIPS FOR USE ON CLAY ♥\u003cbr\u003e Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:\u003cbr\u003e - For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.\u003cbr\u003e - Put the clay into the fridge for around 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e♥ FOOD GRADE ♥\u003cbr\u003e All our handmade flexible molds are made with silicone materials that comply with the regulations set forth by the Food and Drug Administration in FDA 21 CFR 177.2600. In addition, these materials have been subjected to extraction testing performed by an FDA approved and independent laboratory that specifically certifies their suitability for use with water based foods and also foods that contain fat.\u003c\/p\u003e\n\u003cp\u003eNOTICE: If you make a mold for non-food purposes, DO NOT use the same mold with food.\u003c\/p\u003e\n\u003cp\u003e♥ CLEAN THE MOLDS ♥\u003cbr\u003e Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.\u003c\/p\u003e\n\u003cp\u003e♥ SPECIAL TECHNIQUE ♥\u003cbr\u003e We use special technique to press our molds to ensure they pick up all the details \/ holes of the master we molded. All the samples shown in the pictures are made by our handmade molds with clay and so you know how your finished piece would look like.\u003c\/p\u003e"}