Molds - Rounds, Teardrops & Shapes | MiniatureSweet | Kawaii Resin Crafts | Decoden Cabochons Supplies

Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm & 16mm)

Hollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$6.99 USD

{"id":9959318209,"title":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm)","handle":"hollow-ball-silicone-mold-3-cavity-resin-shaker-diy-hollow-dome-mold-half-sphere-flexible-mould-uv-resin-soft-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2cm (Diameter) x 1.25cm (Depth) \/ 0.78\" (Diameter) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.8cm (Diameter) x 0.9cm (Depth) \/ 0.72\" (Diameter) x 0.36\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1.6cm (Diameter) x 0.8cm (Depth) \/ 0.62\" (Diameter) x 0.31\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-27T20:22:27-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36837094977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2102","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm)","public_title":null,"options":["Default Title"],"price":699,"weight":35,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","options":["Title"],"media":[{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365658046513,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365657980977,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365657948209,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365817593905,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2cm (Diameter) x 1.25cm (Depth) \/ 0.78\" (Diameter) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.8cm (Diameter) x 0.9cm (Depth) \/ 0.72\" (Diameter) x 0.36\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1.6cm (Diameter) x 0.8cm (Depth) \/ 0.62\" (Diameter) x 0.31\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Hollow dome silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$6.99 USD

{"id":9757152641,"title":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm)","handle":"hollow-dome-silicone-mold-2-cavity-hollow-ball-mold-flexible-half-sphere-mold-uv-resin-mold-shaker-charm-making-clear-soft-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2.5cm (Diameter) x 1.25cm (Depth) \/ 0.98\" (Diameter) x 0.49\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 2.2cm (Diameter) x 1.1cm (Depth) \/ 0.86\" (Diameter) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T18:53:08-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36002532929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2070","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm)","public_title":null,"options":["Default Title"],"price":699,"weight":44,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","options":["Title"],"media":[{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328080031793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328079966257,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328079933489,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":365817823281,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2.5cm (Diameter) x 1.25cm (Depth) \/ 0.98\" (Diameter) x 0.49\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 2.2cm (Diameter) x 1.1cm (Depth) \/ 0.86\" (Diameter) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm & 10mm)

Hollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$4.99 USD

{"id":9959493121,"title":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm)","handle":"half-sphere-hollow-mold-3-cavity-hollow-dome-cabochon-mold-resin-ball-shaker-mold-flexible-resin-mould","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 1.4cm (Diameter) x 0.7cm (Depth) \/ 0.56\" (Diameter) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.2cm (Diameter) x 0.6cm (Depth) \/ 0.47\" (Diameter) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1cm (Diameter) x 0.5cm (Depth) \/ 0.39\" (Diameter) x 0.2\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-27T20:45:20-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36837745281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2103","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm)","public_title":null,"options":["Default Title"],"price":499,"weight":26,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","options":["Title"],"media":[{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691306033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691273265,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691240497,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365817331761,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 1.4cm (Diameter) x 0.7cm (Depth) \/ 0.56\" (Diameter) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.2cm (Diameter) x 0.6cm (Depth) \/ 0.47\" (Diameter) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1cm (Diameter) x 0.5cm (Depth) \/ 0.39\" (Diameter) x 0.2\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm)

Tiny mini teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...

$2.99 USD

{"id":9931499201,"title":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm)","handle":"mini-teardrop-flexible-mold-6-cavity-uv-resin-silicone-mold-small-cabochon-mold-kawaii-soft-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5mm x 5.5mm, 5mm x 7mm, 5mm x 9mm, 7mm x 11mm, 10mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T15:49:59-11:00","vendor":"MiniatureSweet","type":"Teardrop Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tear drop mold","teardrop mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36714767809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2076","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287","options":["Title"],"media":[{"alt":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm) - MiniatureSweet","id":362781835313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5mm x 5.5mm, 5mm x 7mm, 5mm x 9mm, 7mm x 11mm, 10mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Assorted small geometry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...

$0.99 USD

{"id":770147909681,"title":"Small Geometry Silicone Mold (12 Cavity) | Small Geometric Mould | Round Mold | Square Mold | Triangle Mold | Rhombus Mold","handle":"small-geometry-silicone-mold-small-geometric-mould-stud-earring-making-resin-jewelry-diy-clear-mold-for-uv-resin","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted small geometry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 9mm \u0026amp; 11mm (Diameter) \/ 0.35\" \u0026amp; 0.43\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. \u003cspan\u003e9mm \u0026amp; 11mm (W) \/ 0.35\" \u0026amp; 0.43\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Triangle: approx. 10mm (W) x 10mm (L) \/ 0.39\" (W) x 0.39\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Rhombus: approx. 8mm (W) x 14mm (L) \/ 0.31\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-15T00:42:37-11:00","created_at":"2018-05-15T00:30:04-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Circle Mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhombus mold","round mold","Silicone Mold","soft mold","Square Mold","stud earring","Stud Earrings","tiny mold","triangle mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8699373092913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1169","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Small Geometry Silicone Mold (12 Cavity) | Small Geometric Mould | Round Mold | Square Mold | Triangle Mold | Rhombus Mold","public_title":null,"options":["Default Title"],"price":99,"weight":20,"compare_at_price":null,"inventory_quantity":73,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/019_9268b3d5-8c6f-4340-a317-6bb3599c2451.jpg?v=1526455090"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/019_9268b3d5-8c6f-4340-a317-6bb3599c2451.jpg?v=1526455090","options":["Title"],"media":[{"alt":"Small Geometry Silicone Mold (12 Cavity) | Small Geometric Mould | Round Mold | Square Mold | Triangle Mold | Rhombus Mold - MiniatureSweet","id":2590108418183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/019_9268b3d5-8c6f-4340-a317-6bb3599c2451.jpg?v=1526455090"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/019_9268b3d5-8c6f-4340-a317-6bb3599c2451.jpg?v=1526455090","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted small geometry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Round: approx. 9mm \u0026amp; 11mm (Diameter) \/ 0.35\" \u0026amp; 0.43\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. \u003cspan\u003e9mm \u0026amp; 11mm (W) \/ 0.35\" \u0026amp; 0.43\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Triangle: approx. 10mm (W) x 10mm (L) \/ 0.39\" (W) x 0.39\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Rhombus: approx. 8mm (W) x 14mm (L) \/ 0.31\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm)

Hollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for...

$9.99 USD

{"id":9961198785,"title":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm)","handle":"resin-shaker-charm-mold-hollow-oval-dome-mold-3-cavity-uv-resin-soft-mold-epoxy-resin-art-supplies-silicone-flexible-mould","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our oval base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/6KRBo1\" target=\"_blank\" title=\"Oval base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/6KRBo1\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2.2cm (W) x 3cm (L) x 0.8cm (D) \/ 0.85\" (W) x 1.18\" (L) x 0.31\" (D)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.7cm (W) x 2.5cm (L) x 0.7cm (D) \/ 0.68\" (W) x x 0.99\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1.3cm (W) x 2.5cm (L) x 0.7cm (D) \/ 0.5\" (W) x 0.98\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-28T02:39:36-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","hollow dome mold","hollow oval mold","kawaii crafts","kawaii mold","oval dome mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker charm","Silicone Mold","soft mold","UV resin"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36844062017,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2109","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm)","public_title":null,"options":["Default Title"],"price":999,"weight":44,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109.jpg?v=1517670497","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-02.jpg?v=1517670497","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-03.jpg?v=1517670497","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_39508b88-c989-42fd-af84-592ed11df89e.jpg?v=1517670497"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109.jpg?v=1517670497","options":["Title"],"media":[{"alt":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm) - MiniatureSweet","id":366224080945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109.jpg?v=1517670497"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109.jpg?v=1517670497","width":600},{"alt":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm) - MiniatureSweet","id":366224048177,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-02.jpg?v=1517670497"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-02.jpg?v=1517670497","width":600},{"alt":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm) - MiniatureSweet","id":366223982641,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-03.jpg?v=1517670497"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2109-03.jpg?v=1517670497","width":600},{"alt":"Resin Shaker Charm Mold | Hollow Oval Dome Mold (3 Cavity) | UV Resin Soft Mold | Epoxy Resin Art Supplies | Silicone Flexible Mould (22mm x 30mm, 17mm x 25mm, 13mm x 25mm) - MiniatureSweet","id":366275002417,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_39508b88-c989-42fd-af84-592ed11df89e.jpg?v=1517670497"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_39508b88-c989-42fd-af84-592ed11df89e.jpg?v=1517670497","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our oval base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/6KRBo1\" target=\"_blank\" title=\"Oval base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/6KRBo1\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2.2cm (W) x 3cm (L) x 0.8cm (D) \/ 0.85\" (W) x 1.18\" (L) x 0.31\" (D)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.7cm (W) x 2.5cm (L) x 0.7cm (D) \/ 0.68\" (W) x x 0.99\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1.3cm (W) x 2.5cm (L) x 0.7cm (D) \/ 0.5\" (W) x 0.98\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm)

Hollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for...

$7.99 USD

{"id":9961232193,"title":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm)","handle":"hollow-oval-dome-silicone-mold-3-cavity-kawaii-shaker-mold-clear-soft-mold-uv-resin-crafts-flexible-jewelry-mould","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our oval base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/6KRBo1\" target=\"_blank\" title=\"Oval base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/6KRBo1\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 1.3cm (W) x 1.8cm (L) x 0.7cm (D) \/ 0.5\" (W) x 0.7\" (L) x 0.28\" (D)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.1cm (W) x 1.6cm (L) x 0.7cm (D) \/ 0.44\" (W) x x 0.63\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm (W) x 1.4cm (L) x 0.5cm (D) \/ 0.38\" (W) x 0.55\" (L) x 0.21\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-07-28T03:00:23-11:00","created_at":"2017-07-28T02:51:10-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","hollow dome mold","hollow oval mold","kawaii crafts","kawaii mold","oval dome mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker charm","Silicone Mold","soft mold","UV resin"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36844133697,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2110","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm)","public_title":null,"options":["Default Title"],"price":799,"weight":25,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110.jpg?v=1517670495","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-02.jpg?v=1517670495","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-03.jpg?v=1517670495","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_b3a232bc-80f7-45ce-9ad0-879e44cc3da2.jpg?v=1517670495"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110.jpg?v=1517670495","options":["Title"],"media":[{"alt":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm) - MiniatureSweet","id":366237810737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110.jpg?v=1517670495"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110.jpg?v=1517670495","width":600},{"alt":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm) - MiniatureSweet","id":366237777969,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-02.jpg?v=1517670495"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-02.jpg?v=1517670495","width":600},{"alt":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm) - MiniatureSweet","id":366237581361,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-03.jpg?v=1517670495"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2110-03.jpg?v=1517670495","width":600},{"alt":"Hollow Oval Dome Silicone Mold (3 Cavity) | Kawaii Shaker Mold | Clear Soft Mold | UV Resin Crafts | Flexible Jewelry Mould (13mm x 18mm, 11mm x 16mm, 10mm x 14mm) - MiniatureSweet","id":366274805809,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_b3a232bc-80f7-45ce-9ad0-879e44cc3da2.jpg?v=1517670495"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2111-02_b3a232bc-80f7-45ce-9ad0-879e44cc3da2.jpg?v=1517670495","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow oval dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our oval base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/6KRBo1\" target=\"_blank\" title=\"Oval base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/6KRBo1\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 1.3cm (W) x 1.8cm (L) x 0.7cm (D) \/ 0.5\" (W) x 0.7\" (L) x 0.28\" (D)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.1cm (W) x 1.6cm (L) x 0.7cm (D) \/ 0.44\" (W) x x 0.63\" (L) x 0.29\" (D)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm (W) x 1.4cm (L) x 0.5cm (D) \/ 0.38\" (W) x 0.55\" (L) x 0.21\" (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm & 10mm)

Hollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$7.99 USD

{"id":9961043585,"title":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm)","handle":"resin-shaker-mold-hollow-mold-in-square-cube-shape-3-cavity-uv-resin-silicone-mold-epoxy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 1.4cm (W) x 0.7cm (Depth) \/ 0.53\" (W) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.2cm (W) x 0.6cm (Depth) \/ 0.47\" (W) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm (W) x 0.5cm (Depth) \/ 0.38\" (W) x 0.21\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-28T01:40:53-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","hollow cube mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker charm","Silicone Mold","soft mold","Square Mold","UV resin"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36843790657,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2107","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm)","public_title":null,"options":["Default Title"],"price":799,"weight":28,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107.jpg?v=1517670482","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-02.jpg?v=1517670482","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-03.jpg?v=1517670482","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_b1ff6c4c-2f40-4a58-b958-2fc72efb2425.jpg?v=1517670482"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107.jpg?v=1517670482","options":["Title"],"media":[{"alt":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":366186364977,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107.jpg?v=1517670482"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107.jpg?v=1517670482","width":600},{"alt":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":366186332209,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-02.jpg?v=1517670482"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-02.jpg?v=1517670482","width":600},{"alt":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":366186299441,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-03.jpg?v=1517670482"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2107-03.jpg?v=1517670482","width":600},{"alt":"Resin Shaker Mold | Hollow Mold in Square Cube Shape (3 Cavity) | UV Resin Silicone Mold | Epoxy Resin Craft Supplies (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":366214086705,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_b1ff6c4c-2f40-4a58-b958-2fc72efb2425.jpg?v=1517670482"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_b1ff6c4c-2f40-4a58-b958-2fc72efb2425.jpg?v=1517670482","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 1.4cm (W) x 0.7cm (Depth) \/ 0.53\" (W) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.2cm (W) x 0.6cm (Depth) \/ 0.47\" (W) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1cm (W) x 0.5cm (Depth) \/ 0.38\" (W) x 0.21\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm)

Tiny mini faceted rhinestone and round dome silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent...

$2.99 USD

{"id":9931505217,"title":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm)","handle":"faceted-rhinestone-and-mini-round-dome-flexible-mold-8-cavity-gemstone-mold-silicone-uv-resin-mold-clear-mould-kawaii-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini faceted rhinestone and round dome silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rhinestones: approx. 4.5mm, 5mm, 7mm, 8.5mm\u003c\/p\u003e\n\u003cp\u003e- Dome: approx. 5.5mm, 7mm, 8.5mm, 10mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T16:04:58-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","Faceted rhinestones","flexible mold","gem mold","Gemstone Mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhinestone mold","round dome mold","round rhinestone","Silicone Mold","soft mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36714946945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2077","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm)","public_title":null,"options":["Default Title"],"price":299,"weight":11,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289","options":["Title"],"media":[{"alt":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm) - MiniatureSweet","id":362781900849,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini faceted rhinestone and round dome silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rhinestones: approx. 4.5mm, 5mm, 7mm, 8.5mm\u003c\/p\u003e\n\u003cp\u003e- Dome: approx. 5.5mm, 7mm, 8.5mm, 10mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Mini Round Silicone Mold (3 Cavity) | Tiny Circle Mold | Resin Jewelry Making | Tiny Geometric Mold | UV Resin Mould

Mini round silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry,...

$1.79 USD

{"id":769462763569,"title":"Mini Round Silicone Mold (3 Cavity) | Tiny Circle Mold | Resin Jewelry Making | Tiny Geometric Mold | UV Resin Mould","handle":"mini-round-silicone-mold-3-cavity-tiny-circle-mold-resin-jewelry-making-tiny-geometric-mold-uv-resin-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini round silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 0.5cm (Diameter) \/ 0.2\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. \u003cspan\u003e0.7cm (Diameter) \/ 0.28\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Large\u003c\/span\u003e\u003cspan\u003e: approx. 0.9cm (Diameter) \/ 0.35\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-12T00:25:06-11:00","created_at":"2018-05-11T23:59:36-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix","tags":["cabochon mold","Circle Mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","stud earring","Stud Earrings","tiny mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8689302765617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1156","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Round Silicone Mold (3 Cavity) | Tiny Circle Mold | Resin Jewelry Making | Tiny Geometric Mold | UV Resin Mould","public_title":null,"options":["Default Title"],"price":179,"weight":5,"compare_at_price":null,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_d3f4337f-85de-4b03-bc9e-7933004fed6e.jpg?v=1526194857"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_d3f4337f-85de-4b03-bc9e-7933004fed6e.jpg?v=1526194857","options":["Title"],"media":[{"alt":"Mini Round Silicone Mold (3 Cavity) | Tiny Circle Mold | Resin Jewelry Making | Tiny Geometric Mold | UV Resin Mould - MiniatureSweet","id":2587579383943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_d3f4337f-85de-4b03-bc9e-7933004fed6e.jpg?v=1526194857"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/010_d3f4337f-85de-4b03-bc9e-7933004fed6e.jpg?v=1526194857","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini round silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 0.5cm (Diameter) \/ 0.2\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. \u003cspan\u003e0.7cm (Diameter) \/ 0.28\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Large\u003c\/span\u003e\u003cspan\u003e: approx. 0.9cm (Diameter) \/ 0.35\" (Diameter)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies

Round, square and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin,...

$1.99 USD

{"id":4169287991431,"title":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies","handle":"round-square-teardrop-silicone-mold-geometry-cabochon-making-geometric-jewellery-diy-resin-art-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, square and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.5cm, 1.7cm, 2.3cm and 2.4cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.5cm and 1.6cm (W)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 2.4cm (W) x 3.5cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:36:31-11:00","created_at":"2019-10-07T20:51:11-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Circle Mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","Square Mold","tear drop mold","teardrop mold","uv resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30301289545863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2022A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies","public_title":null,"options":["Default Title"],"price":199,"weight":29,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","options":["Title"],"media":[{"alt":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies - MiniatureSweet","id":3170399355015,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_4a708c79-abec-45cd-83a1-3c589d57ff5a.jpg?v=1570625937","width":600},{"alt":"Round Square Teardrop Silicone Mold (8 Cavity) | Geometry Cabochon Making | Geometric Jewellery DIY | Resin Art Supplies - MiniatureSweet","id":3170399125639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007-02_2b2b3a1a-cc88-4828-8680-bfb2131da6a7.jpg?v=1570625937","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, square and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 1.5cm, 1.7cm, 2.3cm and 2.4cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 1.5cm and 1.6cm (W)\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 2.4cm (W) x 3.5cm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}

Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)

Long rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...

Sold Out

Add to Cart

{"id":9753626945,"title":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","handle":"long-rectangular-bar-mold-rectangle-charm-mold-clear-uv-resin-jewelry-mold-flexible-silicone-mould-epoxy-resin-art","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:57:05-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["bar pendant","cabochon mold","charm mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","long bar mold","pendant mold","rectangle","rectangle charm","rectangle mold","rectangular mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Shape Mold","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988833089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1125","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","public_title":null,"options":["Default Title"],"price":99,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","options":["Title"],"media":[{"alt":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm) - MiniatureSweet","id":326737002545,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm)

Tiny mini rhombus and triangle pyramid silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$2.99 USD

{"id":9931819649,"title":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm)","handle":"rhombus-and-triangle-pyramid-mold-8-cavity-mini-geometry-mold-flexible-uv-resin-mold-clear-silicone-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini rhombus and triangle pyramid silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 6mm x 5mm, 8mm x 7mm, 10mm x 8mm\u003c\/p\u003e\n\u003cp\u003e- Rhombus: approx. 5mm x 8mm, 6mm x 9mm, 7mm x 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T20:36:35-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","nail art","Pyramid mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Rhombus mold","Silicone Mold","soft mold","tiny mini mold","triangle mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36718601345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2079","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292","options":["Title"],"media":[{"alt":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm) - MiniatureSweet","id":362809720881,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini rhombus and triangle pyramid silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 6mm x 5mm, 8mm x 7mm, 10mm x 8mm\u003c\/p\u003e\n\u003cp\u003e- Rhombus: approx. 5mm x 8mm, 6mm x 9mm, 7mm x 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm)

Rectangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...

Sold Out

Add to Cart

{"id":9753653121,"title":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm)","handle":"rectangle-pendant-mold-rectangular-charm-mould-epoxy-resin-jewellery-mold-clear-silicone-mould-uv-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRectangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.4cm (W) x 4.9cm (L) \/ 0.94\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T02:17:14-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["cabochon mold","charm mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","pendant mold","rectangle","rectangle charm","rectangle mold","rectangular mold","Rectangular pendant","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Shape Mold","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35989059713,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1126","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm)","public_title":null,"options":["Default Title"],"price":99,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829","options":["Title"],"media":[{"alt":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm) - MiniatureSweet","id":326737199153,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRectangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.4cm (W) x 4.9cm (L) \/ 0.94\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm & 22mm)

Hollow cube silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$10.99 USD

{"id":9960120001,"title":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm)","handle":"hollow-cube-mold-2-cavity-hollow-square-cabochon-mould-resin-shaker-making-resin-jewelry-mold-flexible-silicone-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2.5cm (W) x 1.25cm (Depth) \/ 0.98\" (W) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 2.2cm (W) x 1.1cm (Depth) \/ 0.86\" (W) x 0.45\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-27T22:22:32-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","hollow cube mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker charm","Silicone Mold","soft mold","Square Mold","UV resin"],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36840049921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2105","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm)","public_title":null,"options":["Default Title"],"price":1099,"weight":68,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105.jpg?v=1517670478","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-02.jpg?v=1517670478","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-03.jpg?v=1517670478","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_be8ae339-ba5b-48c5-a003-3229b2549101.jpg?v=1517670478"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105.jpg?v=1517670478","options":["Title"],"media":[{"alt":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm) - MiniatureSweet","id":365846822961,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105.jpg?v=1517670478"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105.jpg?v=1517670478","width":600},{"alt":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm) - MiniatureSweet","id":365846790193,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-02.jpg?v=1517670478"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-02.jpg?v=1517670478","width":600},{"alt":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm) - MiniatureSweet","id":365846757425,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-03.jpg?v=1517670478"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2105-03.jpg?v=1517670478","width":600},{"alt":"Hollow Cube Mold (2 Cavity) | Hollow Square Cabochon Mould | Resin Shaker Making | Resin Jewelry Mold | Flexible Silicone Mold (25mm \u0026 22mm) - MiniatureSweet","id":366213398577,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_be8ae339-ba5b-48c5-a003-3229b2549101.jpg?v=1517670478"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_be8ae339-ba5b-48c5-a003-3229b2549101.jpg?v=1517670478","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2.5cm (W) x 1.25cm (Depth) \/ 0.98\" (W) x 0.5\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 2.2cm (W) x 1.1cm (Depth) \/ 0.86\" (W) x 0.45\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm & 16mm)

Hollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$10.99 USD

{"id":9960977345,"title":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm)","handle":"hollow-square-cube-mold-3-cavity-resin-shaker-charm-diy-cube-cabochon-silicone-mold-resin-jewellery-mold-flexible-uv-resin-mould","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2cm (W) x 1cm (Depth) \/ 0.77\" (W) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.8cm (W) x 0.9cm (Depth) \/ 0.7\" (W) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1.6cm (W) x 0.8cm (Depth) \/ 0.62\" (W) x 0.32\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-28T01:20:23-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","hollow cube mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker charm","Silicone Mold","soft mold","Square Mold","UV resin"],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36843630465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2106","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm)","public_title":null,"options":["Default Title"],"price":1099,"weight":57,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106.jpg?v=1517670480","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-02.jpg?v=1517670480","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-03.jpg?v=1517670480","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_019c1a53-90fa-4939-bbbc-e4b754aa248d.jpg?v=1517670480"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106.jpg?v=1517670480","options":["Title"],"media":[{"alt":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":366172471345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106.jpg?v=1517670480"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106.jpg?v=1517670480","width":600},{"alt":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":366172373041,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-02.jpg?v=1517670480"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-02.jpg?v=1517670480","width":600},{"alt":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":366172241969,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-03.jpg?v=1517670480"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2106-03.jpg?v=1517670480","width":600},{"alt":"Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":366213824561,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_019c1a53-90fa-4939-bbbc-e4b754aa248d.jpg?v=1517670480"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2108-02_019c1a53-90fa-4939-bbbc-e4b754aa248d.jpg?v=1517670480","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our square base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/HvS9mB\" target=\"_blank\" title=\"Square base \u0026amp; pendant bail mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/HvS9mB\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big: approx. 2cm (W) x 1cm (Depth) \/ 0.77\" (W) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium: approx. 1.8cm (W) x 0.9cm (Depth) \/ 0.7\" (W) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small: approx. 1.6cm (W) x 0.8cm (Depth) \/ 0.62\" (W) x 0.32\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DdJzGqNyOKQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts

Round, oval and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy...

$5.99 USD

{"id":4189498638471,"title":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts","handle":"round-oval-teardrop-cabochon-silicone-mold-assortment-gemstone-mold-gem-mold-soft-clear-mould-for-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, oval and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 7mm, 8mm, 11mm, 14mm, 16mm, 23mm, 29mm and 34mm\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 11mm x 17mm, 15mm x 23mm, 18mm x 27mm, 23mm x 34mm, 28mm x 41mm\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 11mm x 17mm, 15mm x 23mm, 19mm x 29mm, 24mm x 36mm, 30mm x 45mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:36:33-11:00","created_at":"2019-10-08T16:28:41-11:00","vendor":"MiniatureSweet","type":"Round Mold, Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden supplies","dome cabochon","embellishment mold","epoxy resin","flexible mold","gem mold","gems","gemstone mold","gemstones","oval mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","tear drop","teardrop mold","uv resin"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30466899247239,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3077","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts","public_title":null,"options":["Default Title"],"price":599,"weight":82,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","options":["Title"],"media":[{"alt":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts - MiniatureSweet","id":4861169270919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005-02_20c101e8-1150-488e-b08a-9bdf1d179eed.jpg?v=1570625932","width":600},{"alt":"Round Oval Teardrop Cabochon Silicone Mold Assortment (19 Cavity) | Gemstone Mold | Gem Mold | Soft Clear Mould for Resin Crafts - MiniatureSweet","id":4861169434759,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/005_4591d039-c4ce-4fd8-9f62-290bf2b93140.jpg?v=1570625932","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound, oval and teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Round: approx. 7mm, 8mm, 11mm, 14mm, 16mm, 23mm, 29mm and 34mm\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 11mm x 17mm, 15mm x 23mm, 18mm x 27mm, 23mm x 34mm, 28mm x 41mm\u003c\/p\u003e\n\u003cp\u003e- Teardrop: approx. 11mm x 17mm, 15mm x 23mm, 19mm x 29mm, 24mm x 36mm, 30mm x 45mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}

Mini Oval Silicone Mold (3 Cavity) | Resin Stud Earring Making | Resin Jewellery Mould | UV Resin Craft Supplies

Mini oval silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry,...

$1.79 USD

{"id":769461354545,"title":"Mini Oval Silicone Mold (3 Cavity) | Resin Stud Earring Making | Resin Jewellery Mould | UV Resin Craft Supplies","handle":"mini-oval-silicone-mold-3-cavity-resin-stud-earring-making-resin-jewellery-mould-uv-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini oval silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 0.7cm (W) x 0.9cm (L) \/ 0.28\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- \u003cspan\u003eOval\u003c\/span\u003e: approx. 0.8cm (W) x 1.1cm (L) \/ 0.31\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Oval\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e9\u003c\/span\u003e\u003cspan\u003ecm (W) x 1.3\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.35\" (W) x 0.51\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-12T00:25:06-11:00","created_at":"2018-05-11T23:43:37-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","mini mold","oval mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","stud earring","Stud Earrings","tiny mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8689296244785,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1154","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Oval Silicone Mold (3 Cavity) | Resin Stud Earring Making | Resin Jewellery Mould | UV Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":179,"weight":5,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_431f01a1-f4e1-4e62-b6fd-45adb0c2c22b.jpg?v=1526194856"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_431f01a1-f4e1-4e62-b6fd-45adb0c2c22b.jpg?v=1526194856","options":["Title"],"media":[{"alt":"Mini Oval Silicone Mold (3 Cavity) | Resin Stud Earring Making | Resin Jewellery Mould | UV Resin Craft Supplies - MiniatureSweet","id":2587563753607,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_431f01a1-f4e1-4e62-b6fd-45adb0c2c22b.jpg?v=1526194856"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_431f01a1-f4e1-4e62-b6fd-45adb0c2c22b.jpg?v=1526194856","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini oval silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Oval: approx. 0.7cm (W) x 0.9cm (L) \/ 0.28\" (W) x 0.35\" (L)\u003c\/p\u003e\n\u003cp\u003e- \u003cspan\u003eOval\u003c\/span\u003e: approx. 0.8cm (W) x 1.1cm (L) \/ 0.31\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Oval\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e9\u003c\/span\u003e\u003cspan\u003ecm (W) x 1.3\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.35\" (W) x 0.51\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm)

Tiny mini oval dome cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...

$2.99 USD

{"id":9931849537,"title":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm)","handle":"oval-dome-cabochon-mold-5-cavity-soft-uv-resin-mold-silicone-flexible-mold-kawaii-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini oval dome cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3mm x 5.5mm, 4.5mm x 7.5mm, 6.5mm x 9mm, 8.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T21:18:42-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","dome cabochon","dome mold","embellishment mold","flexible mold","Gemstone Mold","kawaii crafts","kawaii mold","nail art","oval dome","oval gems","oval gemstones","oval mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36719230529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2081","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295","options":["Title"],"media":[{"alt":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm) - MiniatureSweet","id":362810441777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini oval dome cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3mm x 5.5mm, 4.5mm x 7.5mm, 6.5mm x 9mm, 8.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Mini Quadrilateral Silicone Mold (4 Cavity) | Square Mold | Rectangle Mold | Resin Jewellery DIY | Clear Mould for UV Resin

Mini quadrilateral silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...

$1.79 USD

{"id":769462042673,"title":"Mini Quadrilateral Silicone Mold (4 Cavity) | Square Mold | Rectangle Mold | Resin Jewellery DIY | Clear Mould for UV Resin","handle":"mini-quadrilateral-silicone-mold-4-cavity-square-mold-rectangle-mold-resin-jewellery-diy-clear-mould-for-uv-resin","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini quadrilateral silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 0.8cm (W) x 0.8cm (L) \/ 0.31\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular \u003cspan\u003eRectangle\u003c\/span\u003e: approx. 0.7cm (W) x 1cm (L) \/ 0.28\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Rectangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e3\u003c\/span\u003e\u003cspan\u003ecm (W) x 1.1\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.12\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Irregular Rectangle: approx. 0.3cm (W) x 1.4cm (L) \/ 0.12\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-12T00:25:06-11:00","created_at":"2018-05-11T23:51:39-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","mini mold","Quadrilateral mold","rectangle mold","rectangular mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","Square Mold","stud earring","Stud Earrings","tiny mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8689299849265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1155","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Quadrilateral Silicone Mold (4 Cavity) | Square Mold | Rectangle Mold | Resin Jewellery DIY | Clear Mould for UV Resin","public_title":null,"options":["Default Title"],"price":179,"weight":5,"compare_at_price":null,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_072ce829-5389-4b4b-a6d2-f4c7a446fae6.jpg?v=1526194856"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_072ce829-5389-4b4b-a6d2-f4c7a446fae6.jpg?v=1526194856","options":["Title"],"media":[{"alt":"Mini Quadrilateral Silicone Mold (4 Cavity) | Square Mold | Rectangle Mold | Resin Jewellery DIY | Clear Mould for UV Resin - MiniatureSweet","id":2587571486855,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_072ce829-5389-4b4b-a6d2-f4c7a446fae6.jpg?v=1526194856"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/009_072ce829-5389-4b4b-a6d2-f4c7a446fae6.jpg?v=1526194856","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini quadrilateral silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Square: approx. 0.8cm (W) x 0.8cm (L) \/ 0.31\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e- Irregular \u003cspan\u003eRectangle\u003c\/span\u003e: approx. 0.7cm (W) x 1cm (L) \/ 0.28\" (W) x 0.39\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Rectangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e3\u003c\/span\u003e\u003cspan\u003ecm (W) x 1.1\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.12\" (W) x 0.43\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Irregular Rectangle: approx. 0.3cm (W) x 1.4cm (L) \/ 0.12\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Square and Rectangle Gemstones Silicone Mold (19 Cavity) | Assorted Gems Mold | Rhinestone Mold | Clear Soft Mould for UV Resin

Square and rectangle gemstone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy...

$5.99 USD

{"id":4189487628423,"title":"Square and Rectangle Gemstones Silicone Mold (19 Cavity) | Assorted Gems Mold | Rhinestone Mold | Clear Soft Mould for UV Resin","handle":"square-and-rectangle-gemstones-silicone-mold-assorted-gems-mold-rhinestone-mold-clear-soft-mould-for-uv-resin","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare and rectangle gemstone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Square: approx. 12mm, 14mm, 20mm, 24mm and 30mm\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4mm x 14mm, 6mm x 20mm, 8mm x 20mm, 9mm x 15mm, 10mm x 22mm, 10mm x 26mm, 13mm x 18mm, 13mm x 20mm, 14mm x 40mm, 16mm x 25mm, 19mm x 27mm, 21mm x 30mm, 23mm x 32mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-27T14:36:32-11:00","created_at":"2019-10-08T16:10:01-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","gem mold","gems","gemstone mold","gemstones","rectangle mold","rectangular mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhinestone mold","rhinestones","Silicone Mold","soft mold","square mold","uv resin"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30466791112839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2255","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Square and Rectangle Gemstones Silicone Mold (19 Cavity) | Assorted Gems Mold | Rhinestone Mold | Clear Soft Mould for UV Resin","public_title":null,"options":["Default Title"],"price":599,"weight":80,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_a9aeaf1c-f9d6-4ff0-b0cf-4aa22fd031aa.jpg?v=1570625959","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_3952ede9-3846-4212-8bb2-88f730143d01.jpg?v=1570625959"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_a9aeaf1c-f9d6-4ff0-b0cf-4aa22fd031aa.jpg?v=1570625959","options":["Title"],"media":[{"alt":"Square and Rectangle Gemstones Silicone Mold (19 Cavity) | Assorted Gems Mold | Rhinestone Mold | Clear Soft Mould for UV Resin - MiniatureSweet","id":4861101670535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_a9aeaf1c-f9d6-4ff0-b0cf-4aa22fd031aa.jpg?v=1570625959"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004_a9aeaf1c-f9d6-4ff0-b0cf-4aa22fd031aa.jpg?v=1570625959","width":600},{"alt":"Square and Rectangle Gemstones Silicone Mold (19 Cavity) | Assorted Gems Mold | Rhinestone Mold | Clear Soft Mould for UV Resin - MiniatureSweet","id":4861101539463,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_3952ede9-3846-4212-8bb2-88f730143d01.jpg?v=1570625959"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/004-02_3952ede9-3846-4212-8bb2-88f730143d01.jpg?v=1570625959","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare and rectangle gemstone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for uv resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Square: approx. 12mm, 14mm, 20mm, 24mm and 30mm\u003c\/p\u003e\n\u003cp\u003e- Rectangle: approx. 4mm x 14mm, 6mm x 20mm, 8mm x 20mm, 9mm x 15mm, 10mm x 22mm, 10mm x 26mm, 13mm x 18mm, 13mm x 20mm, 14mm x 40mm, 16mm x 25mm, 19mm x 27mm, 21mm x 30mm, 23mm x 32mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}

Small Hexagon Silicone Mold (2 Cavity) | Geometric Stud Earring Making | Geometry Mould | Resin Jewelry DIY (12mm x 11mm)

Small hexagon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making,...

$1.99 USD

{"id":6035007799449,"title":"Small Hexagon Silicone Mold (2 Cavity) | Geometric Stud Earring Making | Geometry Mould | Resin Jewelry DIY (12mm x 11mm)","handle":"small-hexagon-silicone-mold-geometric-stud-earring-making-geometry-mould-resin-jewelry-diy","description":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eSmall hexagon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm (W) x 1.1cm (L) \/ 0.47\" (W) x 0.43\" (L) \u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-12-23T22:04:14-11:00","created_at":"2020-12-23T19:48:24-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["cabochon mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","hexagon mold","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker bit","shaker bits","Silicone Mold","small mold","soft mold","stud earring","Stud Earrings"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37572638671001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD205B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Small Hexagon Silicone Mold (2 Cavity) | Geometric Stud Earring Making | Geometry Mould | Resin Jewelry DIY (12mm x 11mm)","public_title":null,"options":["Default Title"],"price":199,"weight":4,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_c9a26ad2-b830-488f-b70e-d4083c623c9e.jpg?v=1608805543"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_c9a26ad2-b830-488f-b70e-d4083c623c9e.jpg?v=1608805543","options":["Title"],"media":[{"alt":"Small Hexagon Silicone Mold (2 Cavity) | Geometric Stud Earring Making | Geometry Mould | Resin Jewelry DIY (12mm x 11mm) - MiniatureSweet","id":16381527425177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_c9a26ad2-b830-488f-b70e-d4083c623c9e.jpg?v=1608805543"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/008_c9a26ad2-b830-488f-b70e-d4083c623c9e.jpg?v=1608805543","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" id=\"tab_detail\" class=\"tab-pane active\"\u003e\n\u003cp\u003eSmall hexagon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm (W) x 1.1cm (L) \/ 0.47\" (W) x 0.43\" (L) \u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm)

Small diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making,...

$1.99 USD

{"id":6124147933337,"title":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm)","handle":"diamond-silicone-mold-resin-jewellery-making-stud-earrings-mould-epoxy-resin-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) or 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-01-31T17:11:16-11:00","created_at":"2021-01-31T15:46:54-11:00","vendor":"MiniatureSweet","type":"Other Mold, Shape Mold","tags":["cabochon mold","diamond mold","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","shaker bit","shaker bits","Silicone Mold","small mold","soft mold","stud earring","Stud Earrings"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37969799905433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD283B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm)","public_title":null,"options":["Default Title"],"price":199,"weight":5,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918","options":["Title"],"media":[{"alt":"Diamond Silicone Mold (2 Cavity) | Resin Jewellery Making | Stud Earrings Mould | Epoxy Resin Mold (15mm x 14mm) - MiniatureSweet","id":17481406873753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/021_dea93a27-645b-47b9-8baa-c6fef80357f9.jpg?v=1612235918","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSmall diamond silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.5cm (W) x 1.4cm (L) \/ 0.59\" (W) or 0.55\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould

Mini triangle and kite silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy...

$1.79 USD

{"id":769460502577,"title":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould","handle":"mini-triangle-and-kite-silicone-mold-3-cavity-stud-earring-mold-resin-jewelry-mold-uv-resin-clear-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini triangle and kite silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 0.7cm (W) x 1.1cm (L) \/ 0.28\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 0.6cm (W) x 0.8cm (L) \/ 0.24\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003eTriangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e7\u003c\/span\u003e\u003cspan\u003ecm (W) x \u003c\/span\u003e\u003cspan\u003e0.6\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2018-05-12T00:25:06-11:00","created_at":"2018-05-11T23:33:44-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","embellishment mold","epoxy resin","flexible mold","geometric mold","Geometry Mold","kawaii crafts","kawaii mold","kite mold","mini mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","stud earring","Stud Earrings","tiny mold","triangle mold","UV resin"],"price":179,"price_min":179,"price_max":179,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8689290739761,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1153","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould","public_title":null,"options":["Default Title"],"price":179,"weight":5,"compare_at_price":null,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860","options":["Title"],"media":[{"alt":"Mini Triangle and Kite Silicone Mold (3 Cavity) | Stud Earring Mold | Resin Jewelry Mold | UV Resin Clear Mould - MiniatureSweet","id":2587555954823,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/007_b62171fd-1716-4f69-8b3e-1344c1fdd99e.jpg?v=1526194860","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMini triangle and kite silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement (from left to right):\u003c\/p\u003e\n\u003cp\u003e- Kite: approx. 0.7cm (W) x 1.1cm (L) \/ 0.28\" (W) x 0.43\" (L)\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 0.6cm (W) x 0.8cm (L) \/ 0.24\" (W) x 0.31\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003eTriangle\u003c\/span\u003e\u003cspan\u003e: approx. 0.\u003c\/span\u003e\u003cspan\u003e7\u003c\/span\u003e\u003cspan\u003ecm (W) x \u003c\/span\u003e\u003cspan\u003e0.6\u003c\/span\u003e\u003cspan\u003ecm (L) \/ 0.28\" (W) x 0.24\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm & 11.5mm)

Square rhinestone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin...

$2.99 USD

{"id":9932155137,"title":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm)","handle":"square-rhinestone-silicone-mold-8-cavity-flexible-gemstone-mold-kawaii-gem-mold-soft-clear-mould-resin-jewelry-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare rhinestone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5mm, 9.5mm, 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-23T01:51:00-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","Gem Mold","gemstone mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhinestone mold","Silicone Mold","soft mold","square gems","square gemstones","Square Mold","square rhinestones","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36722526721,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2087","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":18,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304","options":["Title"],"media":[{"alt":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm) - MiniatureSweet","id":362849697841,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare rhinestone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5mm, 9.5mm, 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}

Round Straw Topper Silicone Mold | Personalised Straw Topper DIY | Epoxy Resin Mould (45mm)

Round straw topper silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin craft, etc. ★ Measurement:...

$7.99 USD

{"id":6088390410393,"title":"Round Straw Topper Silicone Mold | Personalised Straw Topper DIY | Epoxy Resin Mould (45mm)","handle":"round-straw-topper-silicone-mold-personalised-straw-topper-diy-epoxy-resin-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound straw topper silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin craft, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5cm or 1.77\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2021-01-13T20:13:59-11:00","created_at":"2021-01-13T20:09:55-11:00","vendor":"MiniatureSweet","type":"Round Mold, Straw Topper Mold","tags":["circle mold","embellishment mold","epoxy resin","flexible mold","party decoration","resin art","resin crafts","resin mold","Resin Mould","round mold","round straw topper","Silicone Mold","soft mold","straw accessories","straw accessory","straw attachment","straw topper mold","straw topper mould"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37794268905625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD3003C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Round Straw Topper Silicone Mold | Personalised Straw Topper DIY | Epoxy Resin Mould (45mm)","public_title":null,"options":["Default Title"],"price":799,"weight":43,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_77272c0f-7173-4ed4-a6ee-d22d705cede4.jpg?v=1610705178","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_ebe5bd81-5652-4ab3-9dc1-290caef5d656.jpg?v=1610705179"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_77272c0f-7173-4ed4-a6ee-d22d705cede4.jpg?v=1610705178","options":["Title"],"media":[{"alt":"Round Straw Topper Silicone Mold | Personalised Straw Topper DIY | Epoxy Resin Mould (45mm) - MiniatureSweet","id":17127341031577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_77272c0f-7173-4ed4-a6ee-d22d705cede4.jpg?v=1610705178"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003_77272c0f-7173-4ed4-a6ee-d22d705cede4.jpg?v=1610705178","width":600},{"alt":"Round Straw Topper Silicone Mold | Personalised Straw Topper DIY | Epoxy Resin Mould (45mm) - MiniatureSweet","id":17127340998809,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_ebe5bd81-5652-4ab3-9dc1-290caef5d656.jpg?v=1610705179"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/003-02_ebe5bd81-5652-4ab3-9dc1-290caef5d656.jpg?v=1610705179","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound straw topper silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin craft, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5cm or 1.77\" (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}

Gemstone and Geometry Silicone Mold (6 Cavity) | Rhinestone Square Cube Triangle Mould | Resin Craft Supplies

Gemstone and geometry silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making,...

Sold Out

Add to Cart

{"id":6976480411801,"title":"Gemstone and Geometry Silicone Mold (6 Cavity) | Rhinestone Square Cube Triangle Mould | Resin Craft Supplies","handle":"gemstone-and-geometry-silicone-mold-rhinestone-square-cube-triangle-mould-resin-craft-supplies","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eGemstone and geometry silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Oval rhinestones: approx. 1.7cm (W) x 2.9cm (L) \/ 0.67\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e- Rectangular rhinestones: approx. 1.8cm (W) x 2.5cm (L) \/ 0.71\" (W) x 0.98\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Octagon rhinestones: approx. 1.4cm (W) x 1.4cm (L) \/ 0.55\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Cube: approx. 1.2cm or 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Triangle: approx. 1.6cm (W) x 1.4cm (L) \/ 0.63\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Square frame: approx. 2cm or 0.79\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-08-12T13:49:30-11:00","created_at":"2021-08-10T17:26:51-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","Clear Mold","cube mold","embellishment mold","epoxy resin","flexible mold","gemstone mold","geometry mold","kawaii mold","resin art","resin craft","resin crafts","resin mold","resin mould","rhinestone mold","silicone mold","soft mold","square mold","triangle mold","uv resin"],"price":399,"price_min":399,"price_max":399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40792879890585,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2221A","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Gemstone and Geometry Silicone Mold (6 Cavity) | Rhinestone Square Cube Triangle Mould | Resin Craft Supplies","public_title":null,"options":["Default Title"],"price":399,"weight":31,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_3c3c9b81-ab4b-4206-9aa1-a7f8d4075534.jpg?v=1628711707","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_970f7171-0f8a-4b5d-963a-b97d278d0019.jpg?v=1628711708"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_3c3c9b81-ab4b-4206-9aa1-a7f8d4075534.jpg?v=1628711707","options":["Title"],"media":[{"alt":"Gemstone and Geometry Silicone Mold (6 Cavity) | Rhinestone Square Cube Triangle Mould | Resin Craft Supplies - MiniatureSweet","id":23813614076057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_3c3c9b81-ab4b-4206-9aa1-a7f8d4075534.jpg?v=1628711707"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002_3c3c9b81-ab4b-4206-9aa1-a7f8d4075534.jpg?v=1628711707","width":600},{"alt":"Gemstone and Geometry Silicone Mold (6 Cavity) | Rhinestone Square Cube Triangle Mould | Resin Craft Supplies - MiniatureSweet","id":23813614043289,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_970f7171-0f8a-4b5d-963a-b97d278d0019.jpg?v=1628711708"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/002-02_970f7171-0f8a-4b5d-963a-b97d278d0019.jpg?v=1628711708","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eGemstone and geometry silicone mold. No releasing agent is needed, finished work can be pop out easily from the mold. Excellent for resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: \u003c\/p\u003e\n\u003cp\u003e- Oval rhinestones: approx. 1.7cm (W) x 2.9cm (L) \/ 0.67\" (W) x 1.14\" (L)\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e- Rectangular rhinestones: approx. 1.8cm (W) x 2.5cm (L) \/ 0.71\" (W) x 0.98\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Octagon rhinestones: approx. 1.4cm (W) x 1.4cm (L) \/ 0.55\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Cube: approx. 1.2cm or 0.47\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Triangle: approx. 1.6cm (W) x 1.4cm (L) \/ 0.63\" (W) x 0.55\" (L)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e- Square frame: approx. 2cm or 0.79\" (W)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}

Filter

Molds - Rounds, Teardrops & Shapes