All Molds
Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cab...
$4.99 USD
{"id":9959493121,"title":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm)","handle":"half-sphere-hollow-mold-3-cavity-hollow-dome-cabochon-mold-resin-ball-shaker-mold-flexible-resin-mould","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 1.4cm (Diameter) x 0.7cm (Depth) \/ 0.56\" (Diameter) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.2cm (Diameter) x 0.6cm (Depth) \/ 0.47\" (Diameter) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1cm (Diameter) x 0.5cm (Depth) \/ 0.39\" (Diameter) x 0.2\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-27T20:45:20-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36837745281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2103","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm)","public_title":null,"options":["Default Title"],"price":499,"weight":26,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","options":["Title"],"media":[{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691306033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691273265,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-02.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365691240497,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2103-03.jpg?v=1517670456","width":600},{"alt":"Half Sphere Hollow Mold (3 Cavity) | Hollow Dome Cabochon Mold | Resin Ball Shaker Mold | Flexible Resin Mould (14mm, 12mm \u0026 10mm) - MiniatureSweet","id":365817331761,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02.jpg?v=1517670456","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 1.4cm (Diameter) x 0.7cm (Depth) \/ 0.56\" (Diameter) x 0.28\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.2cm (Diameter) x 0.6cm (Depth) \/ 0.47\" (Diameter) x 0.24\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1cm (Diameter) x 0.5cm (Depth) \/ 0.39\" (Diameter) x 0.2\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker ...
$6.99 USD
{"id":9959318209,"title":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm)","handle":"hollow-ball-silicone-mold-3-cavity-resin-shaker-diy-hollow-dome-mold-half-sphere-flexible-mould-uv-resin-soft-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2cm (Diameter) x 1.25cm (Depth) \/ 0.78\" (Diameter) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.8cm (Diameter) x 0.9cm (Depth) \/ 0.72\" (Diameter) x 0.36\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1.6cm (Diameter) x 0.8cm (Depth) \/ 0.62\" (Diameter) x 0.31\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-27T20:22:27-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36837094977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2102","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm)","public_title":null,"options":["Default Title"],"price":699,"weight":35,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","options":["Title"],"media":[{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365658046513,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365657980977,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-02.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365657948209,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2102-03.jpg?v=1517670458","width":600},{"alt":"Hollow Ball Silicone Mold (3 Cavity) | Resin Shaker DIY | Hollow Dome Mold | Half Sphere Flexible Mould | UV Resin Soft Mold (20mm, 18mm \u0026 16mm) - MiniatureSweet","id":365817593905,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_bd41fc96-074c-4c53-b636-eef4ff05f940.jpg?v=1517670458","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2cm (Diameter) x 1.25cm (Depth) \/ 0.78\" (Diameter) x 0.39\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Medium dome: approx. 1.8cm (Diameter) x 0.9cm (Depth) \/ 0.72\" (Diameter) x 0.36\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 1.6cm (Diameter) x 0.8cm (Depth) \/ 0.62\" (Diameter) x 0.31\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Puffy Heart Assortment Mold (8 Cavity) | Polymer Cla...
$3.49 USD
{"id":9932275265,"title":"Puffy Heart Assortment Mold (8 Cavity) | Polymer Clay Silicone Mold | Clay Craft Supplies | Flexible Embellishment Mold (7mm to 34mm)","handle":"puffy-heart-assortment-mold-8-cavity-polymer-clay-silicone-mold-clay-craft-supplies-flexible-embellishment-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted puffy heart silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7mm x 7mm, 10mm x 9mm, 11mm x 10mm, 14mm x 13mm, 17mm x 15mm, 22mm x 20mm, 26mm x 23mm, 34mm x 30mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KsLPRx20IYA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-23T02:32:06-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Mold Mix","tags":["cabochon mold","clay mold","decoden supplies","embellishment mold","epoxy resin","fimo mold","flexible mold","heart mold","kawaii crafts","kawaii mold","love","Polymer Clay","Puffy Heart Mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","valentine's day","wedding supplies"],"price":349,"price_min":349,"price_max":349,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36723057025,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2090","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Puffy Heart Assortment Mold (8 Cavity) | Polymer Clay Silicone Mold | Clay Craft Supplies | Flexible Embellishment Mold (7mm to 34mm)","public_title":null,"options":["Default Title"],"price":349,"weight":57,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW02.jpg?v=1517671596","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW_-02.jpg?v=1517671596"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW02.jpg?v=1517671596","options":["Title"],"media":[{"alt":"Puffy Heart Assortment Mold (8 Cavity) | Polymer Clay Silicone Mold | Clay Craft Supplies | Flexible Embellishment Mold (7mm to 34mm) - MiniatureSweet","id":2421540651143,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW02.jpg?v=1517671596"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW02.jpg?v=1517671596","width":600},{"alt":"Puffy Heart Assortment Mold (8 Cavity) | Polymer Clay Silicone Mold | Clay Craft Supplies | Flexible Embellishment Mold (7mm to 34mm) - MiniatureSweet","id":2421540290695,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW_-02.jpg?v=1517671596"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2090_NEW_-02.jpg?v=1517671596","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted puffy heart silicone mold in various size. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7mm x 7mm, 10mm x 9mm, 11mm x 10mm, 14mm x 13mm, 17mm x 15mm, 22mm x 20mm, 26mm x 23mm, 34mm x 30mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KsLPRx20IYA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}
12mm Sphere Silicone Mold (5 Cavity) | Flexible Roun...
$3.29 USD
{"id":9932232897,"title":"12mm Sphere Silicone Mold (5 Cavity) | Flexible Round Ball Mold | Epoxy Resin Jewellery Making | Clear UV Resin Soft Mould","handle":"12mm-sphere-silicone-mold-5-cavity-flexible-round-ball-mold-epoxy-resin-jewellery-making-clear-uv-resin-soft-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound sphere silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-23T02:16:29-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix","tags":["ball mold","cabochon mold","clear mold","epoxy resin","flexible mold","geometric mold","geometry mold","globe mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round mold","Silicone Mold","soft mold","sphere mold","UV resin"],"price":329,"price_min":329,"price_max":329,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36722858305,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2089","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"12mm Sphere Silicone Mold (5 Cavity) | Flexible Round Ball Mold | Epoxy Resin Jewellery Making | Clear UV Resin Soft Mould","public_title":null,"options":["Default Title"],"price":329,"weight":24,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089.jpg?v=1517670309","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089-02.jpg?v=1517670309"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089.jpg?v=1517670309","options":["Title"],"media":[{"alt":"12mm Sphere Silicone Mold (5 Cavity) | Flexible Round Ball Mold | Epoxy Resin Jewellery Making | Clear UV Resin Soft Mould - MiniatureSweet","id":362856775729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089.jpg?v=1517670309"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089.jpg?v=1517670309","width":600},{"alt":"12mm Sphere Silicone Mold (5 Cavity) | Flexible Round Ball Mold | Epoxy Resin Jewellery Making | Clear UV Resin Soft Mould - MiniatureSweet","id":362856742961,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089-02.jpg?v=1517670309"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2089-02.jpg?v=1517670309","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRound sphere silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.2cm (Diameter)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003c\/div\u003e"}
Triangle Charm Mold (7 Cavity) | Flexible Geometry M...
$2.99 USD
{"id":9932195009,"title":"Triangle Charm Mold (7 Cavity) | Flexible Geometry Mold | Geometric Silicone Mold | Epoxy Resin Jewellery Supplies (18mm x 16mm)","handle":"triangle-charm-mold-7-cavity-flexible-geometry-mold-geometric-silicone-mold-epoxy-resin-jewellery-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTriangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.8cm (W) x 1.6cm (L) \/ 0.71\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-23T02:04:01-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["charm mold","clear mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","pendant mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","triangle charm","triangle mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36722692545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2088","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Triangle Charm Mold (7 Cavity) | Flexible Geometry Mold | Geometric Silicone Mold | Epoxy Resin Jewellery Supplies (18mm x 16mm)","public_title":null,"options":["Default Title"],"price":299,"weight":22,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2088.jpg?v=1517670306"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2088.jpg?v=1517670306","options":["Title"],"media":[{"alt":"Triangle Charm Mold (7 Cavity) | Flexible Geometry Mold | Geometric Silicone Mold | Epoxy Resin Jewellery Supplies (18mm x 16mm) - MiniatureSweet","id":362853761073,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2088.jpg?v=1517670306"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2088.jpg?v=1517670306","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTriangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.8cm (W) x 1.6cm (L) \/ 0.71\" (W) x 0.63\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Square Rhinestone Silicone Mold (8 Cavity) | Flexibl...
$2.99 USD
{"id":9932155137,"title":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm)","handle":"square-rhinestone-silicone-mold-8-cavity-flexible-gemstone-mold-kawaii-gem-mold-soft-clear-mould-resin-jewelry-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare rhinestone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5mm, 9.5mm, 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-23T01:51:00-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","Gem Mold","gemstone mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhinestone mold","Silicone Mold","soft mold","square gems","square gemstones","Square Mold","square rhinestones","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36722526721,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2087","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":18,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304","options":["Title"],"media":[{"alt":"Square Rhinestone Silicone Mold (8 Cavity) | Flexible Gemstone Mold | Kawaii Gem Mold | Soft Clear Mould | Resin Jewelry Supplies (5.5mm, 9.5mm \u0026 11.5mm) - MiniatureSweet","id":362849697841,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2087.jpg?v=1517670304","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSquare rhinestone silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.5mm, 9.5mm, 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Magical Girl Angel Wing Flexible Mold | Epoxy Resin ...
$2.49 USD
{"id":9931879297,"title":"Magical Girl Angel Wing Flexible Mold | Epoxy Resin Silicone Mold | Kawaii Decoden Crafts | Clear Soft Mould | Mahou Kei Jewellery Making (17mm x 40mm)","handle":"magical-girl-angel-wing-flexible-mold-epoxy-resin-silicone-mold-kawaii-decoden-crafts-clear-soft-mould-mahou-kei-jewellery-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii angel wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.7cm (W) x 4cm (L) \/ 0.73\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T22:43:43-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["Angel Wing Mold","angel wings","cabochon mold","cellphone decoration","clear mold","decoden supplies","embellishment mold","Fairy Kei","flexible mold","kawaii crafts","kawaii mold","magical girl","mahou kei","phone case deco","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36720171329,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2086","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magical Girl Angel Wing Flexible Mold | Epoxy Resin Silicone Mold | Kawaii Decoden Crafts | Clear Soft Mould | Mahou Kei Jewellery Making (17mm x 40mm)","public_title":null,"options":["Default Title"],"price":249,"weight":21,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2086.jpg?v=1517670303"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2086.jpg?v=1517670303","options":["Title"],"media":[{"alt":"Magical Girl Angel Wing Flexible Mold | Epoxy Resin Silicone Mold | Kawaii Decoden Crafts | Clear Soft Mould | Mahou Kei Jewellery Making (17mm x 40mm) - MiniatureSweet","id":362811719729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2086.jpg?v=1517670303"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2086.jpg?v=1517670303","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii angel wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.7cm (W) x 4cm (L) \/ 0.73\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Angel Wing Mold | Resin Cabochon Mold | Clear...
$2.29 USD
{"id":9931873153,"title":"Kawaii Angel Wing Mold | Resin Cabochon Mold | Clear Silicone Mold | Mahou Kei Decoden Craft Supplies | Fairy Kei Jewelry Making (20mm x 37mm)","handle":"kawaii-angel-wing-mold-resin-cabochon-mold-clear-silicone-mold-mahou-kei-decoden-craft-supplies-fairy-kei-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii angel wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2cm (W) x 3.7cm (L) \/ 0.8\" (W) x 1.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T22:27:54-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["Angel Wing Mold","angel wings","cabochon mold","cellphone decoration","clear mold","decoden supplies","embellishment mold","Fairy Kei","flexible mold","kawaii crafts","kawaii mold","magical girl","mahou kei","phone case deco","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36720000513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2085","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Angel Wing Mold | Resin Cabochon Mold | Clear Silicone Mold | Mahou Kei Decoden Craft Supplies | Fairy Kei Jewelry Making (20mm x 37mm)","public_title":null,"options":["Default Title"],"price":229,"weight":22,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2085.jpg?v=1517670301"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2085.jpg?v=1517670301","options":["Title"],"media":[{"alt":"Kawaii Angel Wing Mold | Resin Cabochon Mold | Clear Silicone Mold | Mahou Kei Decoden Craft Supplies | Fairy Kei Jewelry Making (20mm x 37mm) - MiniatureSweet","id":362810998833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2085.jpg?v=1517670301"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2085.jpg?v=1517670301","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii angel wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2cm (W) x 3.7cm (L) \/ 0.8\" (W) x 1.44\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Cat Mold | Kitty Cabochon Mold | Kitten Silic...
$1.99 USD
{"id":9931867265,"title":"Kawaii Cat Mold | Kitty Cabochon Mold | Kitten Silicone Mold | Flexible Animal Mold | Decoden Piece Making (48mm x 40mm)","handle":"kawaii-cat-mold-kitty-cabochon-mold-kitten-silicone-mold-flexible-animal-mold-decoden-piece-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.8cm (W) x 4cm (L) \/ 1.89\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T22:15:32-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","cellphone decoration","clear mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","pet mold","phone case deco","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36719868545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2084","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Cat Mold | Kitty Cabochon Mold | Kitten Silicone Mold | Flexible Animal Mold | Decoden Piece Making (48mm x 40mm)","public_title":null,"options":["Default Title"],"price":199,"weight":19,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2084.jpg?v=1517670299"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2084.jpg?v=1517670299","options":["Title"],"media":[{"alt":"Kawaii Cat Mold | Kitty Cabochon Mold | Kitten Silicone Mold | Flexible Animal Mold | Decoden Piece Making (48mm x 40mm) - MiniatureSweet","id":362810966065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2084.jpg?v=1517670299"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2084.jpg?v=1517670299","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.8cm (W) x 4cm (L) \/ 1.89\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Puffy Moon Mold | Crescent Moon Silicone Mold | Kawa...
$2.29 USD
{"id":9931861825,"title":"Puffy Moon Mold | Crescent Moon Silicone Mold | Kawaii Cabochon Mold | Magical Girl Decoden Supplies | Clear Flexible Mould (34mm x 40mm)","handle":"puffy-moon-mold-crescent-moon-silicone-mold-kawaii-cabochon-mold-magical-girl-decoden-supplies-clear-flexible-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii puffy moon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 4cm (L) \/ 1.34\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T22:06:36-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","cellphone decoration","clear mold","crescent moon","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","magical girl","mahou kei","moon cabochon","moon mold","phone case deco","puffy moon","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36719766401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2083","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Puffy Moon Mold | Crescent Moon Silicone Mold | Kawaii Cabochon Mold | Magical Girl Decoden Supplies | Clear Flexible Mould (34mm x 40mm)","public_title":null,"options":["Default Title"],"price":229,"weight":21,"compare_at_price":null,"inventory_quantity":36,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2083.jpg?v=1517670298"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2083.jpg?v=1517670298","options":["Title"],"media":[{"alt":"Puffy Moon Mold | Crescent Moon Silicone Mold | Kawaii Cabochon Mold | Magical Girl Decoden Supplies | Clear Flexible Mould (34mm x 40mm) - MiniatureSweet","id":362810900529,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2083.jpg?v=1517670298"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2083.jpg?v=1517670298","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii puffy moon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 4cm (L) \/ 1.34\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Puffy Star Mold | Flexible Resin Mold | Decod...
$2.29 USD
{"id":9931853825,"title":"Kawaii Puffy Star Mold | Flexible Resin Mold | Decoden Cabochon Making | Clear Silicone Mould (33mm x 32mm)","handle":"kawaii-puffy-star-mold-flexible-resin-mold-decoden-cabochon-making-clear-silicone-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii puffy star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.3cm (W) x 3.2cm (L) \/ 1.3\" (W) x 1.26\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T21:38:11-11:00","vendor":"MiniatureSweet","type":"Star Mold","tags":["cabochon mold","cellphone decoration","clear mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","magical girl","mahou kei","phone case deco","puffy star mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","star cabochons","star mold","UV resin"],"price":229,"price_min":229,"price_max":229,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36719460161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2082","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii Puffy Star Mold | Flexible Resin Mold | Decoden Cabochon Making | Clear Silicone Mould (33mm x 32mm)","public_title":null,"options":["Default Title"],"price":229,"weight":24,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2082.jpg?v=1517670296"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2082.jpg?v=1517670296","options":["Title"],"media":[{"alt":"Kawaii Puffy Star Mold | Flexible Resin Mold | Decoden Cabochon Making | Clear Silicone Mould (33mm x 32mm) - MiniatureSweet","id":362810736689,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2082.jpg?v=1517670296"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2082.jpg?v=1517670296","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii puffy star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.3cm (W) x 3.2cm (L) \/ 1.3\" (W) x 1.26\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin M...
$2.99 USD
{"id":9931849537,"title":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm)","handle":"oval-dome-cabochon-mold-5-cavity-soft-uv-resin-mold-silicone-flexible-mold-kawaii-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini oval dome cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3mm x 5.5mm, 4.5mm x 7.5mm, 6.5mm x 9mm, 8.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T21:18:42-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","dome cabochon","dome mold","embellishment mold","flexible mold","Gemstone Mold","kawaii crafts","kawaii mold","nail art","oval dome","oval gems","oval gemstones","oval mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36719230529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2081","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295","options":["Title"],"media":[{"alt":"Oval Dome Cabochon Mold (5 Cavity) | Soft UV Resin Mold | Silicone Flexible Mold | Kawaii Jewelry Making (5.5mm to 11mm) - MiniatureSweet","id":362810441777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2081.jpg?v=1517670295","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini oval dome cabochon silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3mm x 5.5mm, 4.5mm x 7.5mm, 6.5mm x 9mm, 8.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Small Puffy Heart Mold (3 Cavity) | Kawaii UV Resin ...
$2.99 USD
{"id":9931829377,"title":"Small Puffy Heart Mold (3 Cavity) | Kawaii UV Resin Mold | Flexible Silicone Mold | Clear Soft Mould | Embellishment Making (10mm to 15.5mm)","handle":"small-puffy-heart-mold-3-cavity-kawaii-uv-resin-mold-flexible-silicone-mold-clear-soft-mould-embellishment-making","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini puffy heart silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10mm x 8mm, 12.5mm x 10mm, 15.5mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T20:59:30-11:00","vendor":"MiniatureSweet","type":"Heart Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","heart mold","kawaii crafts","kawaii mold","love","nail art","Puffy Heart","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tiny mini mold","UV resin","valentine's day","wedding"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36718887233,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Small Puffy Heart Mold (3 Cavity) | Kawaii UV Resin Mold | Flexible Silicone Mold | Clear Soft Mould | Embellishment Making (10mm to 15.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":16,"compare_at_price":null,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2080.jpg?v=1517670294"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2080.jpg?v=1517670294","options":["Title"],"media":[{"alt":"Small Puffy Heart Mold (3 Cavity) | Kawaii UV Resin Mold | Flexible Silicone Mold | Clear Soft Mould | Embellishment Making (10mm to 15.5mm) - MiniatureSweet","id":362809819185,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2080.jpg?v=1517670294"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2080.jpg?v=1517670294","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini puffy heart silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 10mm x 8mm, 12.5mm x 10mm, 15.5mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini ...
$2.99 USD
{"id":9931819649,"title":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm)","handle":"rhombus-and-triangle-pyramid-mold-8-cavity-mini-geometry-mold-flexible-uv-resin-mold-clear-silicone-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini rhombus and triangle pyramid silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 6mm x 5mm, 8mm x 7mm, 10mm x 8mm\u003c\/p\u003e\n\u003cp\u003e- Rhombus: approx. 5mm x 8mm, 6mm x 9mm, 7mm x 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T20:36:35-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","nail art","Pyramid mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Rhombus mold","Silicone Mold","soft mold","tiny mini mold","triangle mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36718601345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2079","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292","options":["Title"],"media":[{"alt":"Rhombus and Triangle Pyramid Mold (8 Cavity) | Mini Geometry Mold | Flexible UV Resin Mold | Clear Silicone Mould (5mm to 11.5mm) - MiniatureSweet","id":362809720881,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2079.jpg?v=1517670292","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini rhombus and triangle pyramid silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Triangle: approx. 6mm x 5mm, 8mm x 7mm, 10mm x 8mm\u003c\/p\u003e\n\u003cp\u003e- Rhombus: approx. 5mm x 8mm, 6mm x 9mm, 7mm x 11.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Small Sakura Mold (3 Cavity) | Mini Cherry Blossom M...
$2.99 USD
{"id":9931511553,"title":"Small Sakura Mold (3 Cavity) | Mini Cherry Blossom Mold | Flower Silicone Mold | Flexible Floral Mould | Kawaii UV Resin Craft Supplies (8mm to 13.5mm)","handle":"small-sakura-mold-3-cavity-mini-cherry-blossom-mold-flower-silicone-mold-flexible-floral-mould-kawaii-uv-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini sakura \/ cherry blossom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 8mm x 7.5mm, 10mm x 9.5mm, 13.5mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T16:16:25-11:00","vendor":"MiniatureSweet","type":"Flower Mold, Mold Mix","tags":["cabochon mold","cherry blossom mold","clear mold","decoden supplies","embellishment mold","flexible mold","floral mold","flower mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sakura mold","Silicone Mold","soft mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36715136577,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2078","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Small Sakura Mold (3 Cavity) | Mini Cherry Blossom Mold | Flower Silicone Mold | Flexible Floral Mould | Kawaii UV Resin Craft Supplies (8mm to 13.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":8,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2078.jpg?v=1517670291"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2078.jpg?v=1517670291","options":["Title"],"media":[{"alt":"Small Sakura Mold (3 Cavity) | Mini Cherry Blossom Mold | Flower Silicone Mold | Flexible Floral Mould | Kawaii UV Resin Craft Supplies (8mm to 13.5mm) - MiniatureSweet","id":362782294065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2078.jpg?v=1517670291"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2078.jpg?v=1517670291","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini sakura \/ cherry blossom silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 8mm x 7.5mm, 10mm x 9.5mm, 13.5mm x 13mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Faceted Rhinestone and Mini Round Dome Flexible Mold...
$2.99 USD
{"id":9931505217,"title":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm)","handle":"faceted-rhinestone-and-mini-round-dome-flexible-mold-8-cavity-gemstone-mold-silicone-uv-resin-mold-clear-mould-kawaii-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini faceted rhinestone and round dome silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rhinestones: approx. 4.5mm, 5mm, 7mm, 8.5mm\u003c\/p\u003e\n\u003cp\u003e- Dome: approx. 5.5mm, 7mm, 8.5mm, 10mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T16:04:58-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","Faceted rhinestones","flexible mold","gem mold","Gemstone Mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","rhinestone mold","round dome mold","round rhinestone","Silicone Mold","soft mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36714946945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2077","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm)","public_title":null,"options":["Default Title"],"price":299,"weight":11,"compare_at_price":null,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289","options":["Title"],"media":[{"alt":"Faceted Rhinestone and Mini Round Dome Flexible Mold (8 Cavity) | Gemstone Mold | Silicone UV Resin Mold | Clear Mould | Kawaii Crafts (4.5mm to 10mm) - MiniatureSweet","id":362781900849,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2077.jpg?v=1517670289","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini faceted rhinestone and round dome silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Rhinestones: approx. 4.5mm, 5mm, 7mm, 8.5mm\u003c\/p\u003e\n\u003cp\u003e- Dome: approx. 5.5mm, 7mm, 8.5mm, 10mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Si...
$2.99 USD
{"id":9931499201,"title":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm)","handle":"mini-teardrop-flexible-mold-6-cavity-uv-resin-silicone-mold-small-cabochon-mold-kawaii-soft-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5mm x 5.5mm, 5mm x 7mm, 5mm x 9mm, 7mm x 11mm, 10mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T15:49:59-11:00","vendor":"MiniatureSweet","type":"Teardrop Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tear drop mold","teardrop mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36714767809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2076","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287","options":["Title"],"media":[{"alt":"Mini Teardrop Flexible Mold (6 Cavity) | UV Resin Silicone Mold | Small Cabochon Mold | Kawaii Soft Mould (5.5mm to 15mm) - MiniatureSweet","id":362781835313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2076.jpg?v=1517670287","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini teardrop silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5mm x 5.5mm, 5mm x 7mm, 5mm x 9mm, 7mm x 11mm, 10mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Small UV Resin Mold | Eiffel Tower Flexible Mold (3 ...
$2.99 USD
{"id":9931488513,"title":"Small UV Resin Mold | Eiffel Tower Flexible Mold (3 Cavity) | Kawaii Silicone Mould | Travel Embellishment DIY | Clear Soft Mold (10mm to 15mm)","handle":"small-uv-resin-mold-eiffel-tower-flexible-mold-3-cavity-kawaii-silicone-mould-travel-embellishment-diy-clear-soft-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini Eiffel tower silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm x 10mm, 10mm x 12mm, 12mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T15:28:18-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","Eiffel Tower Mold","embellishment mold","flexible mold","France mold","French mold","kawaii crafts","kawaii mold","nail art","paris mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tiny mini mold","travel mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36714526465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2075","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Small UV Resin Mold | Eiffel Tower Flexible Mold (3 Cavity) | Kawaii Silicone Mould | Travel Embellishment DIY | Clear Soft Mold (10mm to 15mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2075.jpg?v=1517670286"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2075.jpg?v=1517670286","options":["Title"],"media":[{"alt":"Small UV Resin Mold | Eiffel Tower Flexible Mold (3 Cavity) | Kawaii Silicone Mould | Travel Embellishment DIY | Clear Soft Mold (10mm to 15mm) - MiniatureSweet","id":362781343793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2075.jpg?v=1517670286"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2075.jpg?v=1517670286","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini Eiffel tower silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 9mm x 10mm, 10mm x 12mm, 12mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Tiny Mini Strawberry Silicone Mold (6 Cavity) | Flex...
$2.99 USD
{"id":9929768065,"title":"Tiny Mini Strawberry Silicone Mold (6 Cavity) | Flexible Fruit Mold | Kawaii Mold | UV Resin Craft Supplies (7.5mm to 14mm)","handle":"tiny-mini-strawberry-silicone-mold-6-cavity-flexible-fruit-mold-kawaii-mold-uv-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5mm x 7.5mm, 5.5mm x 9.5mm, 8mm x 14mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T02:25:18-11:00","vendor":"MiniatureSweet","type":"Fruit Mold, Mold Mix","tags":["cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","food mold","fruit mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","strawberry mold","tiny mini mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36703982273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2074","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tiny Mini Strawberry Silicone Mold (6 Cavity) | Flexible Fruit Mold | Kawaii Mold | UV Resin Craft Supplies (7.5mm to 14mm)","public_title":null,"options":["Default Title"],"price":299,"weight":10,"compare_at_price":null,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2074.jpg?v=1517670284"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2074.jpg?v=1517670284","options":["Title"],"media":[{"alt":"Tiny Mini Strawberry Silicone Mold (6 Cavity) | Flexible Fruit Mold | Kawaii Mold | UV Resin Craft Supplies (7.5mm to 14mm) - MiniatureSweet","id":362711416881,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2074.jpg?v=1517670284"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2074.jpg?v=1517670284","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.5mm x 7.5mm, 5.5mm x 9.5mm, 8mm x 14mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Silicone Anchor Mold (3 Cavity) | Flexible Nautical ...
$2.99 USD
{"id":9929748289,"title":"Silicone Anchor Mold (3 Cavity) | Flexible Nautical Mold | Tiny Mini UV Resin Mold | Kawaii Soft Mould (11mm to 15mm)","handle":"silicone-anchor-mold-3-cavity-flexible-nautical-mold-tiny-mini-uv-resin-mold-kawaii-soft-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini anchor silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 11mm x 11mm, 12mm x 13mm, 14mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T02:15:33-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Mold Mix","tags":["anchor mold","boat","cabochon mold","clear mold","cruise","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","nail art","nautical mold","ocean","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea","ship","Silicone Mold","soft mold","UV resin","yacht"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36703888129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2073","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Silicone Anchor Mold (3 Cavity) | Flexible Nautical Mold | Tiny Mini UV Resin Mold | Kawaii Soft Mould (11mm to 15mm)","public_title":null,"options":["Default Title"],"price":299,"weight":9,"compare_at_price":null,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2073.jpg?v=1517670283"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2073.jpg?v=1517670283","options":["Title"],"media":[{"alt":"Silicone Anchor Mold (3 Cavity) | Flexible Nautical Mold | Tiny Mini UV Resin Mold | Kawaii Soft Mould (11mm to 15mm) - MiniatureSweet","id":362710564913,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2073.jpg?v=1517670283"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2073.jpg?v=1517670283","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini anchor silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 11mm x 11mm, 12mm x 13mm, 14mm x 15mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Tiny Mini Bear Toy Flexible Mold (5 Cavity) | Animal...
Sold Out
{"id":9929717057,"title":"Tiny Mini Bear Toy Flexible Mold (5 Cavity) | Animal Mold | Kawaii UV Resin Silicone Mold | Clear Soft Mould (7mm to 11mm)","handle":"tiny-mini-bear-toy-flexible-mold-5-cavity-animal-mold-kawaii-uv-resin-silicone-mold-clear-soft-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini bear toy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm x 7mm, 8mm x 9mm, 8.5mm x 10mm, 9.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-22T02:00:51-11:00","vendor":"MiniatureSweet","type":"Animal Mold, Mold Mix","tags":["animal mold","bear mold","bear toy","cabochon mold","clear mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","teddy bear","UV resin"],"price":299,"price_min":299,"price_max":299,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36703728769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2072","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Tiny Mini Bear Toy Flexible Mold (5 Cavity) | Animal Mold | Kawaii UV Resin Silicone Mold | Clear Soft Mould (7mm to 11mm)","public_title":null,"options":["Default Title"],"price":299,"weight":13,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2072.jpg?v=1517670281"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2072.jpg?v=1517670281","options":["Title"],"media":[{"alt":"Tiny Mini Bear Toy Flexible Mold (5 Cavity) | Animal Mold | Kawaii UV Resin Silicone Mold | Clear Soft Mould (7mm to 11mm) - MiniatureSweet","id":362708238385,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2072.jpg?v=1517670281"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2072.jpg?v=1517670281","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini bear toy silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm x 7mm, 8mm x 9mm, 8.5mm x 10mm, 9.5mm x 11mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Mini Cross Silicone Mold (4 Cavity) | Flexible UV Re...
$2.99 USD
{"id":9929007489,"title":"Mini Cross Silicone Mold (4 Cavity) | Flexible UV Resin Mould | Tiny Clear Mold | Kawaii Craft Supplies | Nail Art Mold (7.5mm to 10.5mm)","handle":"mini-cross-silicone-mold-4-cavity-flexible-uv-resin-mould-tiny-clear-mold-kawaii-craft-supplies-nail-art-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm x 7.5mm, 7.5mm x 9.5mm, 8mm x 10.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-21T23:45:45-11:00","vendor":"MiniatureSweet","type":"Christmas Mold, Mold Mix","tags":["cabochon mold","Catholic","christian","clear mold","cross mold","decoden supplies","embellishment mold","flexible mold","kawaii crafts","kawaii mold","nail art","religion","religious","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36701024897,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2071","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Cross Silicone Mold (4 Cavity) | Flexible UV Resin Mould | Tiny Clear Mold | Kawaii Craft Supplies | Nail Art Mold (7.5mm to 10.5mm)","public_title":null,"options":["Default Title"],"price":299,"weight":9,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2071.jpg?v=1517670280"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2071.jpg?v=1517670280","options":["Title"],"media":[{"alt":"Mini Cross Silicone Mold (4 Cavity) | Flexible UV Resin Mould | Tiny Clear Mold | Kawaii Craft Supplies | Nail Art Mold (7.5mm to 10.5mm) - MiniatureSweet","id":362679861297,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2071.jpg?v=1517670280"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2071.jpg?v=1517670280","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eTiny mini cross silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm x 7.5mm, 7.5mm x 9.5mm, 8mm x 10.5mm\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Starfish Mold | Sea Life Flexible Mold | Marine Life...
$2.59 USD
{"id":9928905473,"title":"Starfish Mold | Sea Life Flexible Mold | Marine Life Mold | Silicone Resin Mold | Kawaii Cabochon Mold (40mm x 50mm)","handle":"starfish-mold-sea-life-flexible-mold-marine-life-mold-silicone-resin-mold-kawaii-cabochon-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eStarfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 5cm (L) \/ 1.57\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-21T23:25:02-11:00","vendor":"MiniatureSweet","type":"Nautical Mold","tags":["beach decor","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","marine life","ocean life","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Sea Life","Silicone Mold","soft mold","star fish mold","starfish mold","UV resin"],"price":259,"price_min":259,"price_max":259,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36700703425,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1134","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Starfish Mold | Sea Life Flexible Mold | Marine Life Mold | Silicone Resin Mold | Kawaii Cabochon Mold (40mm x 50mm)","public_title":null,"options":["Default Title"],"price":259,"weight":25,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1134.jpg?v=1517670278"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1134.jpg?v=1517670278","options":["Title"],"media":[{"alt":"Starfish Mold | Sea Life Flexible Mold | Marine Life Mold | Silicone Resin Mold | Kawaii Cabochon Mold (40mm x 50mm) - MiniatureSweet","id":362674323505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1134.jpg?v=1517670278"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1134.jpg?v=1517670278","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eStarfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 5cm (L) \/ 1.57\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Butterfly Wing Mold | Insect Mold | UV Resin Soft Mo...
Sold Out
{"id":9928851841,"title":"Butterfly Wing Mold | Insect Mold | UV Resin Soft Mold | Epoxy Resin Jewelry Making | Flexible Silicone Mould (25mm x 45mm)","handle":"butterfly-wing-mold-insect-mold-uv-resin-soft-mold-epoxy-resin-jewelry-making-flexible-silicone-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful butterfly wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.5cm (W) x 4.5cm (L) \/ 0.98\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-21T23:14:28-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["butterfly mold","butterfly wing","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","insect mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36700548929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1133","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Butterfly Wing Mold | Insect Mold | UV Resin Soft Mold | Epoxy Resin Jewelry Making | Flexible Silicone Mould (25mm x 45mm)","public_title":null,"options":["Default Title"],"price":149,"weight":7,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1133.jpg?v=1517670277"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1133.jpg?v=1517670277","options":["Title"],"media":[{"alt":"Butterfly Wing Mold | Insect Mold | UV Resin Soft Mold | Epoxy Resin Jewelry Making | Flexible Silicone Mould (25mm x 45mm) - MiniatureSweet","id":362671341617,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1133.jpg?v=1517670277"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1133.jpg?v=1517670277","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful butterfly wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.5cm (W) x 4.5cm (L) \/ 0.98\" (W) x 1.77\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Butterfly Wing Silicone Mold | Flexible Epoxy Resin ...
$1.49 USD
{"id":9928764033,"title":"Butterfly Wing Silicone Mold | Flexible Epoxy Resin Mould | Insect Mold | UV Resin Craft Supplies | Clear Soft Mold (25mm x 40mm)","handle":"butterfly-wing-silicone-mold-flexible-epoxy-resin-mould-insect-mold-uv-resin-craft-supplies-clear-soft-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful butterfly wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.5cm (W) x 4cm (L) \/ 0.98\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-21T22:54:57-11:00","vendor":"MiniatureSweet","type":"Insect Mold","tags":["butterfly mold","butterfly wing","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","insect mold","kawaii crafts","kawaii mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin"],"price":149,"price_min":149,"price_max":149,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36700234113,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1132","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Butterfly Wing Silicone Mold | Flexible Epoxy Resin Mould | Insect Mold | UV Resin Craft Supplies | Clear Soft Mold (25mm x 40mm)","public_title":null,"options":["Default Title"],"price":149,"weight":8,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1132.jpg?v=1517670275"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1132.jpg?v=1517670275","options":["Title"],"media":[{"alt":"Butterfly Wing Silicone Mold | Flexible Epoxy Resin Mould | Insect Mold | UV Resin Craft Supplies | Clear Soft Mold (25mm x 40mm) - MiniatureSweet","id":362667442225,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1132.jpg?v=1517670275"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1132.jpg?v=1517670275","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful butterfly wing silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.5cm (W) x 4cm (L) \/ 0.98\" (W) x 1.57\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Miniature Goldfish Silicone Mold (5 Cavity) | Flexib...
$1.29 USD
{"id":9928685441,"title":"Miniature Goldfish Silicone Mold (5 Cavity) | Flexible Fish Mould | Epoxy Resin Art | Clear UV Resin Mold (6mm to 11mm)","handle":"miniature-goldfish-silicone-mold-5-cavity-flexible-fish-mould-epoxy-resin-art-clear-uv-resin-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMiniature goldfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm, 8mm, 9mm, 10mm \u0026amp; 11mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-07-21T22:23:06-11:00","vendor":"MiniatureSweet","type":"Fish Mold, Mold Mix","tags":["animal mold","cabochon mold","clear mold","decoden supplies","dollhouse goldfish","embellishment mold","epoxy resin","fish mold","flexible mold","goldfish mold","kawaii crafts","kawaii mold","little goldfish","mini goldfish","miniature goldfish","nail art","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","tiny goldfish","UV resin"],"price":129,"price_min":129,"price_max":129,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36699801217,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1131","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Miniature Goldfish Silicone Mold (5 Cavity) | Flexible Fish Mould | Epoxy Resin Art | Clear UV Resin Mold (6mm to 11mm)","public_title":null,"options":["Default Title"],"price":129,"weight":9,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1131.jpg?v=1517670274"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1131.jpg?v=1517670274","options":["Title"],"media":[{"alt":"Miniature Goldfish Silicone Mold (5 Cavity) | Flexible Fish Mould | Epoxy Resin Art | Clear UV Resin Mold (6mm to 11mm) - MiniatureSweet","id":362656989233,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1131.jpg?v=1517670274"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1131.jpg?v=1517670274","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eMiniature goldfish silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 6mm, 8mm, 9mm, 10mm \u0026amp; 11mm (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball M...
$6.99 USD
{"id":9757152641,"title":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm)","handle":"hollow-dome-silicone-mold-2-cavity-hollow-ball-mold-flexible-half-sphere-mold-uv-resin-mold-shaker-charm-making-clear-soft-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2.5cm (Diameter) x 1.25cm (Depth) \/ 0.98\" (Diameter) x 0.49\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 2.2cm (Diameter) x 1.1cm (Depth) \/ 0.86\" (Diameter) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T18:53:08-11:00","vendor":"MiniatureSweet","type":"Round Mold, Mold Mix, Shaker Mold","tags":["3d mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","half sphere mold","hollow ball mold","hollow dome mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","round dome mold","shaker charm","Silicone Mold","soft mold","UV resin"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36002532929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2070","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm)","public_title":null,"options":["Default Title"],"price":699,"weight":44,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","options":["Title"],"media":[{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328080031793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328079966257,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-02.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":328079933489,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2070-03.jpg?v=1517670459","width":600},{"alt":"Hollow Dome Silicone Mold (2 Cavity) | Hollow Ball Mold | Flexible Half Sphere Mold | UV Resin Mold | Shaker Charm Making | Clear Soft Mold (22mm \u0026 25mm) - MiniatureSweet","id":365817823281,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2104-02_866c226d-5289-46bf-8bd3-5614ade31660.jpg?v=1517670459","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eHollow dome silicone mold in 2 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003eYou can use it with our round base and pendant bail molds (\u003ca href=\"https:\/\/goo.gl\/A85znR\" target=\"_blank\" title=\"Round Base \u0026amp; Pendant Bail Silicone Mold\" rel=\"noopener noreferrer\"\u003ehttps:\/\/goo.gl\/A85znR\u003c\/a\u003e) to make shaker charm as shown in the 4th picture.\u003c\/p\u003e\n\u003cp\u003e*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.\u003c\/p\u003e\n\u003cp\u003e**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a \u003ca href=\"https:\/\/www.miniaturesweethk.com\/search?type=product\u0026amp;q=silicone+mat\" target=\"_blank\" title=\"Silicone Mat\" rel=\"noopener noreferrer\"\u003esilicone mat\u003c\/a\u003e underneath. (If you fill the mold with little amount of resin, it will create gap \/ bubbles)\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Big dome: approx. 2.5cm (Diameter) x 1.25cm (Depth) \/ 0.98\" (Diameter) x 0.49\" (Depth)\u003c\/p\u003e\n\u003cp\u003e- Small dome: approx. 2.2cm (Diameter) x 1.1cm (Depth) \/ 0.86\" (Diameter) x 0.43\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o3-eMaX6DZc\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/picy1lw_nnk\" allowfullscreen=\"\" frameborder=\"0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
3D Strawberry Silicone Mold | UV Resin Soft Mold | F...
$3.99 USD
{"id":9757069121,"title":"3D Strawberry Silicone Mold | UV Resin Soft Mold | Flexible Fruit Mold | Epoxy Resin Mould | Kawaii Jewelry Making (21mm x 30mm)","handle":"3d-strawberry-silicone-mold-uv-resin-soft-mold-flexible-fruit-mold-epoxy-resin-mould-kawaii-jewelry-making","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii 3D strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.1cm (W) x 3cm (L) x 2cm (D) \/ 0.85\" (W) x 1.17\" (L) x 0.79 (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/PrfVs346V34\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T18:17:52-11:00","vendor":"MiniatureSweet","type":"Fruit Mold","tags":["3d mold","3d strawberry mold","cabochon mold","Clear Mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","food mold","fruit mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","Soft Mold","UV resin"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36002179265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2069","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D Strawberry Silicone Mold | UV Resin Soft Mold | Flexible Fruit Mold | Epoxy Resin Mould | Kawaii Jewelry Making (21mm x 30mm)","public_title":null,"options":["Default Title"],"price":399,"weight":22,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069.jpg?v=1517669845","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-02.jpg?v=1517669845","\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-03.jpg?v=1517669845"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069.jpg?v=1517669845","options":["Title"],"media":[{"alt":"3D Strawberry Silicone Mold | UV Resin Soft Mold | Flexible Fruit Mold | Epoxy Resin Mould | Kawaii Jewelry Making (21mm x 30mm) - MiniatureSweet","id":328046739505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069.jpg?v=1517669845"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069.jpg?v=1517669845","width":600},{"alt":"3D Strawberry Silicone Mold | UV Resin Soft Mold | Flexible Fruit Mold | Epoxy Resin Mould | Kawaii Jewelry Making (21mm x 30mm) - MiniatureSweet","id":328046673969,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-02.jpg?v=1517669845"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-02.jpg?v=1517669845","width":600},{"alt":"3D Strawberry Silicone Mold | UV Resin Soft Mold | Flexible Fruit Mold | Epoxy Resin Mould | Kawaii Jewelry Making (21mm x 30mm) - MiniatureSweet","id":328046641201,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-03.jpg?v=1517669845"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2069-03.jpg?v=1517669845","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii 3D strawberry silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.1cm (W) x 3cm (L) x 2cm (D) \/ 0.85\" (W) x 1.17\" (L) x 0.79 (D)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/PrfVs346V34\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Skeleton Key Silicone Mold (5 Cavity) | Antique Door...
$4.99 USD
{"id":9757009153,"title":"Skeleton Key Silicone Mold (5 Cavity) | Antique Door Key Mold | Vintage Key Mould | Epoxy Resin Mold (52mm to 79mm)","handle":"skeleton-key-silicone-mold-5-cavity-antique-door-key-mold-vintage-key-mould-epoxy-resin-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted skeleton key silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.2cm to 7.9cm (L) \/ 2.05\" to 3.11\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T17:58:32-11:00","vendor":"MiniatureSweet","type":"Other Mold, Mold Mix","tags":["antique keys","cabochon mold","decoden supplies","door key","embellishment mold","epoxy resin","filigree key","flexible mold","kawaii crafts","kawaii mold","key mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","Skeleton Key","victorian key","vintage key"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36001972481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2068","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skeleton Key Silicone Mold (5 Cavity) | Antique Door Key Mold | Vintage Key Mould | Epoxy Resin Mold (52mm to 79mm)","public_title":null,"options":["Default Title"],"price":499,"weight":90,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2068.jpg?v=1517669840"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2068.jpg?v=1517669840","options":["Title"],"media":[{"alt":"Skeleton Key Silicone Mold (5 Cavity) | Antique Door Key Mold | Vintage Key Mould | Epoxy Resin Mold (52mm to 79mm) - MiniatureSweet","id":328009154609,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2068.jpg?v=1517669840"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2068.jpg?v=1517669840","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eAssorted skeleton key silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.2cm to 7.9cm (L) \/ 2.05\" to 3.11\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Unicorn Mold | Horse Silicone Mold | Epoxy Resin Sup...
$4.49 USD
{"id":9756963009,"title":"Unicorn Mold | Horse Silicone Mold | Epoxy Resin Supplies | Animal Cabochon Mold | UV Resin Crafts (70mm x 50mm)","handle":"unicorn-mold-horse-silicone-mold-epoxy-resin-supplies-animal-cabochon-mold-uv-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful unicorn silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7cm (W) x 5cm (L) \/ 2.76\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T17:45:09-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","horse mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","unicorn mold","UV resin"],"price":449,"price_min":449,"price_max":449,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36001803841,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2067","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Unicorn Mold | Horse Silicone Mold | Epoxy Resin Supplies | Animal Cabochon Mold | UV Resin Crafts (70mm x 50mm)","public_title":null,"options":["Default Title"],"price":449,"weight":64,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2067.jpg?v=1517669838"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2067.jpg?v=1517669838","options":["Title"],"media":[{"alt":"Unicorn Mold | Horse Silicone Mold | Epoxy Resin Supplies | Animal Cabochon Mold | UV Resin Crafts (70mm x 50mm) - MiniatureSweet","id":327987462193,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2067.jpg?v=1517669838"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2067.jpg?v=1517669838","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eBeautiful unicorn silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 7cm (W) x 5cm (L) \/ 2.76\" (W) x 1.97\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Christmas Tree Mold | Epoxy Resin Mold | UV Resin Mo...
$1.39 USD
{"id":9756912513,"title":"Christmas Tree Mold | Epoxy Resin Mold | UV Resin Mold | Kawaii Cabochon Mould | Silicone Soft Mold (35mm x 48mm)","handle":"christmas-tree-mold-epoxy-resin-mold-uv-resin-mold-kawaii-cabochon-mould-silicone-soft-mold","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLovely Christmas tree silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm (W) x 4.8cm (L) \/ 1.38\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T17:28:41-11:00","vendor":"MiniatureSweet","type":"Christmas Mold","tags":["cabochon mold","christmas tree mold","clear mold","decoden supplies","embellishment mold","epoxy resin","festival","flexible mold","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","soft mold","UV resin","winter holiday"],"price":139,"price_min":139,"price_max":139,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36001591361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD2066","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Christmas Tree Mold | Epoxy Resin Mold | UV Resin Mold | Kawaii Cabochon Mould | Silicone Soft Mold (35mm x 48mm)","public_title":null,"options":["Default Title"],"price":139,"weight":14,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2066.jpg?v=1517669837"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2066.jpg?v=1517669837","options":["Title"],"media":[{"alt":"Christmas Tree Mold | Epoxy Resin Mold | UV Resin Mold | Kawaii Cabochon Mould | Silicone Soft Mold (35mm x 48mm) - MiniatureSweet","id":327957643313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2066.jpg?v=1517669837"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD2066.jpg?v=1517669837","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLovely Christmas tree silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.5cm (W) x 4.8cm (L) \/ 1.38\" (W) x 1.89\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mo...
$1.99 USD
$1.59 USD
{"id":9756720705,"title":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm)","handle":"crown-silicone-mold-epoxy-resin-flexible-mould-decoden-cabochon-mold-kawaii-embellishment-making","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 2.3cm (L) \/ 1.34\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:28:19-11:00","vendor":"MiniatureSweet","type":"Crown Mold","tags":["cabochon mold","clear mold","crown mold","crown with heart","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","king","princess","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":36000801985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1130","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm)","public_title":null,"options":["Default Title"],"price":159,"weight":18,"compare_at_price":199,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835","options":["Title"],"media":[{"alt":"DEFECT Crown Silicone Mold | Epoxy Resin Flexible Mould | Decoden Cabochon Mold | Kawaii Embellishment Making (34mm x 23mm) - MiniatureSweet","id":327846330417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1130.jpg?v=1517669835","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute crown silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 2.3cm (L) \/ 1.34\" (W) x 0.91\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Ribbon and Happy Face Star Flexible Mold (2 Cavity) ...
$1.99 USD
{"id":9756683265,"title":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies","handle":"ribbon-and-happy-face-star-flexible-mold-2-cavity-epoxy-resin-silicone-mold-kawaii-resin-cabochon-mold-decoden-supplies","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute ribbon and happy face star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.6cm (W) x 1.9cm (L) \/ 1.02\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.3cm (W) x 1.3cm (L) \/ 0.51\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:19:04-11:00","vendor":"MiniatureSweet","type":"Ribbon Mold, Star Mold, Mold Mix","tags":["bow mold","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","happy face","kawaii crafts","kawaii mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","ribbon mold","Silicone Mold","star mold","UV resin"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36000670913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1129","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies","public_title":null,"options":["Default Title"],"price":199,"weight":16,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964","options":["Title"],"media":[{"alt":"Ribbon and Happy Face Star Flexible Mold (2 Cavity) | Epoxy Resin Silicone Mold | Kawaii Resin Cabochon Mold | Decoden Supplies - MiniatureSweet","id":327828996145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1129.jpg?v=1547743964","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute ribbon and happy face star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Ribbon: approx. 2.6cm (W) x 1.9cm (L) \/ 1.02\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.3cm (W) x 1.3cm (L) \/ 0.51\" (W) x 0.51\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
DEFECT Seashell and Star Silicone Mold (2 Cavity) | ...
$1.99 USD
$1.59 USD
{"id":9756596993,"title":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies","handle":"seashell-and-star-silicone-mold-2-cavity-magical-mermaid-cabochon-making-epoxy-resin-mould-soft-mold-kawaii-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute seashell and star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell: approx. 2.4cm (W) x 2.4cm (L) \/ 0.94\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm (W) x 1.9cm (L) \/ 0.75\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T16:01:04-11:00","vendor":"MiniatureSweet","type":"Nautical Mold, Star Mold, Mold Mix","tags":["beach","cabochon mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","magical girl","mermaid","ocean","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","sea","sea shell mold","seashell mold","Silicone Mold","star mold","UV resin"],"price":159,"price_min":159,"price_max":159,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":36000452993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1128","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies","public_title":null,"options":["Default Title"],"price":159,"weight":16,"compare_at_price":199,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832","options":["Title"],"media":[{"alt":"DEFECT Seashell and Star Silicone Mold (2 Cavity) | Magical Mermaid Cabochon Making | Epoxy Resin Mould | Soft Mold | Kawaii Craft Supplies - MiniatureSweet","id":327795605553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1128.jpg?v=1517669832","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eCute seashell and star silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e***Note that this item comes with tiny defect, so the price is reduced from US$1.99 to US$1.59***\u003c\/p\u003e\n\u003cp\u003e★ Measurement:\u003c\/p\u003e\n\u003cp\u003e- Seashell: approx. 2.4cm (W) x 2.4cm (L) \/ 0.94\" (W) x 0.94\" (L)\u003c\/p\u003e\n\u003cp\u003e- Star: approx. 1.9cm (W) x 1.9cm (L) \/ 0.75\" (W) x 0.75\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Cloud Silicone Mold | UV Resin Charm Mold | Kawaii J...
Sold Out
{"id":9753659969,"title":"Cloud Silicone Mold | UV Resin Charm Mold | Kawaii Jewellery Mould | Clear Flexible Mold | Epoxy Resin Craft Supplies (37mm x 31mm)","handle":"cloud-silicone-mold-uv-resin-charm-mold-kawaii-jewellery-mould-clear-flexible-mold-epoxy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cloud charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.7cm (W) x 3.1cm (L) \/ 1.46\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T02:24:33-11:00","vendor":"MiniatureSweet","type":"Other Mold","tags":["cabochon mold","charm mold","clear mold","cloud mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","pendant mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":119,"price_min":119,"price_max":119,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35989078593,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1127","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cloud Silicone Mold | UV Resin Charm Mold | Kawaii Jewellery Mould | Clear Flexible Mold | Epoxy Resin Craft Supplies (37mm x 31mm)","public_title":null,"options":["Default Title"],"price":119,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1127.jpg?v=1517669831"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1127.jpg?v=1517669831","options":["Title"],"media":[{"alt":"Cloud Silicone Mold | UV Resin Charm Mold | Kawaii Jewellery Mould | Clear Flexible Mold | Epoxy Resin Craft Supplies (37mm x 31mm) - MiniatureSweet","id":326737362993,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1127.jpg?v=1517669831"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1127.jpg?v=1517669831","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cloud charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.7cm (W) x 3.1cm (L) \/ 1.46\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Rectangle Pendant Mold | Rectangular Charm Mould | E...
Sold Out
{"id":9753653121,"title":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm)","handle":"rectangle-pendant-mold-rectangular-charm-mould-epoxy-resin-jewellery-mold-clear-silicone-mould-uv-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRectangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.4cm (W) x 4.9cm (L) \/ 0.94\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T02:17:14-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["cabochon mold","charm mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","pendant mold","rectangle","rectangle charm","rectangle mold","rectangular mold","Rectangular pendant","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Shape Mold","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35989059713,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1126","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm)","public_title":null,"options":["Default Title"],"price":99,"weight":10,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829","options":["Title"],"media":[{"alt":"Rectangle Pendant Mold | Rectangular Charm Mould | Epoxy Resin Jewellery Mold | Clear Silicone Mould | UV Resin Craft Supplies (24mm x 49mm) - MiniatureSweet","id":326737199153,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1126.jpg?v=1517669829","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eRectangle charm silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 2.4cm (W) x 4.9cm (L) \/ 0.94\" (W) x 1.93\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Long Rectangular Bar Mold | Rectangle Charm Mold | C...
Sold Out
{"id":9753626945,"title":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","handle":"long-rectangular-bar-mold-rectangle-charm-mold-clear-uv-resin-jewelry-mold-flexible-silicone-mould-epoxy-resin-art","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:57:05-11:00","vendor":"MiniatureSweet","type":"Shape Mold","tags":["bar pendant","cabochon mold","charm mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","geometric mold","geometry mold","kawaii crafts","kawaii mold","long bar mold","pendant mold","rectangle","rectangle charm","rectangle mold","rectangular mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Shape Mold","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988833089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1125","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm)","public_title":null,"options":["Default Title"],"price":99,"weight":8,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","options":["Title"],"media":[{"alt":"Long Rectangular Bar Mold | Rectangle Charm Mold | Clear UV Resin Jewelry Mold | Flexible Silicone Mould | Epoxy Resin Art (13mm x 51mm) - MiniatureSweet","id":326737002545,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1125.jpg?v=1517669828","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eLong rectangular bar silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 1.3cm (W) x 5.1cm (L) \/ 0.51\" (W) x 2.01\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Kitten Silicone Mold | Cat Mould | Clear UV R...
Sold Out
{"id":9753613889,"title":"Kawaii Kitten Silicone Mold | Cat Mould | Clear UV Resin Mold | Flexible Cabochon Mold | Epoxy Resin Craft (43mm x 27mm)","handle":"kawaii-kitten-silicone-mold-cat-mould-clear-uv-resin-mold-flexible-cabochon-mold-epoxy-resin-craft","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3cm (W) x 2.7cm (L) \/ 1.69\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:45:12-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988715521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1124","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Kitten Silicone Mold | Cat Mould | Clear UV Resin Mold | Flexible Cabochon Mold | Epoxy Resin Craft (43mm x 27mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1124.jpg?v=1517669826"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1124.jpg?v=1517669826","options":["Title"],"media":[{"alt":"Kawaii Kitten Silicone Mold | Cat Mould | Clear UV Resin Mold | Flexible Cabochon Mold | Epoxy Resin Craft (43mm x 27mm) - MiniatureSweet","id":326736969777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1124.jpg?v=1517669826"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1124.jpg?v=1517669826","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4.3cm (W) x 2.7cm (L) \/ 1.69\" (W) x 1.06\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Cat Silicone Mold | UV Resin Soft Mold | Decoden Cab...
$0.99 USD
{"id":9753605505,"title":"Cat Silicone Mold | UV Resin Soft Mold | Decoden Cabochon Making | Flexible Kitty Mold | Clear Epoxy Resin Mould (50mm x 25mm)","handle":"cat-silicone-mold-uv-resin-soft-mold-decoden-cabochon-making-flexible-kitty-mold-clear-epoxy-resin-mould","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 2.5cm (L) \/ 1.97\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:37:08-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988627265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1123","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cat Silicone Mold | UV Resin Soft Mold | Decoden Cabochon Making | Flexible Kitty Mold | Clear Epoxy Resin Mould (50mm x 25mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1123.jpg?v=1517669825"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1123.jpg?v=1517669825","options":["Title"],"media":[{"alt":"Cat Silicone Mold | UV Resin Soft Mold | Decoden Cabochon Making | Flexible Kitty Mold | Clear Epoxy Resin Mould (50mm x 25mm) - MiniatureSweet","id":326736937009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1123.jpg?v=1517669825"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1123.jpg?v=1517669825","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5cm (W) x 2.5cm (L) \/ 1.97\" (W) x 0.98\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kitten Mold | Decoden Cabochon Mold | Cat Flexible M...
Sold Out
{"id":9753600705,"title":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm)","handle":"kitten-mold-decoden-cabochon-mold-cat-flexible-mold-soft-clear-mould-epoxy-resin-silicone-mould-uv-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:30:10-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988565121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1122","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823","options":["Title"],"media":[{"alt":"Kitten Mold | Decoden Cabochon Mold | Cat Flexible Mold | Soft Clear Mould | Epoxy Resin Silicone Mould | UV Resin Crafts (40mm x 21mm) - MiniatureSweet","id":326736904241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1122.jpg?v=1517669823","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.1cm (L) \/ 1.57\" (W) x 0.83\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Cat Mold | Kitty Cabochon Mold | UV Resin Silicone M...
Sold Out
{"id":9753595969,"title":"Cat Mold | Kitty Cabochon Mold | UV Resin Silicone Mold | Clear Soft Mould | Flexible Animal Mold | Epoxy Resin Crafts (54mm x 22mm)","handle":"cat-mold-kitty-cabochon-mold-uv-resin-silicone-mold-clear-soft-mould-flexible-animal-mold-epoxy-resin-crafts","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.4cm (W) x 2.2cm (L) \/ 2.13\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-25T01:24:22-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35988508609,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1121","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cat Mold | Kitty Cabochon Mold | UV Resin Silicone Mold | Clear Soft Mould | Flexible Animal Mold | Epoxy Resin Crafts (54mm x 22mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1121.jpg?v=1517669822"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1121.jpg?v=1517669822","options":["Title"],"media":[{"alt":"Cat Mold | Kitty Cabochon Mold | UV Resin Silicone Mold | Clear Soft Mould | Flexible Animal Mold | Epoxy Resin Crafts (54mm x 22mm) - MiniatureSweet","id":326736838705,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1121.jpg?v=1517669822"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1121.jpg?v=1517669822","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 5.4cm (W) x 2.2cm (L) \/ 2.13\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii Kitty Mold | Cat Cabochon Mold | Animal Silic...
Sold Out
{"id":9753271809,"title":"Kawaii Kitty Mold | Cat Cabochon Mold | Animal Silicone Mould | UV Resin Soft Mold | Epoxy Resin Art (39mm x 26mm)","handle":"kawaii-kitty-mold-cat-cabochon-mold-animal-silicone-mould-uv-resin-soft-mold-epoxy-resin-art","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.6cm (L) \/ 1.54\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T23:15:31-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986876481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1120","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kawaii Kitty Mold | Cat Cabochon Mold | Animal Silicone Mould | UV Resin Soft Mold | Epoxy Resin Art (39mm x 26mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1120.jpg?v=1517669820"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1120.jpg?v=1517669820","options":["Title"],"media":[{"alt":"Kawaii Kitty Mold | Cat Cabochon Mold | Animal Silicone Mould | UV Resin Soft Mold | Epoxy Resin Art (39mm x 26mm) - MiniatureSweet","id":326736216113,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1120.jpg?v=1517669820"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1120.jpg?v=1517669820","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.6cm (L) \/ 1.54\" (W) x 1.02\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal...
Sold Out
{"id":9753234753,"title":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm)","handle":"kitty-cat-mold-resin-cabochon-mold-kawaii-animal-mould-uv-resin-silicone-mold-soft-flexible-mold-epoxy-resin-craft-supplies","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.2cm (L) \/ 1.54\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T22:47:54-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986671361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1119","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819","options":["Title"],"media":[{"alt":"Kitty Cat Mold | Resin Cabochon Mold | Kawaii Animal Mould | UV Resin Silicone Mold | Soft Flexible Mold | Epoxy Resin Craft Supplies (39mm x 22mm) - MiniatureSweet","id":326736150577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1119.jpg?v=1517669819","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.9cm (W) x 2.2cm (L) \/ 1.54\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Cat UV Resin Mold | Kawaii Cabochon Mould | Animal M...
Sold Out
{"id":9753212609,"title":"Cat UV Resin Mold | Kawaii Cabochon Mould | Animal Mold | Flexible Epoxy Resin Mold | Soft Silicone Mold (34mm x 31mm)","handle":"cat-uv-resin-mold-kawaii-cabochon-mould-animal-mold-flexible-epoxy-resin-mold-soft-silicone-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 3.1cm (L) \/ 1.34\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T22:24:31-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986554689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1118","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cat UV Resin Mold | Kawaii Cabochon Mould | Animal Mold | Flexible Epoxy Resin Mold | Soft Silicone Mold (34mm x 31mm)","public_title":null,"options":["Default Title"],"price":99,"weight":6,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1118.jpg?v=1517669817"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1118.jpg?v=1517669817","options":["Title"],"media":[{"alt":"Cat UV Resin Mold | Kawaii Cabochon Mould | Animal Mold | Flexible Epoxy Resin Mold | Soft Silicone Mold (34mm x 31mm) - MiniatureSweet","id":326736085041,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1118.jpg?v=1517669817"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1118.jpg?v=1517669817","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eKawaii cat silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 3.4cm (W) x 3.1cm (L) \/ 1.34\" (W) x 1.22\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Kawaii UV Resin Mould | Cat Mold | Animal Cabochon M...
$0.99 USD
{"id":9753103169,"title":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm)","handle":"kawaii-uv-resin-mould-cat-mold-animal-cabochon-mold-flexible-silicone-mold-epoxy-resin-soft-mold","description":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSilicone flexible mold in kawaii cat shape. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.2cm (L) \/ 1.57\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2016-11-11T19:28:00-11:00","created_at":"2017-06-24T21:46:58-11:00","vendor":"MiniatureSweet","type":"Animal Mold","tags":["animal mold","cabochon mold","cat mold","clear mold","decoden supplies","embellishment mold","epoxy resin","flexible mold","kawaii crafts","kawaii mold","kitten mold","kitty mold","resin art","Resin Cabochon","resin crafts","resin jewellery","resin jewelry","resin mold","Resin Mould","Silicone Mold","UV resin"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35986237441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1117","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm)","public_title":null,"options":["Default Title"],"price":99,"weight":5,"compare_at_price":null,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816","options":["Title"],"media":[{"alt":"Kawaii UV Resin Mould | Cat Mold | Animal Cabochon Mold | Flexible Silicone Mold | Epoxy Resin Soft Mold (40mm x 22mm) - MiniatureSweet","id":326735331377,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1117.jpg?v=1517669816","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-pane active\" id=\"tab_detail\" role=\"tabpanel\"\u003e\n\u003cp\u003eSilicone flexible mold in kawaii cat shape. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc\u003c\/p\u003e\n\u003cp\u003e★ Measurement: approx. 4cm (W) x 2.2cm (L) \/ 1.57\" (W) x 0.87\" (L)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: If you use it on clay, since some clay are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e"}
Water Effect Flexible Mold in Rectangle Shape | Rect...
$0.99 USD
{"id":9393777281,"title":"Water Effect Flexible Mold in Rectangle Shape | Rectangular Mold with Water Ripple | Epoxy Resin Jewellery Making | Clear UV Resin Silicone Mould (25mm x 34mm)","handle":"water-effect-flexible-mold-in-rectangle-shape-rectangular-mold-with-water-ripple-epoxy-resin-jewellery-making-clear-uv-resin-silicone-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.5cm (W) x 3.4cm (L) x 0.9cm (Depth) \/ 0.98\" (W) x 1.34\" (L) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-05-09T20:32:47-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Other Mold","tags":["Clear Mold","epoxy resin","flexible mold","Koi pond","rectangle mold","rectangular mold","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","swimming pool","uv resin","water drop","Water Effect","water mold","Water Ripple"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34025647873,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1112","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Water Effect Flexible Mold in Rectangle Shape | Rectangular Mold with Water Ripple | Epoxy Resin Jewellery Making | Clear UV Resin Silicone Mould (25mm x 34mm)","public_title":null,"options":["Default Title"],"price":99,"weight":10,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1112.jpg?v=1517669033"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1112.jpg?v=1517669033","options":["Title"],"media":[{"alt":"Water Effect Flexible Mold in Rectangle Shape | Rectangular Mold with Water Ripple | Epoxy Resin Jewellery Making | Clear UV Resin Silicone Mould (25mm x 34mm) - MiniatureSweet","id":286529454129,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1112.jpg?v=1517669033"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1112.jpg?v=1517669033","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.5cm (W) x 3.4cm (L) x 0.9cm (Depth) \/ 0.98\" (W) x 1.34\" (L) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Water Effect Silicone Mold in Square Shape | Water R...
$0.99 USD
{"id":9393737921,"title":"Water Effect Silicone Mold in Square Shape | Water Ripple Mould | Clear UV Resin Mold | Epoxy Resin Flexible Mold | Dollhouse Koi Pond Making (26mm x 26mm)","handle":"water-effect-silicone-mold-in-square-shape-water-ripple-mould-clear-uv-resin-mold-epoxy-resin-flexible-mold-dollhouse-koi-pond-making","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 2.6cm (L) x 0.9cm (Depth) \/ 1.02\" (W) x 1.02\" (L) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-05-09T20:26:44-11:00","vendor":"MiniatureSweet","type":"Shape Mold, Other Mold","tags":["Clear Mold","epoxy resin","flexible mold","Koi pond","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","silicone mold","soft mold","Square Mold","swimming pool","uv resin","water drop","Water Effect","water mold","Water Ripple"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34025286401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1111","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Water Effect Silicone Mold in Square Shape | Water Ripple Mould | Clear UV Resin Mold | Epoxy Resin Flexible Mold | Dollhouse Koi Pond Making (26mm x 26mm)","public_title":null,"options":["Default Title"],"price":99,"weight":9,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1111.jpg?v=1517669031"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1111.jpg?v=1517669031","options":["Title"],"media":[{"alt":"Water Effect Silicone Mold in Square Shape | Water Ripple Mould | Clear UV Resin Mold | Epoxy Resin Flexible Mold | Dollhouse Koi Pond Making (26mm x 26mm) - MiniatureSweet","id":286527127601,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1111.jpg?v=1517669031"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1111.jpg?v=1517669031","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 2.6cm (W) x 2.6cm (L) x 0.9cm (Depth) \/ 1.02\" (W) x 1.02\" (L) x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Water Ripple Flexible Mold in Circle Shape | Round W...
$0.99 USD
{"id":9393457665,"title":"Water Ripple Flexible Mold in Circle Shape | Round Water Effect Mold | UV Resin Crafts | Epoxy Resin Silicone Mold | Soft Clear Mould (30mm x 9mm)","handle":"water-ripple-flexible-mold-in-circle-shape-round-water-effect-mold-uv-resin-crafts-epoxy-resin-silicone-mold-soft-clear-mould","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (Diameter) x 0.9cm (Depth) \/ 1.18\" x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-12-13T21:20:00-11:00","created_at":"2017-05-09T19:44:35-11:00","vendor":"MiniatureSweet","type":"Round Mold, Other Mold","tags":["circle mold","Clear Mold","epoxy resin","flexible mold","Koi pond","resin art","resin crafts","resin jewellery","resin jewelry","resin mold","resin mould","round mold","silicone mold","soft mold","swimming pool","uv resin","water drop","Water Effect","water mold","Water Ripple"],"price":99,"price_min":99,"price_max":99,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34022819009,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MD1110","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Water Ripple Flexible Mold in Circle Shape | Round Water Effect Mold | UV Resin Crafts | Epoxy Resin Silicone Mold | Soft Clear Mould (30mm x 9mm)","public_title":null,"options":["Default Title"],"price":99,"weight":9,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1110.jpg?v=1517669030"],"featured_image":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1110.jpg?v=1517669030","options":["Title"],"media":[{"alt":"Water Ripple Flexible Mold in Circle Shape | Round Water Effect Mold | UV Resin Crafts | Epoxy Resin Silicone Mold | Soft Clear Mould (30mm x 9mm) - MiniatureSweet","id":286507434033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1110.jpg?v=1517669030"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.miniaturesweethk.com\/cdn\/shop\/products\/MD1110.jpg?v=1517669030","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane active\" id=\"tab_detail\"\u003e\n\u003cp\u003eFlexible water ripple silicone mold. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.\u003c\/p\u003e\n\u003cp\u003e★Measurement: approx. 3cm (Diameter) x 0.9cm (Depth) \/ 1.18\" x 0.37\" (Depth)\u003c\/p\u003e\n\u003cp\u003e★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.\u003c\/p\u003e\n\u003cp\u003e★ Tips on clay: Since different clays have different features, there are clays which are sticky and softer than the others and so affect the pop out effect, in this case, we recommend you to put the mold (with the clay inside) into the fridge for around 5-10 minutes before you pop the clay out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}