Hollow Square Cube Mold (3 Cavity) | Resin Shaker Charm DIY | Cube Cabochon Silicone Mold | Resin Jewellery Mold | Flexible UV Resin Mould (20mm, 18mm & 16mm)
Hollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV...
Dispatch within 2 business days
Secret gifts for all orders
Earn 10 reward points for every US$1 spent
Hollow cube silicone mold in 3 sizes. No releasing agent is needed, finished work can be easily pop out from the mold. Excellent for UV resin, epoxy resin jewelry, cabochon making, etc.
You can use it with our square base and pendant bail molds (https://goo.gl/HvS9mB) to make shaker charm as shown in the 4th picture.
*If you use epoxy resin, please let the resin rest until there is no bubbles before pouring, otherwise, there will be lots of bubble created during the curing process as the air has no way to get out of a closed mold.
**You need to fill the mold pretty full, place the other part on top slowly, the excess will flow along the sides, so you need to place a silicone mat underneath. (If you fill the mold with little amount of resin, it will create gap / bubbles)
- Big: approx. 2cm (W) x 1cm (Depth) / 0.77" (W) x 0.39" (Depth)
- Medium: approx. 1.8cm (W) x 0.9cm (Depth) / 0.7" (W) x 0.37" (Depth)
- Small: approx. 1.6cm (W) x 0.8cm (Depth) / 0.62" (W) x 0.32" (Depth)
★ Can be washed with hot, soapy water. But do not wash mold with abrasive pads or cleaning agents.